|
|
PDF AWT6332 Data sheet ( Hoja de datos )
| Número de pieza | AWT6332 | |
| Descripción | LINEAR POWER AMPLIFIER MODULE | |
| Fabricantes | ANADIGICS | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de AWT6332 (archivo pdf) en la parte inferior de esta página. Total 8 Páginas | ||
|
No Preview Available !
FEATURES
• InGaP HBT Technology
• High Efficiency:
37 % @ +28 dBm output
• Zero Quiescent Current in Switch Mode
• Internal Voltage Regulation
• Optimized for a 50 Ω System
• Low Profile Surface Mount Package: 1 mm
• CDMA 1XRTT, 1xEV-DO Compliant
• RoHS-Compliant Package, 250 oC MSL-3
APPLICATIONS
• CDMA/EVDO PCS-band Wireless Handsets and
Data Devices
PRODUCT DESCRIPTION
The AWT6332 is a new product in the revolutionary
ZeroIC™ PA family. The AWT6332 uses ANADIGICS’
exclusive InGaP-Plus™ technology, which combines
HBT and pHEMT devices on the same die, to enable
state-of-the-art reliability, temperature stability, and
ruggedness.
The AWT6332 has a unique architecture with two RF
inputs. One input drives the power amplifier while the
other input drives an RF switch that bypasses the
power amplifier, going directly to the RF output. The
mode control logic selects the PA or the RF switch. In
AWT6332
ZeroICTM PCS/CDMA 3.4V/28dBm
Linear Power Amplifier Module
Data Sheet - Rev 2.1
M27 Package
10 Pin 3 mm x 3 mm x 1 mm
Surface Mount Module
RF switch mode, current consumption is less than 10
A, reducing the average current consumption 70%
more than a HELP2™ PA over the CDG profile. Its
integrated voltage regulator eliminates the need for
external components further reducing size and BOM
cost. The 3 mm x 3 mm x 1 mm surface mount package
incorporates matching networks optimized for output
power, efficiency, and linearity in a 50 system.
www.DataSheet4U.com
Figure 1: Block Diagram
09/2008
1 page  
APPLICATION INFORMATION
To ensure proper performance, refer to all related
Application Notes on the ANADIGICS web site:
http://www.anadigics.com
Shutdown Mode
The power amplifier may be placed in a shutdown
mode by applying a logic low levels (see Operating
Ranges table) to both the VEN and VMODE voltages.
AWT6332
Power Modes
The power amplifier may be placed in either a Low
Power mode or a High Power mode by applying the
appropriate logic level (see Operating Ranges table)
to the VMODE voltage. The Power Control table lists
the recommended modes of operation for various
applications.
Table 5: Power Control
APPLICATION
POUT
LEVELS
POWER
MODE
VEN
VMODE
CDMA - Switch Bypass
-*
Low +2.4 V 0 V
Shutdown
-* Low 0 V +2.4 V
CDMA - PA
All High +2.4 V +2.4 V
Shutdown
-
Shutdown 0 V
0V
*Dependent upon typical output power of Transceiver and phone board design.
www.DataSheet4U.com
Figure 3: Application Circuit
Data Sheet - Rev 2.1
09/2008
5
5 Page | ||
| Páginas | Total 8 Páginas | |
| PDF Descargar | [ Datasheet AWT6332.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| AWT6331 | Linear Power Amplifer Module | ANADIGICS |
| AWT6332 | LINEAR POWER AMPLIFIER MODULE | ANADIGICS |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |