|
|
PDF B7B-PH Data sheet ( Hoja de datos )
| Número de pieza | B7B-PH | |
| Descripción | Disconnectable Crimp style connectors | |
| Fabricantes | JST | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de B7B-PH (archivo pdf) en la parte inferior de esta página. Total 7 Páginas | ||
|
No Preview Available !
Crimp
2.0mm
(.079") pitch
PH CONNECTOR
Disconnectable Crimp style connectors
Emboss Tape
This is a thin, low-profile 2.0mm (.079")
pitch connector 7.5mm (.295") in height
after mounting and 4.5mm (.177") in width.
It is designed to meet the demand for
high-density connection of internal wires to
printed circuit boards. It is compact, highly
reliable and low in cost.
Features ––––––––––––––––––––––––
• Reliable contact
The contact has long dimples near the center to ensure a good
connection at all times, even under conditions of vibration and
mechanical abuse, and when used with low voltage and low
current circuits.
• Fully shrouded header
The fully shrouded header has walls on all four sides to
prevent improper connection to the mating housing and to
prevent the instruction of flux and other contaminants.
• Printed circuit board retention mechanism
The solder side of the header has a retention mechanism that
prevents it from floating during soldering. As a result, the
header can be positioned accurately.
• Surface mount model (SMT)
This connector is also available in a surface mount
configuration. Its housing is made of heat resistant resin so
that it is not adversely affected during reflow soldering.
Because of its tiny size and ability to be surface mounted, this
connector meets the demand for high-density mounting of
components inside electronic products.
www.DataSheet.in
Specifications –––––––––––––––––––
• Current rating: 2A AC, DC (AWG #24)
• Voltage rating: 100V AC, DC
• Temperature range: -25˚C to +85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/10m Ω max.
After environmental testing/20m Ω max.
• Insulation resistance: 1,000M Ω min.
• Withstanding voltage: 800V AC/minute
• Applicable wire: AWG #32 to #24
• Applicable PC board thickness: 0.8 to 1.6mm(.031" to .063")
* Contact JST if Lead-Free product is required.
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
Standards ––––––––––––––––––––––
0 Recognized E60389
1Certified LR20812
2R75087
47
1 page  
PH CONNECTOR
SMT type shrouded header –––––––––––––––––––––––––––––––––––––––––––––––––
•The shrouded headers are interchangeable with those of the KR, KRD and CR insulation displacement connectors.
•SMT type shrouded headers are not TU¨ V approved.
SM3, SM4 type
Top entry type
B
2.975
(.117)
A
2.0(.079)
5.0
(.197)
1.9(.075)
[2.0
(.079)]
SM3 type
Cir-
cuits
2
3
Model No.
Dimensions mm(in.)
Top entry
type
Side entry
type
B
A
Top entry type Side entry type
B 2B-PH-SM3-TB S 2B-PH-SM3-TB 2.0( .079) 7.95( .313) 7.9( .311)
B 3B-PH-SM3-TB S 3B-PH-SM3-TB 4.0( .157) 9.95( .392) 9.9( .390)
Q'ty /
reel
1,000
1,000
4 B 4B-PH-SM3-TB S 4B-PH-SM3-TB 6.0( .236) 11.95( .470) 11.9( .469) 1,000
5 B 5B-PH-SM3-TB S 5B-PH-SM3-TB 8.0( .315) 13.95( .549) 13.9( .547) 1,000
6 B 6B-PH-SM3-TB S 6B-PH-SM3-TB 10.0( .394) 15.95( .628) 15.9( .626) 1,000
7 B 7B-PH-SM3-TB S 7B-PH-SM3-TB 12.0( .472) 17.95( .707) 17.9( .705) 1,000
1.4
(.055)
Circuit No.1
2.2
(.087)
8 B 8B-PH-SM3-TB S 8B-PH-SM3-TB 14.0( .551) 19.95( .785) 19.9( .783) 1,000
9 B 9B-PH-SM3-TB S 9B-PH-SM3-TB 16.0( .630) 21.95( .864) 21.9( .862) 1,000
10 B10B-PH-SM3-TB S10B-PH-SM3-TB 18.0( .709) 23.95( .943) 23.9( .941) 1,000
Side entry type
11 B11B-PH-SM3-TB – 20.0( .787) 25.95(1.022) 25.9(1.020) 1,000
12 B12B-PH-SM3-TB S12B-PH-SM3-TB 22.0( .866) 27.95(1.100) 27.9(1.098) 1,000
13 B13B-PH-SM3-TB S13B-PH-SM3-TB 24.0( .945) 29.95(1.179) 29.9(1.177) 1,000
14 B14B-PH-SM3-TB S14B-PH-SM3-TB 26.0(1.024) 31.95(1.258) 31.9(1.256) 1,000
15 B15B-PH-SM3-TB S15B-PH-SM3-TB 28.0(1.102) 33.95(1.337) 33.9(1.335) 1,000
16 B16B-PH-SM3-TB – 30.0(1.181) 35.95(1.415) 35.9(1.413) 1,000
2.0
2.95 (.079)
(.116)
A
B
1.6
(.063)
6.0(.236)
[2.6
(.102)]
Material and Finish
Post: Copper alloy, copper-undercoated, tin/lead-plated
Wafer: Nylon 46, UL94V-0, natural (white)
Solder tab: Brass, copper-undercoated, tin/lead-plated
Note: Contact JST for the top entry type headers with suction cap.
SM4 type
Cir-
cuits
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Model No.
Dimensions mm(in.)
Top entry
type
Side entry
type
B
A Top entry type Side entry type
B 2B-PH-SM4-TB S 2B-PH-SM4-TB 2.0( .079) 7.95( .313) 7.9( .311)
B 3B-PH-SM4-TB S 3B-PH-SM4-TB 4.0( .157) 9.95( .392) 9.9( .390)
B 4B-PH-SM4-TB S 4B-PH-SM4-TB 6.0( .236) 11.95( .470) 11.9( .469)
B 5B-PH-SM4-TB S 5B-PH-SM4-TB 8.0( .315) 13.95( .549) 13.9( .547)
B 6B-PH-SM4-TB S 6B-PH-SM4-TB 10.0( .394) 15.95( .628) 15.9( .626)
B 7B-PH-SM4-TB S 7B-PH-SM4-TB 12.0( .472) 17.95( .707) 17.9( .705)
B 8B-PH-SM4-TB S 8B-PH-SM4-TB 14.0( .551) 19.95( .785) 19.9( .783)
B 9B-PH-SM4-TB S 9B-PH-SM4-TB 16.0( .630) 21.95( .864) 21.9( .862)
B10B-PH-SM4-TB S10B-PH-SM4-TB 18.0( .709) 23.95( .943) 23.9( .941)
B11B-PH-SM4-TB S11B-PH-SM4-TB 20.0( .787) 25.95(1.022) 25.9(1.020)
B12B-PH-SM4-TB S12B-PH-SM4-TB 22.0( .866) 27.95(1.100) 27.9(1.098)
B13B-PH-SM4-TB S13B-PH-SM4-TB 24.0( .945) 29.95(1.179) 29.9(1.177)
B14B-PH-SM4-TB S14B-PH-SM4-TB 26.0(1.024) 31.95(1.258) 31.9(1.256)
B15B-PH-SM4-TB S15B-PH-SM4-TB 28.0(1.102) 33.95(1.337) 33.9(1.335)
B16B-PH-SM4-TB
–
30.0(1.181) 35.95(1.415)
–
Q'ty /
reel
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
Material and Finish
Post: Copper alloy, copper-undercoated, tin-plated
Wafer: 6T nylon, UL94V-0, natural (white)
Solder tab: Brass, nickel-undercoated, tin/copper alloy-plated
Note: Contact JST for the top entry type headers with suction cap.
<For reference> As the color identification,
the following alphabet shall be put in the underlined part.
For availability, delivery and minimum order quantity, contact JST.
ex. B2B-PH-SM3-oo-TB
(blank)…natural (white)
R…red E…blue M…green L…lemon yellow K…black
51
www.DataSheet.in
5 Page | ||
| Páginas | Total 7 Páginas | |
| PDF Descargar | [ Datasheet B7B-PH.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| B7B-PH | Disconnectable Crimp style connectors | JST |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |