2SA0879 - Silicon PNP Epitaxial Transistor

부품번호

2SA0879 기능

기능

Silicon PNP Epitaxial Transistor

제조업체

Panasonic Semiconductor

로고

2SA0879 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.

전체 4 페이지수

미리보기를 사용할 수 없습니다

Transistors

2SA0879 (2SA879)

Silicon PNP epitaxial planar type

For general amplification

Complementary to 2SC1573

■ Features

• High collector-emitter voltage (Base open) VCEO

■ Absolute Maximum Ratings Ta = 25°C

Parameter

Symbol Rating

Collector-base voltage (Emitter open)

Collector-emitter voltage (Base open)

Emitter-base voltage (Collector open)

Collector current

Peak collector current

Collector power dissipation

Junction temperature

Storage temperature

VCBO

VCEO

VEBO

ICP

Tstg

−250

−200

−5

−70

−100

150

−55 to +150

Unit

°C

5.9±0.2

Unit: mm

4.9±0.2

0.7±0.1

0.45+–00..12

(1.27)

1 : Emitter

123

2 : Collector

3 : Base

2.54±0.15

EIAJ : SC-51

TO-92L-A1 Package

■ Electrical Characteristics Ta = 25°C ± 3°C

Parameter

Symbol

Conditions

Min Typ Max Unit

Collector-emitter voltage (Base open) VCEO IC = −100 µA, IB = 0

−200

Emitter-base voltage (Collector open) VEBO IE = −1 µA, IC = 0 −5 V

Forward current transfer ratio *

hFE VCE = −10 V, IC = −5 mA

60 220 

Collector-emitter saturation voltage

VCE(sat) IC = −50 mA, IB = −5 mA

−1.5 V

Transition frequency

fT VCB = −10 V, IE = 10 mA, f = 200 MHz 50 80

MHz

Collector output capacitance

(Common base, input open circuited)

Cob VCB = −10 V, IE = 0, f = 1 MHz

5 10 pF

Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors.

2. *: Rank classification

Rank

hFE

60 to 150

100 to 220

Publication date: November 2002

www.DataSheet.in

Note) The part number in the parenthesis shows conventional part number.

SJC00006BED

Request for your special attention and precautions in using the technical information

and semiconductors described in this material

(1) An export permit needs to be obtained from the competent authorities of the Japanese Government

if any of the products or technologies described in this material and controlled under the "Foreign

Exchange and Foreign Trade Law" is to be exported or taken out of Japan.

(2) The technical information described in this material is limited to showing representative characteris-

tics and applied circuits examples of the products. It neither warrants non-infringement of intellec-

tual property right or any other rights owned by our company or a third party, nor grants any license.

(3) We are not liable for the infringement of rights owned by a third party arising out of the use of the

product or technologies as described in this material.

(4) The products described in this material are intended to be used for standard applications or general

electronic equipment (such as office equipment, communications equipment, measuring instru-

ments and household appliances).

Consult our sales staff in advance for information on the following applications:

• Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment,

combustion equipment, life support systems and safety devices) in which exceptional quality and

reliability are required, or if the failure or malfunction of the products may directly jeopardize life or

harm the human body.

• Any applications other than the standard applications intended.

(5) The products and product specifications described in this material are subject to change without

notice for modification and/or improvement. At the final stage of your design, purchasing, or use of

the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that

the latest specifications satisfy your requirements.

(6) When designing your equipment, comply with the guaranteed values, in particular those of maxi-

mum rating, the range of operating power supply voltage, and heat radiation characteristics. Other-

wise, we will not be liable for any defect which may arise later in your equipment.

Even when the products are used within the guaranteed values, take into the consideration of

incidence of break down and failure mode, possible to occur to semiconductor products. Measures

on the systems such as redundant design, arresting the spread of fire or preventing glitch are

recommended in order to prevent physical injury, fire, social damages, for example, by using the

products.

(7) When using products for which damp-proof packing is required, observe the conditions (including

shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets

are individually exchanged.

(8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written

permission of Matsushita Electric Industrial Co., Ltd.

www.DataSheet.in

2002 JUL

4페이지

구 성

총 4 페이지수

다운로드

[ 2SA0879.PDF 데이터시트 ]

본 사이트를 통해서 주요 제조업체의 전자 부품 및 장치의 기술 사양을 쉽게 찾을 수 있습니다.

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트 데이터베이스를 제공합니다.

구매 문의

일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ]

2SA0879 데이터시트 PDF

특징 및 기능

PDF 형식의 2SA0879 자료 제공

관련 데이터시트

사이트 맺음말

부품번호	상세설명 및 기능	제조사
2SA0879	Silicon PNP Epitaxial Transistor	Panasonic Semiconductor