|
|
Número de pieza | A025DN01_V0 | |
Descripción | LCD MODULE | |
Fabricantes | AUO | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de A025DN01_V0 (archivo pdf) en la parte inferior de esta página. Total 61 Páginas | ||
No Preview Available ! www.DataSheet4U.net
A025DN01 V0 Product Spec
Version
Page
1.4
1/61
Doc. version: 1.4
Total pages: 61
Date:
2007/08/09
Product Specification
2.5ϛ COLOR TFT-LCD MODULE
MODEL NAME: A025DN0 1 V0
<ʳ Ϭʳ > Preliminary Specification
< > Final Specification
Note: The content of this
specification is subject to
change without prior notice.
© 2007 AU Optronics
All Rights Reserved,
Do Not Copy.
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PRPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS W ITHOUT PERMISSION FROM AU OPTRONICS CORP.
1 page www.DataSheet4U.net
A025DN01 V0 Product Spec
Version
1.4
Page
5/61
G. Application note ................................................................................ ᙑ ᎄ ! ࡸ آ ࡳ ᆠ ᧘ Ζ
1. Application circuit .................................................................................................... ᙑᎄ! ࡸ آ ࡳ ᆠ ᧘ Ζ
1.1 With internal LED driver circuit ....................................................................... ᙑᎄ! ࡸ آ ࡳ ᆠ ᧘ Ζ
1.2 With external LED driver circuit ...................................................................... ᙑᎄ! ࡸ آ ࡳ ᆠ ᧘ Ζ
2. Power on/off sequence ..........................................................................................................................52
2.1 Power on (Standby Disabling) .......................................................................................................52
3.2 Power off (Standby Enabling) ........................................................................................................53
3. Recommended power on/off serial command settings............................................................................54
3.1 UPS051 ........................................................................................................................................55
3.2 UPS052 320 mode........................................................................................................................56
3.3 UPS052 360 mode........................................................................................................................57
3.4 CCIR656.......................................................................................................................................58
3.5 YUV 720 .......................................................................................................................................59
3.6 YUV 640 .......................................................................................................................................60
4. Power generation circuit.........................................................................................................................61
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PRPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS W ITHOUT PERMISSION FROM AU OPTRONICS CORP.
5 Page www.DataSheet4U.net
A025DN01 V0 Product Spec
Version
1.4
Page
11/61
3. Electrical characteristics
3.1 Recommended operating conditions (GND=AGND=0V)
Item
Symbol
Min.
Typ.
Max.
Unit
Remark
VDD
3.0
3.3
3.6 V
Power supply
VDDIO
2.5
3.3
3.6 V
Note 1
Note 2
Input
Signal
Note 1:
H Level
VIH 0.7* VDDIO
-
VDDIO
V
L Level
VIL
GND
- 0.3* VDDIO V
A build-in power on reset circuit for VDD and VDDIO is provided within the integrated LCD
driver IC. The LCD module is in power save mode in default, and a standby releasing is
required after VDDIO power on through serial control. Please refer to the register STB setting
for detail.
Note 2: The power supply of digital interface, VDDIO, is for the 1.8V digital interface requirement in the
future. These digital signals are DCLK, HSYNC, VSYNC, D7~D0, CS, SDA and SCL. If the
digital interface level is 3.3V, please short the power pin VDD and VDDIO to 3.3V. In other
words, no matter the voltage level of VDDIO is 1.8V or 3.3V, the voltage level of VDD needs to
be kept 3.3V.
3.2 Electrical characteristics (GND=AGND=0V)
Parameter
Symbol
Condition
Input Current
for VDD
IDD
IDD(STANDBY)
VDD=3.3V
Input Current
for VDDIO
IDDIO
IDDIO(STANDBY)
VDDIO=3.3V
DC-DC voltage
VGH
VGL
VDD=3.3V
VDD=3.3V
VCOM voltage
VCAC
VCDC
-
-
Min.
14.5
-10.5
3.6
Typ.
8.2
0.08
200
50
15
-10
4.2
Max.
10
0.15
15.5
-9.5
4.8
Unit
mA
uA
V
V
Vp-p
Remark
Note 1
Note 1
Note 1
Note 1
Note 2
Note 2
AC component, Note 3
-0.3 -0.15 0
V DC component, Note 4
Note 1: Test Condition: 8colorbar+Grayscale pattern, UPS051 mode, DCLK=27MHz, Frame rate: 60Hz,
other registers are default setting.
Note 2: VGH and VGL are output voltages of integrated LCD driver IC.
Note 3: The brightness of LCD panel could be adjusted by the adjustment of the AC component of VCOM.
Note 4: VCDC could be adjusted, so as to minimize flicker and maximum contrast on each module.
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PRPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS W ITHOUT PERMISSION FROM AU OPTRONICS CORP.
11 Page |
Páginas | Total 61 Páginas | |
PDF Descargar | [ Datasheet A025DN01_V0.PDF ] |
Número de pieza | Descripción | Fabricantes |
A025DN01-V9 | Display Module | AUO |
A025DN01_V0 | LCD MODULE | AUO |
A025DN01_V3 | LCD MODULE | AUO |
A025DN01_V7 | LCD MODULE | AUO |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |