Datasheet.kr   

ML2032 데이터시트 PDF




Maxell에서 제조한 전자 부품 ML2032은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


 

PDF 형식의 ML2032 자료 제공

부품번호 ML2032 기능
기능 Lithium Manganese Dioxide Rechargeable Batteries
제조업체 Maxell
로고 Maxell 로고


ML2032 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.




전체 4 페이지수

미리보기를 사용할 수 없습니다

ML2032 데이터시트, 핀배열, 회로
Data Sheet
ML2016Lithium Manganese Dioxide Rechargeable Batteries
1/2
Model
System
Nominal Voltage (V)
Nominal Capacity (mAh)*
Nominal Discharge Current (ȐA)
Charge/Discharge Cycle Lifetime
Depth of Discharge = 10%
Depth of Discharge = 20%
Temperature Ranges (deg. C)
Operating
Weight (g)**
Dimensions (mm)**
Diameter
Height
UL Recognition
ML2016
(Li-Al) alloy-Manganese Dioxide/Organic Electrolyte
3
25
200
1,500 (2.5 mAh discharge) (total capacity 3,750 mAh)
500 (5 mAh discharge) (total capacity 2,500 mAh)
min.
max.
–20 +60
1.8
20
1.6
MH12568 (N)
ø20.0
ø15.8
(–)
(+)
Available Terminals and Wire Connectors
Check http://www.maxell.co.jp/e/products/industrial/battery/pdf/ml2016e_.pdf for diagrams of
batteries with terminals.
Characteristics
G Charge Property
100
80
Recommended area
60
40
Prohibited
20 area
FV = 2.0V
0
2.5 2.6 2.7 2.8 2.9 3.0 3.1 3.2 3.3 3.4 3.5
Charge voltage (V)
G Discharge Characteristics
Temperature: 20 deg. C
3.5
3.0
240k
2.5 100k
2.0 15k
30k
1.5
1.0
0
5 10 15 20 25 30
Discharge capacity (mAh)
G Temperature Characteristics
Discharge load: 15k
3.5
3.0 20 deg. C
2.5 60 deg. C
2.0
1.5
1.0
0
–20 deg. C 0 deg. C
20 40 60 80 100 120 140 160 180
Discharge duration time (h)
G Relationship between Discharge Current and Duration Time
Discharge final voltage: 2V Temperature: 20 deg. C
104
103
102
101
100
100
101
Discharge current (µA)
102
www.DataSheet4U.com




ML2032 pdf, 반도체, 판매, 대치품
Warnings
ML Lithium Manganese Dioxide Rechargeable Batteries
2/2
• Recommended circuits
Please refer to the representative basic circuits shown below. If you have any questions about circuit design, please feel free to cantact Maxell.
+
Voltage
Regulator
D
To 16V
GND R
(3.0-3.3V)
ML
Load
Table 2 Example of resistance
Model
Output Voltage of Voltage Regulator
3.1V
3.2V
ML2032
> 550 ohm
> 600 ohm
ML2016
> 550 ohm
> 600 ohm
ML1220
> 1.1K ohm
> 1.2K ohm
D: Diode; R: Resistance
• How to select the protective resistance for the current control
The maximum charge current flows in the battery when charged at an end voltage of 2V. Therefore, the value of resistance is calculated using this
equation:
(R) >= ((Output Voltage of Voltage Regulator) - 2) / (Nominal Charge Current)
For example, the S-812C series, which has a maximum input voltage of 18V, or the S-817 series with a maximum input voltage of 10V (Seiko Instruments
Inc.) can be used as a voltage regulator.
Note 1: If the main power source voltage is stable, the charge voltage can be allotted from main power source divided by the combination of resistances.
Note 2: Because the battery height must be changed by the charge and discharge cycle, place a minimum of 1mm of space between the battery and
device or chassis.
Disposal
The battery may be regulated by national or local regulation. Please follow the
instructions of proper regulation. As electric capacity is left in a discarded
battery and it comes into contact with other metals, it could lead to distortion,
leakage, overheating, or explosion, so make sure to cover the (+) and (-)
terminals with friction tape or some other insulator before disposal.
Tape
+
Battery
Example of vattery insulation
Handling/Storage
• Use within the rated temperature range of - 20 to + 60 deg C.
Otherwise, the battery's charge and discharge characteristics may be reduced.
• Never expose the battery to ultrasonic sound.
Exposing the battery to ultrasonic sound may cause short-circuiting because the inside material is broken into pieces, leading to distortion, leakage,
overheating, explosion, or fire.
• Never subject the battery to severe shock.
Dropping, throwing, or stomping on the battery may cause distortion, leakage, overheating, explosion, or fire.
• Never use or leave the battery in a hot place such as under the direct rays of the sun or in a car in hot weather.
If you do, this may cause distortion, leakage, overheating, explosion, or fire.
• Never allow the battery to come in contact with water.
If it does, this may cause the battery to rust or lead to distortion, leakage, overheating, explosion, or fire.
• Never store the battery in a hot and highly humid environment.
Doing so may cause the performance of the battery to deteriorate. In certain environments, this may lead to distortion, leakage, overheating, explosion, or
fire.
* Nominal capacity indicates duration until the voltage drops down to 2.0V when discharged at a nominal discharge current at 20 deg. C.
** Dimensions and weight are for the battery itself, but may vary depending on the shape of terminals or other factors.
Hitachi Maxell, Ltd.
2-8-12, Iidabashi, Chiyoda-ku, Tokyo 102-8521, Japan
http://www.maxell.com
• Data and dimensions are just reference values. For further details,
please contact us at your nearest Maxell office.
• Contents on this website are subject to change without notice.
Date of issue: Aug, 2003

4페이지












구       성 총 4 페이지수
다운로드[ ML2032.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
ML2031

TONE DETECTOR

Micro Linear
Micro Linear
ML2031CP

TONE DETECTOR

Micro Linear
Micro Linear

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵