|
|
PDF AOZ8011 Data sheet ( Hoja de datos )
| Número de pieza | AOZ8011 | |
| Descripción | 8-Line EMI Filter | |
| Fabricantes | Alpha & Omega Semiconductors | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de AOZ8011 (archivo pdf) en la parte inferior de esta página. Total 7 Páginas | ||
|
No Preview Available !
AOZ8011
8-Line EMI Filter with Integrated ESD Protection
General Description
The AOZ8011 is an 8-line device integrating EMI filtering
with ESD protection for each line. It is designed to
suppress unwanted EMI/RFI signals and provide electro-
static discharge (ESD) protection in portable electronic
equipment. This state-of-the-art device utilizes AOS
leading edge Trench Vertical Structure [TVS]2 ™
technology for superior clamping performance and filter
attenuation over the full operating display range. The
AOZ8011 has been optimized for protection of color LCD
displays and CCD camera lines in cellular phones and
other portable consumer electronic devices.
The AOZ8011 consists of eight identical circuits
comprised of TVS diodes for ESD protection, and a
resistor–capacitor network for EMI/RFI filtering.
A series resistor value of 100Ω and a capacitance
value of 17pF are used to achieve -25dB minimum
attenuation from 800MHz to 3.0GHz. The TVS diodes
provide effective suppression of ESD voltages in excess
of ±17kV (air discharge) and ±17kV (contact discharge).
This exceeds IEC 61000-4-2, level 4 ESD immunity test.
The AOZ8011 comes in an RoHS compliant, 1.6mm x
4.0mm DFN package and is rated over a -40°C to +85°C
ambient temperature range.
Features
● 8 lines for EMI filtering and ESD protection:
– Exceeds IEC 61000-4-2, level 4 (ESD) immunity test
– ±17kV (air discharge) and ±17kV (contact discharge)
● Trench Vertical Structure [TVS]2 ™ based technology
used to achieve excellent ESD clamping & filter
performance over the full operating display range
● Filter performance: -25db attenuation from 800MHz to
3.0GHz
● Low operating voltage: 5.0V
● Capacitance stability over wide range of voltages and
temperatures
● DFN package 1.6 x 4.0 mm
● Pb-Free device
Applications
● EMI filtering and ESD protection for data lines
● LCD displays, camera interface, I/O interface
● Portable handheld devices, cell phones, PDA phones
Electrical Schematic (each channel)
CHn
(n = 1–8)
100Ω
17pF
17pF
www.DataSheet4U.com
GND
Figure 1.
Rev. 1.4 April 2008
www.aosmd.com
Page 1 of 7
1 page  
AOZ8011
Package Dimensions, DFN 1.6 x 4.0, 16L
B
16
D
A bbb C A B b
e
16
E E1
aaa C 2x
1
aaa C 2x
TOP VIEW
D1
BOTTOM VIEW
R
L
1
A
ccc C
c
ddd C
SIDE VIEW
RECOMMENDED LAND PATTERN
3.20
0.30
0.25
0.50
0.45 1.30
UNIT: mm
A1 Seating B
Plane
Dimensions in millimeters
Symbols
A
A1
b
c
D
D1
E
E1
e
L
R
aaa
bbb
ccc
ddd
Min. Nom. Max.
0.70 0.75 0.80
0.00 0.02 0.05
0.18 0.25 0.30
0.15 0.20 0.25
4.00 BSC
3.05 3.20 3.30
1.60 BSC
0.30 0.45 0.55
0.50 BSC
0.20 0.30 0.40
0.10
0.15
0.10
0.10
0.08
Dimensions in millimeters
Symbols
A
A1
b
c
D
D1
E
E1
e
L
R
aaa
bbb
ccc
ddd
Min. Nom. Max.
0.028 0.030 0.031
0.000 0.001 0.002
0.007 0.010 0.012
0.006 0.008 0.010
0.157 BSC
0.120 0.126 0.130
0.063 BSC
0.012 0.018 0.022
0.020 BSC
0.008 0.012 0.016
0.004
0.006
0.004
0.004
0.003
Notes:
1. Dimensions and tolerancing conform to ASME Y14.5M-1994.
2. All dimensions are in millimeters.
3. Dimension b applies to metallized terminal and is measured between 0.10mm and 0.30mm from the terminal tip. If the terminal has the
optional radius on the other end of the terminal, the dimension b should not be measured in that radius area.
4. Coplanarity ddd applies to the terminals and all other bottom surface metallization.
www.DataSheet4U.com
Rev. 1.4 April 2008
www.aosmd.com
Page 5 of 7
5 Page | ||
| Páginas | Total 7 Páginas | |
| PDF Descargar | [ Datasheet AOZ8011.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| AOZ8011 | 8-Line EMI Filter | Alpha & Omega Semiconductors |
| AOZ8013 | 4-Line EMI Filter | Alpha & Omega Semiconductors |
| AOZ8014 | 4-Line EMI Filter | Alpha & Omega Semiconductors |
| AOZ8015 | 6-Line EMI Filter | Alpha & Omega Semiconductors |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |