|
|
|
부품번호 | XPS-2810BLWG 기능 |
|
|
기능 | 1270 nm TX / 1330 nm RX 10.3 Gbps 1-Fiber Single-Mode LC XFP Transceiver | ||
제조업체 | Optoway Technology | ||
로고 | |||
Optoway
1
XPB-2810LWG
***********************************************************************************************************************************************************************
XPB-2810LWG / XPS-2810BLWG
(RoHS Compliant)
1270 nm TX / 1330 nm RX , 10.3 Gbps 1-Fiber Single-Mode LC XFP Transceiver
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
z 1-Fiber Bi-Directional XFP Optical Transceiver
XPB-2810LWG series transceiver is designed for
z Up to 10.3 Gbps Bi-directional Data Links
bi-directional serial optical data communications such as
z Compliant with XFP MSA
IEEE 802.3ae 10GBASE-BX by using 1270 nm transmitter
z Compliant to IEEE 802.3ae 10GBASE-BX
and 1330 nm receiver.
z SFF-8472 Digital Diagnostic Function
The transceiver consists of two sections: The transmitter
z Simplex LC Connector
section uses a multiple quantum well 1270 nm DFB laser
z 1270 nm DFB LD Transmitter
and is a class 1 laser compliant according to International
z 1330 nm Receiver
Safety Standard IEC 60825. The receiver section uses an
z Distance Up to 10 km
integrated 1330 nm detector preamplifier (IDP) mounted in
z 2-Wire Interface for Integrated Digital Diagnostic
an optical header and a limiting post-amplifier IC.
Monitoring
z XFI Loopback Mode
z No reference Clock required
z Only Required +3.3 V Power Supply
z Power Consumption < 2 W
z RoHS Compliant
z 0 to 70oC Operating : XPB-2810LWG
z -10 to 85oC Operating : XPB-2810BLWG
z Simplex LC Connector
The module is with the XFP 30-pin connector to allow
hot plug capability. Integrated Tx and Rx signal conditioners
provide high jitter-tolerance for full XFI compliance and no
external reference clock required. The internally ac coupled
high speed serial I/O simplifies interfacing to external
circuitry. Only single 3.3V power supply is needed. The
optical output can be disabled by LVTTL logic high-level
input of TX_DIS. Loss of signal (RX_LOS) output is
provided to indicate the loss of an input optical signal of
receiver.
APPLICATIONS
A serial EEPROM in the transceiver allows the user to
z 10GBASE-BX at 10.3125 Gb/s
z 10GBASE-BX at 9.953 Gb/s
access transceiver digital diagnostic monitoring and
configuration data via the 2-wire XFP Management
Interface. This interface uses a single address, A0h, with a
LASER SAFETY
This single-mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
memory map divided into a lower and upper area. Basic
digital diagnostic data is held in the lower area while specific
data is held in a series of tables in the high memory area.
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate 10GBASE Distance
(Gb/s)
(km)
XPB-2810LWG
10.3 BX 10
XPB-2810BLWG 10.3 BX 10
TX
(nm)
1270 DFB
1270 DFB
RX
(nm)
1330
1330
Package
LC XFP with DMI
LC XFP with DMI
Temp
(oC)
0 to 70
-10 to 85
RoHS
Compliant
Yes
Yes
www.DataSheet4U.com
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw 2008/11/1 V1.0
Optoway
4
XPB-2810LWG
***********************************************************************************************************************************************************************
Management Interface
The structure of the memory map is shown in Figure 1, which is accessible over a 2-wire serial interface at the 8-bit
address 1010000X (A0h). The normal 256 byte I2C address space is divided into low and upper blocks of 128 Bytes. The
lower block of 128 Bytes is always directly available and is used for the diagnostics and control function. Multiple blocks of
memories are available in the upper 128 Bytes of the address space. These are individually addressed through a table select
Byte which the user enters into a location in the lower address space. Thus, there is a total available address space of 128*256
= 32 Kbytes in this upper memory space. The contents of Table 01h are listed in Table 1 below. Please refer SFF INF-8077i
(Revision 4.5) for detailed information.
Figure 1. 2-wire Serial Digital Diagnostic Memory Map
Data Address
96 ~ 97
98 ~ 99
100 ~ 101
102 ~ 103
104 ~ 105
106 ~ 107
Table 1 Monitoring Specification
Parameter
Temperature
Reserved
Tx Bias
Tx Power
Rx Power
Vcc3
Accuracy
± 3oC
± 10%
± 2dB
± 2dB
± 3%
www.DataSheet4U.com
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw 2008/11/1 V1.0
4페이지 Optoway
7
XPB-2810LWG
***********************************************************************************************************************************************************************
Recommended Power Circuit Schematic
Optional
Host +5V
0.1μF
4.7μH
Host +3.3V
0.1μF
4.7μH
Optional
Host +1.8V
0.1μF
4.7μH
Optional
Host -5.2V
0.1μF
4.7μH
Host Board
VCC5
22μF
0.1μF
VCC3
22μF
0.1μF
VCC2
22μF
0.1μF
XFP Module
VEE5
22μF
0.1μF
Recommended Interface Circuit
Host Board
CML
SerDat Out+
Z=50Ω
SerDat Out-
Z=50Ω
TD +
TD -
CML
Vcc(+3.3V)
100Ω
SerDat In+
RD +
Z=50Ω
SerDat In-
RD -
Z=50Ω
REFCLKP
4.7K to 10KΩ
REFCLKN
RX_LOS
INTERRUPT
SDA
SCL
MOD_NR
M OD_a bs
TX_DIS
MOD_DeSel
P_Down/RST
XFP module
100Ω
CML
CML
100Ω
GND
VCC(+3 .3V)
10KΩ
www.DataSheet4U.com
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw 2008/11/1 V1.0
7페이지 | |||
구 성 | 총 9 페이지수 | ||
다운로드 | [ XPS-2810BLWG.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
XPS-2810BLWG | 1270 nm TX / 1330 nm RX 10.3 Gbps 1-Fiber Single-Mode LC XFP Transceiver | Optoway Technology |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |