Datasheet.kr   

NJ501-1400 데이터시트 PDF




Omron에서 제조한 전자 부품 NJ501-1400은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


 

PDF 형식의 NJ501-1400 자료 제공

부품번호 NJ501-1400 기능
기능 (NJ501-1300 - NJ501-1500) Machine Automation Controller
제조업체 Omron
로고 Omron 로고


NJ501-1400 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.




전체 30 페이지수

미리보기를 사용할 수 없습니다

NJ501-1400 데이터시트, 핀배열, 회로
Machine Automation Controller
NJ-series
Troubleshooting Manual
NJ501-1500
NJ501-1400
NJ501-1300
NJ301-1200
NJ301-1100
www.DataSheet.co.kr
W503-E1-02
Datasheet pdf - http://www.DataSheet4U.net/




NJ501-1400 pdf, 반도체, 판매, 대치품
Relevant Manuals
Relevant Manuals
There are three manuals that provide basic information on the NJ-series CPU Units: the NJ-series CPU
Unit Hardware User’s Manual, the NJ-series CPU Unit Software User’s Manual, and the NJ-series
Instructions Reference Manual.
Most operations are performed from the Sysmac Studio Automation Software. Refer to the Sysmac Stu-
dio Version 1 Operation Manual (Cat. No. W504) for information on the Sysmac Studio.
Other manuals are necessary for specific system configurations and applications.
Read all of the manuals that are relevant to your system configuration and application to make the most
of the NJ-series CPU Unit.
Basic information
NJ-series User’s Manuals
Introduction to NJ-series Controllers
Setting devices and hardware
Using motion control
Using EtherCAT
Using EtherNet/IP
Using CJ-series Units
Software settings
Using motion control
Using EtherCAT
Using EtherNet/IP
Programming
Using motion control
Using EtherCAT
Using CJ-series Units
Programming error processing
Testing operation and debugging
Using motion control
Using EtherCAT
Using EtherNet/IP
Troubleshooting and managing
errors in an NJ-series Controller
Maintenance
Use the
relevant
manuals for
references
according to
any error that
occurs.
Using EtherCAT
Using EtherNet/IP
Using CJ-series Units
www.DataSheet.co.kr
2
NJ-series Troubleshooting Manual (W503)
Datasheet pdf - http://www.DataSheet4U.net/

4페이지










NJ501-1400 전자부품, 판매, 대치품
Manual Structure
Manual Structure
Page Structure
The following page structure is used in this manual.
4 Installation and Wiring
Level 2 heading
Level 3 heading
A step in a procedure
Indicates a procedure.
4-3 Mounting Units
4-3-1 Connecting Controller Components
The Units that make up an NJ-series Controller can be connected simply by pressing the Units together
and locking the sliders by moving them toward the back of the Units. The End Cover is connected in the
same way to the Unit on the far right side of the Controller.
1 Join the Units so that the connectors fit exactly.
Hook
Hook holes
Connector
Level 1 heading
Level 2 heading
Level 3 heading
Gives the current
headings.
Special information
Icons indicate
precautions, additional
information, or reference
information.
2 The yellow sliders at the top and bottom of each Unit lock the Units together. Move the sliders
toward the back of the Units as shown below until they click into place.
Move the sliders toward the back
until they lock into place.
Lock
Release
4
Slider
www.DataSheet.co.kr
Precautions for Correct Use
The sliders on the tops and bottoms of the Power Supply Unit, CPU Unit, I/O Units, Special I/O
Units, and CPU Bus Units must be completely locked (until they click into place) after connecting
the adjacent Unit connectors.
Page tab
Gives the number
of the main section.
Manual name
NJ-series CPU Unit Hardware User’s Manual (W500)
4-9
This illustration is provided only as a sample. It may not literally appear in this manual.
Special Information
Special information in this manual is classified as follows:
Precautions for Safe Use
Precautions on what to do and what not to do to ensure safe usage of the product.
Precautions for Correct Use
Precautions on what to do and what not to do to ensure proper operation and performance.
Additional Information
Additional information to read as required.
This information is provided to increase understanding or make operation easier.
Note References are provided to more detailed or related information.
NJ-series Troubleshooting Manual (W503)
5
Datasheet pdf - http://www.DataSheet4U.net/

7페이지


구       성 총 30 페이지수
다운로드[ NJ501-1400.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
NJ501-1400

(NJ501-1300 - NJ501-1500) Machine Automation Controller

Omron
Omron

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵