Datasheet.kr   

XPS-4102BWG 데이터시트 PDF




Optoway Technology에서 제조한 전자 부품 XPS-4102BWG은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 XPS-4102BWG 자료 제공

부품번호 XPS-4102BWG 기능
기능 8.5Gb/s 1310 nm XFP Single-Mode Optical Transceiver
제조업체 Optoway Technology
로고 Optoway Technology 로고


XPS-4102BWG 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.



전체 9 페이지수

미리보기를 사용할 수 없습니다

XPS-4102BWG 데이터시트, 핀배열, 회로
Optoway
1
XPS-4102WG
***********************************************************************************************************************************************************************
XPS-4102WG / XPS-4102BWG / XPS-4102AWG
(RoHS Compliant)
8.5Gb/s 1310 nm XFP Single-Mode Optical Transceiver for 8G FC Applications
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Up to 8.5 Gb/s Bi-directional Data Link
l Complaint to XFP MSA
l Compliance with Fibre Channel FC-PI-4 800-SM-LC-I
l Compliant with 4G, 2G Fibre Channel
l Link Distance
XPS-4102WG series multi-rate 8G XFP transceiver is
designed for serial optical data communications such as 8G
Fiber Channel. It supports the 8.5Gbps transmission on
9/125 µm SMF.
The transceiver consists of two sections: The transmitter
--- 0 to 1400 m at 8.5 Gb/s
section consists of a directly modulated 1310 nm multiple
--- 0 to 5000 m at 4.25 Gb/s
quantum well laser, driver and signal conditioner. The
--- 0 to 10,000 m at 2.125Gb/s
l 1310 nm FP LD Transmitter
l XFI Loopback Mode
l 2-Wire Interface for Integrated Digital Diagnostic
receiver section incorporates a PIN photodiode integrated
with a trans-impedance preamplifier (TIA) and signal
conditioner.
The module is with the XFP 30-pin connector to allow
Monitoring
l No reference clock required
l Low Power Dissipation < 2W
l Only Required +3.3 V Power Supply
l RoHS 6/6 Compliant
l 0 to 70oC Operating: XPS-4102WG
l -10 to 85oC Operating: XPS-4102BWG
l -40 to 85oC Operating: XPS-4102AWG
l Duplex LC Connector
hot plug capability. Integrated Tx and Rx signal conditioners
provide high jitter-tolerance for full XFI compliance and no
external reference clock required. The internally ac coupled
high speed serial I/O simplifies interfacing to external
circuitry. Only single 3.3V power supply is needed. The
optical output can be disabled by LVTTL logic high-level
input of TX_DIS. Loss of signal (RX_LOS) output is
provided to indicate the loss of an input optical signal of
receiver.
APPLICATIONS
A serial EEPROM in the transceiver allows the user to
access transceiver digital diagnostic monitoring and
l Multi-rate 8x/4x/2x Fiber Channel
configuration data via the 2-wire XFP Management
Interface. This interface uses a single address, A0h, with a
STANDARD
l Compliant with XFP MSA
l Compliant with 8G FC
memory map divided into a lower and upper area. Basic
digital diagnostic data is held in the lower area while specific
data is held in a series of tables in the high memory area.
LASER SAFETY
This transceiver is a Class 1 laser product. It complies with
IEC-60825 and FDA 21 CFR 1040.10 and 1040.11. The
transceiver must be operated within the specified
temperature and voltage limits. The optical ports of the
module shall be terminated with an optical connector or with
a dust plug.
ORDER INFORMATION
P/No.
Bit Rate
(Gb/s)
Distance Wavelength
(m) (nm)
Package
XPS-4102WG
8 /4 /2
1400*
1310
XFP with DMI
XPS-4102BWG
8 /4 /2
1400*
1310
XFP with DMI
XPS-4102AWG
8 /4 /2
1400*
1310
XFP with DMI
*: 0 to 1400 m at 8.5 Gb/s, 0 to 5000 m at 4.25 Gb/s, and 10 km at FC 1x/2x.
Connector
LC
LC
LC
Temp
(oC)
0 to 70
-10 to 85
-40 to 85
RoHS
Compliant
Yes
Yes
Yes
www.DataSheet4U.com
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw 2008/5/1 V1.0




XPS-4102BWG pdf, 반도체, 판매, 대치품
Optoway
4
XPS-4102WG
***********************************************************************************************************************************************************************
Management Interface
The structure of the memory map is shown in Figure 1, which is accessible over a 2-wire serial interface at the 8-bit
address 1010000X (A0h). The normal 256 byte I2C address space is divided into low and upper blocks of 128 Bytes. The
lower block of 128 Bytes is always directly available and is used for the diagnostics and control function. Multiple blocks of
memories are available in the upper 128 Bytes of the address space. These are individually addressed through a table select
Byte which the user enters into a location in the lower address space. Thus, there is a total available address space of 128*256
= 32 Kbytes in this upper memory space. The contents of Table 01h are listed in Table 1 below. Please refer SFF INF-8077i
(Revision 4.5) for detailed information.
Figure 1. 2-wire Serial Digital Diagnostic Memory Map
Data Address
96 ~ 97
98 ~ 99
100 ~ 101
102 ~ 103
104 ~ 105
106 ~ 107
Table 1 Monitoring Specification
Parameter
Temperature
Tx Bias
Reserved
Tx Power
Rx Power
Vcc3
Accuracy
± 3oC
± 10%
± 2dB
± 2dB
± 3%
www.DataSheet4U.com
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw 2008/5/1 V1.0

4페이지










XPS-4102BWG 전자부품, 판매, 대치품
Optoway
7
XPS-4102WG
***********************************************************************************************************************************************************************
Recommended Power Circuit Schematic
Optional
Host +5V
0.1μF
4.7μH
Host +3.3V
0.1μF
4.7μH
Optional
Host +1.8V
0.1μF
4.7μH
Optional
Host -5.2V
0.1μF
4.7μH
Host Board
VCC5
22μF
0.1μF
VCC3
22μF
0.1μF
VCC2
22μF
0.1μF
XFP Module
VEE5
22μF
0.1μF
Recommended Interface Circuit
Host Board
CML
SerDat Out+
Z=50Ω
SerDat Out-
Z=50Ω
TD +
TD -
CML
Vcc(+3.3V)
4.7K to 10KΩ
www.DataSheet4U.com
100Ω
SerDat In+
Z=50Ω
RD +
SerDat In-
RD -
Z=50Ω
REFCLKP
REFCLKN
RX_LOS
INTERRUPT
SDA
SCL
MOD_NR
M OD_a bs
TX_DIS
MOD_DeSel
P_Down/RST
XFP module
100Ω
CML
CML
100Ω
GND
VCC(+3 .3V)
10KΩ
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw 2008/5/1 V1.0

7페이지


구       성 총 9 페이지수
다운로드[ XPS-4102BWG.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
XPS-4102BWG

8.5Gb/s 1310 nm XFP Single-Mode Optical Transceiver

Optoway Technology
Optoway Technology

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵