|
|
PDF E6651A Data sheet ( Hoja de datos )
| Número de pieza | E6651A | |
| Descripción | Mobile WiMAX test set | |
| Fabricantes | Agilent(Hewlett-Packard) | |
| Logotipo | .gif "Agilent(Hewlett-Packard)"){kind=logo} |
|
Hay una vista previa y un enlace de descarga de E6651A (archivo pdf) en la parte inferior de esta página. Total 8 Páginas | ||
|
No Preview Available !
Agilent E6651A
Mobile WiMAX™ test set
Technical Overview
www.DataSheet4U.com
Accelerate time-to-market for your IEEE802.16e mobile station designs
The E6651A represents a significant breakthrough in Mobile WiMAX testing. It incorporates flexible
base station emulation and RF parametric tests into one integrated unit and extends Agilent’s
unmatched portfolio of WiMAX™ test solutions for development, verification, and manufacturing
customers.
The E6651A Mobile WiMAX Test Set allows 802.16e-2005 mobile station designers and
manufacturers to move rapidly from development to volume production, and to improve the integrity
and quality of products while reducing cost.
The Agilent E6651A includes a suite of RF measurements that may be used for characterization,
calibration, and verification purposes. The test set provides flexible profile support, with RF signal
generation and signal analysis capability up to 6 GHz.
To enable mobile stations to be tested to the latest WiMAX standards, MIMO options for Wave 2
testing are available. Capabilities include an additional downlink channel for Mobile Station testing
and support for the following IO-MIMO modes:
• Downlink Space-Time Coding (STC) (Matrix A)
• Downlink Spatial Multiplexing (MIMO) (Matrix B)
• Uplink Collaborative Spatial Multiplexing
With realistic base station emulation, the Mobile WiMAX test set offers a controlled environment in
which to verify network entry, traffic connection and functional performance. It provides flexibility to
configure a range of network parameters so you can test, stress, and debug the protocol and data
handling capabilities of your design. Software tools are available to enable protocol and application
testing.
With this exciting product, Agilent helps you get your design to market faster and more efficiently,
and continues to provide comprehensive tools for all stages of your product lifecycle. So, as you
move WiMAX forward, Agilent clears the way.
1 page  
Signal generator specifications
(continued)
Performance
Phase noise at 3 GHz
Residual (EVM)2
ACLR3
Harmonics
Sub-harmonics
Non-harmonic spurious4
Downlink analog IQ interface1
Connector type
Analog IQ outputs
I/Q bandwidth
Output impedance
Maximum output voltage level
Analog IQ inputs
I/Q bandwidth
Input impedance
Maximum input voltage level
-102 dBc/Hz @ 10 kHz offset
≤ 3%
≤ -50 dBc at adjacent channel
≤ -30 dBc (1 GHz CW, -7 dBm)
≤ -30 dBc (2.7 GHz CW, -7 dBm)
≤ -30 dBc (5.99 GHz CW, -12 dBm)
≤ -60 dBc, offsets > 10 kHz (< 3 GHz)
≤ -65 dBc, offsets > 10 kHz (≥ 3 GHz for RF2
output5)
≤ -70 dBc, offsets > 10 kHz (≥ 3 GHz, for RF1
output)
BNC
Connectors DL1-lout, DL1-Qout, DL2-lout, DL2-
Qout
Determined by profile used
50 Ω
340 mVrms; 1 V pk-pk
Connectors DL1-lret, DL1-Qret, DL2-lret, DL2-Qret
>25 MHz
50 Ω
+/-500 mVrms complex signal on I or Q
+/- 0.5 Vdc on I or Q
Uplink analog IQ/IF interface1
Connector type
Input impedance
Maximum input voltage level
Standard IF frequency for 802.16e WiMAX
BNC
Connectors UL-lF1/I, UL-lF2/Q
50 Ω
1 V pk-pk
78 MHz for 5MHz and 10MHz BW profiles
72 MHz for 7MHz BW profiles
70 MHz for 8.75MHz BW profiles
Maximum data throughput
www.DataSheet4U.com
End-to-end IP connection6
E6651A test mode
11.6 Mbps DL; 3 Mbps UL (UDP; hardware
revision A.2.x)
10.8 Mbps DL; 2.9 Mbps UL (UDP; hardware
revision A.1.x)
13 Mbps DL (UDP); 2.9 Mbps UL (PING) (hardware
revision A.2.x)
11.5 Mbps DL (UDP); 2.9 Mbps UL (PING)
(hardware revision A.1.x)
1 Downlink IQ and Uplink IF interface available as
standard on units with serial numbers MY4815xxxx and
MY4832xxxx. Downlink IQ and Uplink IQ/IF interface
available as standard on units with serial numbers
MY4914xxxx and later
2 Error Vector Magnitude measured at output frequency 2345 MHz
3 Output power -22 dBm at 2345 MHz. Measured at 5 MHz, 8.75 MHz, and 10 MHz BW channels
4 CW measurement, output -7 dBm, 2350 MHz
5 Second RF output (RF2) available on instruments with MIMO options E6651A-3M1, E6651A-6M1
6 Using E6655A WiMAX lab application
5
5 Page | ||
| Páginas | Total 8 Páginas | |
| PDF Descargar | [ Datasheet E6651A.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| E6651A | Mobile WiMAX test set | Agilent(Hewlett-Packard) |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |