|
|
Número de pieza | NUP4114HMR6 | |
Descripción | TVS Diode ( Rectifier ) | |
Fabricantes | ON Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de NUP4114HMR6 (archivo pdf) en la parte inferior de esta página. Total 9 Páginas | ||
No Preview Available ! NUP4114HMR6
Transient Voltage
Suppressors
Low Capacitance ESD Protection for
High Speed Data Lines
The NUP4114HMR6 transient voltage suppressor is designed to
protect high speed data lines from ESD. Ultra−low capacitance and
high level of ESD protection makes this device well suited for use in
HDMI and DVI applications.
Features
• Low Capacitance (0.8 pF Typical Between I/O Lines)
• Low Clamping Voltage
• Low Leakage
• Stand Off Voltage: 5 V
• Protection for the Following IEC Standards:
IEC 61000−4−2 Level 4 ESD Protection
• UL Flammability Rating of 94 V−0
• This is a Pb−Free Device
Typical Applications
• High Speed Communication Line Protection
• Digital Video Interface (DVI) and HDMI
• Monitors and Flat Panel Displays
• Gigabit Ethernet
• Notebook Computers
• USB 2.0 High Speed Data Line and Power Line Protection
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted)
Rating
Symbol
Value
Unit
Operating Junction Temperature Range TJ −40 to +125 °C
Storage Temperature Range
Tstg − 55 to +150 °C
Lead Solder Temperature −
Maximum (10 Seconds)
TL 260 °C
Human Body Model (HBM)
Machine Model (MM)
IEC 61000−4−2 Contact (ESD)
ESD
16000
400
13000
V
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
See Application Note AND8308/D for further description of
survivability specs.
http://onsemi.com
MARKING
DIAGRAM
6
1
TSOP−6
CASE 318G
STYLE 12
P4H MG
G
1
P4H = Specific Device Code
M = Date Code
G = Pb−Free Package
(Note: Microdot may be in either location)
PIN CONFIGURATION
AND SCHEMATIC
I/O 1
VN 2
I/O 3
6 I/O
5 VP
4 I/O
ORDERING INFORMATION
Device
Package
Shipping
NUP4114HMR6T1G TSOP−6 3000/Tape & Reel
(Pb−Free)
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2010
www.DatJaaShneueatr4yU, .2n0e1t0 − Rev. 3
1
Publication Order Number:
NUP4114HMR6/D
1 page NUP4114HMR6
APPLICATIONS INFORMATION
The new NUP4114HMR6 is a low capacitance TVS diode
array designed to protect sensitive electronics such as
communications systems, computers, and computer
peripherals against damage due to ESD events or transient
overvoltage conditions. Because of its low capacitance, it
can be used in high speed I/O data lines. The integrated
design of the NUP4114HMR6 offers low capacitance
steering diodes and a TVS diode integrated in a single
package (TSOP−6). If a transient condition occurs, the
steering diodes will drive the transient to the positive rail of
the power supply or to ground. The TVS device protects the
power line against overvoltage conditions to avoid damage
to the power supply and any downstream components.
NUP4114HMR6 Configuration Options
The NUP4114HMR6 is able to protect up to four data
lines against transient overvoltage conditions by driving
them to a fixed reference point for clamping purposes. The
steering diodes will be forward biased whenever the voltage
on the protected line exceeds the reference voltage (Vf or
VCC + Vf). The diodes will force the transient current to
bypass the sensitive circuit.
Data lines are connected at pins 1, 3, 4 and 6. The negative
reference is connected at pin 2. This pin must be connected
directly to ground by using a ground plane to minimize the
PCB’s ground inductance. It is very important to reduce the
PCB trace lengths as much as possible to minimize parasitic
inductances.
Option 2
Protection of four data lines with bias and power supply
isolation resistor.
I/O 1
I/O 2
1
2
VCC
6
10 k
5
34
I/O 3
I/O 4
The NUP4114HMR6 can be isolated from the power
supply by connecting a series resistor between pin 5 and
VCC. A 10 kW resistor is recommended for this application.
This will maintain a bias on the internal TVS and steering
diodes, reducing their capacitance.
Option 3
Protection of four data lines using the internal TVS diode
as reference.
I/O 1
I/O 2
Option 1
Protection of four data lines and the power supply using
VCC as reference.
16
2 5 NC
I/O 1
I/O 2
I/O 3
I/O 4
1
2
3
6
5 VCC
4
For this configuration, connect pin 5 directly to the
positive supply rail (VCC), the data lines are referenced to
the supply voltage. The internal TVS diode prevents
overvoltage on the supply rail. Biasing of the steering diodes
reduces their capacitance.
I/O 3
I/O 4
3
4
In applications lacking a positive supply reference or
those cases in which a fully isolated power supply is
required, the internal TVS can be used as the reference. For
these applications, pin 5 is not connected. In this
configuration, the steering diodes will conduct whenever the
voltage on the protected line exceeds the working voltage of
the TVS plus one diode drop (VC = Vf + VTVS).
ESD Protection of Power Supply Lines
When using diodes for data line protection, referencing to
a supply rail provides advantages. Biasing the diodes
reduces their capacitance and minimizes signal distortion.
http://onsemi.com
5
5 Page |
Páginas | Total 9 Páginas | |
PDF Descargar | [ Datasheet NUP4114HMR6.PDF ] |
Número de pieza | Descripción | Fabricantes |
NUP4114HMR6 | TVS Diode ( Rectifier ) | ON Semiconductor |
NUP4114HMR6T1G | TVS Diode ( Rectifier ) | ON Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |