|
|
|
부품번호 | TH308 기능 |
|
|
기능 | Rain Sensor | ||
제조업체 | TecHome | ||
로고 | |||
전체 1 페이지수
www.DataSheet4U.net
TecHome
Home Automation Made Easy
TH308
KiT
TH308 Rain Sensor
The TH308 has been designed to close opening/closing roofs and windows when it rains.
Surface mount technology has been incorporated into a micro-controller specifically designed
for Australian conditions. The sensor is equipped with a circuit that heats the surface a few
degrees above ambient temperature enabling accurate detection in dew or foggy conditions.
This feature also allows the surface to dry after it has stopped raining allowing for fast switch-
ing to a non-percipitation state.
TH308 Features
Water resistant enclosure with IP65 rating
Automatic calibration during assembly
Internally heated to eliminate moisture
Optional normally closed outputs
Accurate sensitivity
12 month Warranty
4 mm
72.5 mm
112 mm
TH308 Technical Specifications
Sensor: Capacitive sensor with internal heating
Material: UV Stablised polycarbonate
Dimensions: 72.5mm x 112mm x 15mm
Weight: 350 gms
Supply Voltage: 12VDC / 500mA Max (less than 60mA used by the sensor)
Operating Range: On/Off (precipitation/no precipitation)
Output Signal: Open Collector (High= no precipitation, Low=precipitation)
Operating Temperature: 0 - 50 deg C
TecHome
[email protected] www.techome.com.au T: (07) 3847 1400 F: (07) 3847 1337
TH308
| |||
구 성 | 총 1 페이지수 | ||
다운로드 | [ TH308.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
TH3044 | K-Bus Interface | Melexis |
TH308 | Triode | ETC |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |