Datasheet.kr   

TCTO 데이터시트 PDF




ROHM Semiconductor에서 제조한 전자 부품 TCTO은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 TCTO 자료 제공

부품번호 TCTO 기능
기능 Conductive polymer chip tantalum capacitors
제조업체 ROHM Semiconductor
로고 ROHM Semiconductor 로고


TCTO 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.




전체 6 페이지수

미리보기를 사용할 수 없습니다

TCTO 데이터시트, 핀배열, 회로
Conductive polymer chip tantalum capacitors
(Bottom surface electrode type : Large capacitance)
TCTO Series AL Case
Features (AL)
1) Conductive polymer used for the cathode material.
2) Ultra low ESR
3) Small package, but big capacitance
4) Screening by thermal shock
Dimensions (Unit : mm)
Anode mark
H
L
W1
W2
SS
Dimensions
L
W1
W2
H
S
(Unit : mm)
AL case
3.2 +− 0.2
1.6 +− 0.2
1.2 +− 0.2
1.1 +− 0.1
0.8 +− 0.2
Part No. Explanation
TCTO AL 0 J 4 7 6 M 8R
12
1 Series name
TCTO
2 Case style
AL
3 Rated voltage
Rated voltage (V) 2.5 4 6.3 10
CODE
0E 0G 0J 1A
3
4
www.DataSheet.co.kr
56
4 Nominal capacitance
Nominal capacitance in pF in 3 digits:
2 significant figures followed by the figure
representing the number of 0's.
5 Capacitance tolerance
M : +− 20%
6 Taping
8 : Tape width
R : Positive electrode on the side opposite to sprocket hole
This specification has possibility of charge, due to underdevelopment product.
Please ask for latest specification to our sales.
www.rohm.com
c 2012 ROHM Co., Ltd. All rights reserved.
1/5
2012.03 - Rev.E
Datasheet pdf - http://www.DataSheet4U.net/




TCTO pdf, 반도체, 판매, 대치품
TCTO Series AL Case
Data Sheet
Item
Temperature
Stability
Temp.
ΔC / C
Performance
55°C
Within 0/20% of initial value
Test conditions (based on JIS C 51011 and JIS C 51013)
As per 4.29 JIS C 5101-1
As per 4.13 JIS C 5101-3
Df (tan δ)
Shall be satisfied the voltage on " Standard list "
L.C.
Temp.
ΔC / C
Df (tan δ)
+105°C
Within +50/0% of initial value
Shall be satisfied the voltage on " Standard list "
L.C. Less than 1,000% of initial value
Surge voltage Appearance There should be no significant abnormality.
L.C. Less than 200% of initial value
ΔC / C
Df (tan δ)
Within ±20% of initial value
Less than 200% of initial limit
Loading at
Appearance There should be no significant abnormality.
High temperature
L.C. Less than 400% of initial limit
ΔC / C
Within ±20% of initial value
Df (tan δ) Less than 300% of initial limit
As per 4.26JIS C 5101-1
As per 4.14JIS C 5101-3
Apply the specified surge voltage every 5±0.5 min.
for 30±5 s. each time in the atmospheric condition of 85±2°C.
Repeat this procedure 1,000 times.
After the specimens, leave it at room temperature for
over 24h and then measure the sample.
As per 4.23 JIS C 5101-1
As per 4.15 JIS C 5101-3
After applying the rated voltage for 1000+72/0 h without
discontinuation via the serial resistance of 3Ω or less
at a temperature of 85±2°C, leave the sample at room
temperature / humidity for 24h and measure the value.
Terminal
strength
Capacitance The measured value should be stable.
Appearance There should be no significant abnormality.
As per 4.35 JIS C 5101-1
As per 4.9 JIS C 5101-3
A force is applied to the terminal until it bends to 1mm and
by a prescribed tool maintain the condition for 5s.
(See the figure below)
20
50
(Unit : mm)
F (Apply force)
R230
thickness=1.6mm
1
Adhesiveness
The terminal should not come off.
www.DataSheet.co.kr
45 45
As per 4.34 JIS C 5101-1
As per 4.8 JIS C 5101-3
Apply force of 5N in the two directions shown in the figure
below for 10±1s after mounting the terminal on a circuit board.
product
Apply force
Dimensions
Refer to "External dimensions"
a circuit board
Measure using a caliper of JIS B 7507 Class 2
or higher grade.
Resistance to solvents The indication should be clear
As per 4.32 JIS C 5101-1
As per 4.18 JIS C 5101-3
Dip in the isopropyl alcohol for 30±5s, at room
temperature.
Solderability
3/4 or more surface area of the solder coated
terminal dipped in the soldering bath should
be covered with the new solder.
As per 4.15.2 JIS C 5101-1
As per 4.7 JIS C 5101-3
Dip speed=25±2.5mm / s
Pre-treatment (accelerated aging): Leave
the sample on the boiling distilled water for 1 h.
Solder temp. : 245±5°C
Duration : 3±0.5s
Solder
: M705
Flux : Rosin 25% IPA 75%
Vibration Capacitance
Appearance
Measure value should not fluctuate during the
measurement.
There should be no significant abnormality.
As per 4.17 JIS C 5101-1
Frequency : 10 to 55 to 10Hz/min.
Amplitude : 1.5mm
Time : 2h each in X and Y directions
Mounting : The terminal is soldered on a print circuit board.
www.rohm.com
c 2012 ROHM Co., Ltd. All rights reserved.
4/5
2012.03 - Rev.E
Datasheet pdf - http://www.DataSheet4U.net/

4페이지












구       성 총 6 페이지수
다운로드[ TCTO.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
TCT

Chip tantalum capacitors

ROHM Semiconductor
ROHM Semiconductor
TCT104VG2AA-A00

Display Module

Kyocera
Kyocera

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵