Datasheet.kr   

SPI4018 데이터시트 PDF




Superworld Electronics에서 제조한 전자 부품 SPI4018은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 SPI4018 자료 제공

부품번호 SPI4018 기능
기능 SMD POWER INDUCTORS
제조업체 Superworld Electronics
로고 Superworld Electronics 로고


SPI4018 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.



전체 5 페이지수

미리보기를 사용할 수 없습니다

SPI4018 데이터시트, 핀배열, 회로
SMD POWER INDUCTORS
SPI4018 SERIES
1. PART NO. EXPRESSION :
SPI4018-1R2NZF
(a) (b)
(c) (d)(e)(f)
(a) Series code
(b) Dimension code
(c) Inductance code : 1R2 = 1.2uH
(d) Tolerance code : M = ±20%, N = ±30%
(e) Z : Standard part
(f) F : RoHS Compliant
2. CONFIGURATION & DIMENSIONS :
A EDE
G
Marking
4.2
4.4
OR
2.0
1.0
Recommended PCB Pattern
Unit:m/m
ABCDEF G
4.0±0.2 4.0±0.3 1.8 Max. 2.1 Typ 0.96 Typ 1.6 Typ 1.1 Typ
3. MATERIALS :
(a) Core : Ferrite
(b) Wire : Polyurethane Enamelled Copper Wire
(c) Terminal Clip : C5191
(d) Adhesive : Epoxy
(e) Ink : 70000-00101
www.DataSheet4U.net
NOTE : Specifications subject to change without notice. Please check our website for latest information.
SUPERWORLD ELECTRONICS
(S)
PTE
28.12.2009
LTD
PG. 1




SPI4018 pdf, 반도체, 판매, 대치품
SMD POWER INDUCTORS
SPI4018 SERIES
6. RELIABILITY & TEST CONDITION :
ITEM
Electrical Characteristics Test
Dielectric withstand voltage
PERFORMANCE
There shall be no damage or problems.
Temperature characteristics
ǻL/L20°C<±10%
0~2000 ppm/°C
High temperature storage
ǻL/Lo<±10%
There shall be no mechanical damage.
TEST CONDITION
AC 100V voltage shall be applied for 1 minute across the
top surface and the terminal of this sample
The test shall be performed after the sample has stabilized
in an ambient temperature of -20 to +85°C,and the value
calculated based on the value applicable in a normal
temperature and normal humidity shall be ǻL/L20°C<±10%.
The sample shall be left for 96±4 hours in an atmosphere
with a temperature of 85±2°C and a normal humidity.
Upon completion of the measurement shall be made after
the sample has been left in a normal temperature and
normal humidity for 1 hour.
Low temperature storage
Change of temperature
www.DataSheet4U.net
Moisture storage
ǻL/Lo<±10%
There shall be no mechanical damage.
The sample shall be left for 96±4 hours in an atmosphere
with a temperature of -25±3°C.
Upon completion of the test, the measurement shall be
made after the sample has been left in a normal temperature
and normal humidity for 1 hour.
ǻL/Lo<±10%
There shall be no other damage of problems
The sample shall be subject to 5 continuous cycles, such as
shown in the table 2 below and then it shall be subjected to
standard atmospheric conditions for 1 hour, after which
measurement shall be made.
Temperature
Duration
-25±3°C
1 (Thermostat No.1) 30 min.
Standard
5 sec. or less
2 atmospheric No.1ĺNo.2
85±2°C
3 (Thermostat No.2) 30 min.
4
Standard
atmospheric
5 sec. or less
No.2ĺNo.1
ǻL/Lo<±10%
There shall be no mechanical damage.
The sample shall be left for 96±4 hours in a temperature of
40±2°C and a humidity(RH) of 90~95%.
Upon completion of the test, the measurement shall be
made after the sample has been left in a normal temperature
and normal humidity more than 1 hour.
NOTE : Specifications subject to change without notice. Please check our website for latest information.
SUPERWORLD ELECTRONICS
(S)
PTE
28.12.2009
LTD
PG. 4

4페이지












구       성 총 5 페이지수
다운로드[ SPI4018.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
SPI4012

SMD POWER INDUCTORS

Superworld Electronics
Superworld Electronics
SPI4015

SMD POWER INDUCTORS

Superworld Electronics
Superworld Electronics

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵