|
|
PDF A043FL01_V5 Data sheet ( Hoja de datos )
| Número de pieza | A043FL01_V5 | |
| Descripción | Color TFT LCD Module | |
| Fabricantes | AUO | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de A043FL01_V5 (archivo pdf) en la parte inferior de esta página. Total 19 Páginas | ||
|
No Preview Available !
Doc. Version
Total Page
Date
0.1
24
2008/07/22
Product Specification
4.3" COLOR TFT-LCD MODULE
www.DataSheet.co.kr
MODEL NAME: A043FL01 V5
< >Preliminary Specification
< >Final Specification
Note: The content of this
specification is subject to change.
© 2008 AU Optronics
All Rights Reserved,
Do Not Copy.
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM AU OPTRONICS CORP.
Datasheet pdf - http://www.DataSheet4U.net/
1 page  
C. Physical Specifications
NO. Item
Unit
1 Display Resolution
dot
2 Active Area mm
3 Screen Size inch
4 Dot Pitch mm
5 Color Configuration
--
6 Color Depth
--
7 Overall Dimension mm
8 Weight
g
9 Touch panel surface treatment
--
10 Display Mode
--
11 Gray Level Inversion Direction
Note 1: Below figure shows dot stripe arrangement.
Version
Page:
0.1
5/19
Specification
480 RGB (H)×272(V)
95.04(H)×53.856(V)
4.3(Diagonal)
0.066(H)×0.198(V)
R. G. B. Stripe
16.7M Colors
105.5(H) × 67.2(V) × 3.9(T)
56
Hard coating 3H
Normally White
6 O’clock
Remark
Note 1
Note 2
www.DataSheet.co.kr
Note 2: Not including FPC. Refer to the drawing next page for further information.
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM AU OPTRONICS CORP.
Datasheet pdf - http://www.DataSheet4U.net/
5 Page 
Version
Page:
0.1
11/19
5. AC Timing
a. Power on/off sequence
Power On (Display ON; Standby Disabling)
The LCD driver is in default standby mode after VDD/VDDIO power-on, and set the register DISP to
high to disable the standby mode is required for normal operation. When the standby mode is
disabled, a build-in power on sequence is started. The driver IC analog power VDD2 is turned on
first, and then the LCD positive and negative power supplies VGH/VGL are pumped, and followed
by the LED power. Since we recommend using external LED driver, the backlight power should be
provided at this time. Please refer to power on sequence for the detail timing.
1 frame 1 frame 1 frame 2 frames
VSYNC
DISP
(pin / register)
VDD2
VGH
VGL
VST,VCK
DAC output
FRP
VLED
Output = 0V
www.DataSheet.co.kr
Normal
Power-Off (Display Off; Standby Enabling)
When the register DISP is set to low to enable standby mode, a build-in power off sequence is
started. Please also refer to the power off sequence for the detail timing.
VDDIO , VDD
1 frame 2 frames
2 frames
VSYNC
DISP
(pin / register)
VDD2,VGH,VGL
VST,VCK
DAC output
FRP
VLED
Normal
VGH,VGL=0V
White White
Output = 0V
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM AU OPTRONICS CORP.
Datasheet pdf - http://www.DataSheet4U.net/
11 Page | ||
| Páginas | Total 19 Páginas | |
| PDF Descargar | [ Datasheet A043FL01_V5.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| A043FL01-V2 | Color TFT LCD Module | AUO |
| A043FL01-V3 | Color TFT LCD Module | AUO |
| A043FL01-V4 | Color TFT LCD Module | AUO |
| A043FL01-V5 | Color TFT LCD Module | AUO |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |