|
|
|
부품번호 | SPI5012 기능 |
|
|
기능 | SMD POWER INDUCTORS | ||
제조업체 | Superworld Electronics | ||
로고 | |||
SMD POWER INDUCTORS (PRELIMINARY) SPI5012 SERIES
1. PART NO. EXPRESSION :
SPI5012-1R0NZF
(a) (b)
(c) (d)(e)(f)
(a) Series code
(b) Dimension code
(c) Inductance code : 1R0 = 1.0uH
(d) Tolerance code : M = ±20%, N = ±30%
(e) Z : Standard part
(f) F : RoHS Compliant
2. CONFIGURATION & DIMENSIONS :
A EDE
G
Marking
5.4
5.4
OR
2.5
1.4
Recommended PCB Pattern
Unit:m/m
ABCDEF G
5.0±0.2 5.0±0.3 1.2 Max. 2.7 Typ 1.16 Typ 2.0 Typ 1.5 Typ
3. MATERIALS :
(a) Core : Ferrite
(b) Wire : Polyurethane Enamelled Copper Wire
(c) Terminal Clip : C5191
(d) Adhesive : Epoxy
(e) Ink : 70000-00101
www.DataSheet4U.com
NOTE : Specifications subject to change without notice. Please check our website for latest information.
10.02.2010
SUPERWORLD ELECTRONICS (S) PTE LTD
PG. 1
SMD POWER INDUCTORS (PRELIMINARY) SPI5012 SERIES
6. RELIABILITY & TEST CONDITION :
ITEM
Electrical Characteristics Test
Dielectric withstand voltage
PERFORMANCE
There shall be no damage or problems.
Temperature characteristics
ǻL/L20°C<±10%
0~2000 ppm/°C
High temperature storage
ǻL/Lo<±10%
There shall be no mechanical damage.
TEST CONDITION
AC 100V voltage shall be applied for 1 minute across the
top surface and the terminal of this sample
The test shall be performed after the sample has stabilized
in an ambient temperature of -20 to +85°C,and the value
calculated based on the value applicable in a normal
temperature and normal humidity shall be ǻL/L20°C<±10%.
The sample shall be left for 96±4 hours in an atmosphere
with a temperature of 85±2°C and a normal humidity.
Upon completion of the measurement shall be made after
the sample has been left in a normal temperature and
normal humidity for 1 hour.
Low temperature storage
Change of temperature
Moisture storage
ǻL/Lo<±10%
There shall be no mechanical damage.
The sample shall be left for 96±4 hours in an atmosphere
with a temperature of -25±3°C.
Upon completion of the test, the measurement shall be
made after the sample has been left in a normal temperature
and normal humidity for 1 hour.
ǻL/Lo<±10%
There shall be no other damage of problems
The sample shall be subject to 5 continuous cycles, such as
shown in the table 2 below and then it shall be subjected to
standard atmospheric conditions for 1 hour, after which
measurement shall be made.
Temperature
Duration
-25±3°C
1 (Thermostat No.1) 30 min.
Standard
5 sec. or less
2 atmospheric No.1ĺNo.2
85±2°C
3 (Thermostat No.2) 30 min.
4
Standard
atmospheric
5 sec. or less
No.2ĺNo.1
ǻL/Lo<±10%
There shall be no mechanical damage.
The sample shall be left for 96±4 hours in a temperature of
40±2°C and a humidity(RH) of 90~95%.
Upon completion of the test, the measurement shall be
made after the sample has been left in a normal temperature
and normal humidity more than 1 hour.
www.DataSheet4U.com
NOTE : Specifications subject to change without notice. Please check our website for latest information.
10.02.2010
SUPERWORLD ELECTRONICS (S) PTE LTD
PG. 4
4페이지 | |||
구 성 | 총 5 페이지수 | ||
다운로드 | [ SPI5012.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
SPI5012 | SMD POWER INDUCTORS | Superworld Electronics |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |