|
|
PDF A070FW03_V4 Data sheet ( Hoja de datos )
| Número de pieza | A070FW03_V4 | |
| Descripción | LCD Module | |
| Fabricantes | AUO | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de A070FW03_V4 (archivo pdf) en la parte inferior de esta página. Total 22 Páginas | ||
|
No Preview Available !
www.DataSheet4U.net
Ve r s i o n
Tota l pages
Date
3
20
2006.08.30
Product Specification
7〞 color TFT-LCD module
MODEL NAME: A07 0FW 0 3 V4
( ◆ ) Preliminary Specification
( ….. ) Final Specification
Note: The content of this
specification is subject to
change.
© 2006 AU Optronics
All Rights Reserved,
Do Not Copy.
1 page  
www.DataSheet4U.net
A. Physical specifications
NO. Item
1 Display resolution(dot)
2 Active area(mm)
3 Screen size(inch)
4 Dot pitch(mm)
5 Color configuration
6 Overall dimension(mm)
7 Weight(g)
8 Surface treatment
9 Backlight unit
Note 1: Refer to Fig. 1
Model
Version
Page
: A070FW03 V4
:3
: 3 /20
Specification
1440(W)×234(H)
154.08(W)×86.58(H)
7.0(Diagonal)
0.107(W)×0.370(H)
R. G. B. stripe
164.9(W)×100.0(H)×5.7(D)
160 ±10
AG(25%) with WV film
CCFL
Remark
Note 1
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED,
OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM AU OPTRONICS CORP.
5 Page 
www.DataSheet4U.net
C. Optical specification (Note 1, Note 2)
Item
Symbol Condition
Response time
Rise
Fall
Tr
Tf
θ=0°
Contrast ratio
CR At optimized
Viewing angle
Viewing angle
Top
Bottom
Left
Right
CR≧10
Brightness
White chromaticity
YL IL=6mA, 25℃
X θ=0°
Y θ=0°
Min.
-
-
200
30
50
50
50
350
0.26
0.28
Model
Version
Page
Typ.
12
18
300
Max.
24
36
-
40
65
65
65
400
0.31
0.33
-
-
-
-
-
0.36
0.38
: A070FW03 V4
:3
: 9 /20
Unit
ms
ms
Remark
Note 3,5
Note 4, 5
deg.
Note 5, 6
cd/m2
Note 7
Note 7
Note 1 : Ambient temperature =25℃, and lamp current IL = 6 mArms. To be measured in the dark room.
DC/AC inverter driving frequency: 70 kHz.
Note 2 :To be measured on the center area of panel with a viewing cone of 1°by Topcon luminance meter
BM-5, after 15 minutes operation.
Note 3. Definition of response time:
The output signals of photo detector are measured when the input signals are changed from
“black” to “white”(falling time) and from “white” to “black”(rising time), respectively.
The response time is defined as the time interval between the 10% and 90% of amplitudes.
Refer to figure as below.
"White"
100%
90%
"Black"
"White"
10%
0% Tr
Tf
Note 4. Definition of contrast ratio:
Contrast ratio is calculated with the following formula.
Photo detector output when LCD is at “White” state
Contrast ratio (CR)= Photo detector output when LCD is at “Black” state
Note 5. White Vi=Vi50 ＋ 1.5V
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED,
OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM AU OPTRONICS CORP.
11 Page | ||
| Páginas | Total 22 Páginas | |
| PDF Descargar | [ Datasheet A070FW03_V4.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| A070FW03-V1 | TFT LCD Module | AUO |
| A070FW03-V3 | TFT LCD Module | AUO |
| A070FW03-V4 | TFT LCD Module | AUO |
| A070FW03-V6 | TFT LCD Module | AUO |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |