|
|
|
부품번호 | LUR9033-TR3 기능 |
|
|
기능 | SURFACE MOUNT TAPE AND REEL | ||
제조업체 | LIGITEK electronics | ||
로고 | |||
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Onwlyww.DataSheet4U.com
SURFACE MOUNT TAPE AND REEL
Pb
Lead-Free Parts
LUR9033/TR3
DATA SHEET
DOC. NO : QW0905-LUR9033/TR3
REV.
:A
DATE
: 30 - Jul - 2005
PART NO. LUR9033/TR3
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
www.DataSheet4U.com
Page 3/7
Absolute Maximum Ratings at Ta=25
Parameter
Forward Current
Peak Forward Current
Duty 1/10@10KHz
Power Dissipation
Reverse Current @5V
Operating Temperature
Storage Temperature
Soldering Temperature
Symbol
IF
IFP
PD
Ir
Topr
Tstg
Tsol
Ratings
UR
UNIT
40 mA
120 mA
120 mW
10 A
-40 ~ +85
-40 ~ +100
Max 260 for 5 sec Max
(2mm from body)
Typical Electrical & Optical Characteristics (Ta=25 )
PART NO MATERIAL
COLOR
LUR9033/TR3 GaAlAs
Emitted Lens
Red Water Clear
Peak
wave
length
Pnm
Spectral Forward Luminous Viewing
halfwidth voltage
intensity angle
nm @20 mA(V) @20mA(mcd) 2 1/2
(deg)
Min. Max. Min. Typ.
660 20 1.5 2.4 350 650 20
Note : 1.The forward voltage data did not including 0.1V testing tolerance.
2. The luminous intensity data did not including 15% testing tolerance.
4페이지 PART NO. LUR9033/TR3
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
www.DataSheet4U.com
Page 6/7
Precautions For Use:
Storage time:
1.The operation of Temperatures and RH are : 5 ~35 ,RH60%.
2.Once the package is opened, the products should be used within a week.
Otherwise, they should be kept in a damp proof box with descanting agent.
Considering the tape life, we suggest our customers to use our products within
a year(from production date).
3.If opened more than one week in an atmosphere 5 ~ 35 ,RH60%,
they should be treated at 60 5 fo r 15hrs.
Drive Method:
LED is a current operated device, and therefore, requirer some kind of current limiting incorporated into
the driver circuit. This current limiting typically takes the form of a current limiting resistor placed in series
with the LED.
Consider worst case voltage variations than could occur across the current limiting resistor. The forwrd
current should not be allowed to change by more than 40 % of its desired value.
Circuit model A
LED
Circuit model B
LED
(A) Recommended circuit.
(B) The difference of brightness between LED could be found due to the VF-IF characteristics of LED.
Cleaning:
Use alcohol-based cleaning solvents such as isopropyl alcohol to clean the LED.
ESD(Electrostatic Discharge):
Static Electricity or power surge will damage the LED. Use of a conductive wrist band or anti-electrosatic
glove is recommended when handing these LED. All devices, equipment and machinery must be properly
grounded.
7페이지 | |||
구 성 | 총 8 페이지수 | ||
다운로드 | [ LUR9033-TR3.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
LUR9033-TR1 | SURFACE MOUNT TAPE AND REEL | LIGITEK electronics |
LUR9033-TR2 | SURFACE MOUNT TAPE AND REEL | LIGITEK electronics |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |