|
|
Número de pieza | CSD-892-73 | |
Descripción | Digital Conversion Module | |
Fabricantes | Minebea | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de CSD-892-73 (archivo pdf) en la parte inferior de esta página. Total 8 Páginas | ||
No Preview Available ! Specifications
Digital Conversion Module
CSD-892-73
Spec. No.EN382892-73A
1/8
1.General
This instrument is the digital conversion module for strain gage applied transducers which adopt the DIN
mounting type and in suitable with built-in control panel.
2.Specifications
2-1.Specifications for analog
• Bridge power supply
• Applicable transducers
• Input sensitivity
• Input range
• Zero adjustment range
• Non-Linearity
• Temperature coefficient
Zero point
Sensitivity
• Input noise
• Anlog filter
• A/D sampling
• A/D internal resolution
DC5 V±0.25 V within 60 mA, with sensing
Up to 4 pieces of strain gage applied transducers(350 ohm) can be
connectable.
0.15 μV/d or more (d=minimum scale)
* 0.2 μV/d (In case of applying CE conformity standard.)
-3.1 mV/V to 3.1 mV/V
±2.5 mV/V
0.01 %F.S.
±0.2 μV/℃
(When the calibration is made at 0.2 μV/d or more of the input sensitivity.)
±0.001 5 %F.S./℃
(When the calibration is made at 0.2 μV/d or more of the input sensitivity.)
±0.2 μVp-p or less
(At the default setting of analog filter, digital filter and stabilization filter.)
Approx. 4Hz (Changeablewww.DataSheet.co.kr to 2Hz, 6Hz, 8Hz, 10Hz)
500 times/s (Changeable to 250 times/s, 100 times/s, 50 times/s.)
24 bits
2-2.Specification for digital
• Main display (Load display)
Display range
-99 999 to 99 999
Display increment
Display unit
Over display
AD value over display
1 (Changeacle to 2, 5, 10, 20, 50)
FSTN liquid crystal (With umber color LED back light.)
“-OL” display at minus over, “OL” display at plus over
“-OVF” display at minus over, “OVF” display at plus over
• Condision display
ZERO, SPAN, mV/V, STABLE, TARE, GROSS, NET, CZ, LOCK, HOLD,
ERROR
• Display rate
2 times/s
• Judgement display
OUT 1, 2, 3, 4, 5
• Decimal point display
No display, 101, 102 ,103 and 104 changeable.
• Unit display
No display, g, kg, t , N, kN, lb, Pa, kPa or MPa changeable.
MINEBEA Co., Ltd. Measuring Components Business Unit Revised in Mar 2012
Datasheet pdf - http://www.DataSheet4U.net/
1 page Specifications
CSD-892-73
Spec. No.EN382892-73A
2-7.CC-Link interface
• Version of CC-Link
: Ver.1.10
Occupied stations Nos. : Selectable from 1, 2 or 4 stations.
• Specifications
Baud rate
: Selectable from 156 kbps, 625 kbps, 2.5 Mbps, 5 Mbps or 10 Mbps.
Communication method : Poling method
Synchronous method : Bit synchronous method
Transmission route
: RS-485 bus
Transmission format : HDLC comforming
Remote station
: 01 to 64 when one station is occupied.
01 to 63 when two stations are occupied.
01 to 61 when four stations are occupied.
Connectable units
: 64 units at maximum with occupied one station.
32 units at maximum with occupied two stations.
Connectable cable
16 units at maximum with occupied four stations.
: Shielded twist pair special cable for “CC-Link”
Termination
: Attached with 110 ohm resistance externally.
Status LED
: Display the communication status by four (4)
LEDs of “RUN” ,“ERR”, “SD” and “RD”.
5/8
• Connector configuration of CC-Link
Pin No. Signal name
Signal name
1 DA Signal cable at DA side
2 DB Signal cable at DB side
3 DG
4 SLD
Signal cable ground
www.DataSheet.co.kr
Shield
5 FG
Frame ground
* Suitable plug for CC-Link connector plug : MSTB 2, 5/5-ST-5, 08 ABGY AU (made by Phoenix Contact.)
* “SLD” and “FG” are connected in the instrument.
• Function
(1) Reading out the load.
(2) Actual load calibration.
(3) Reading out the condition
(4) Changing the condition
(5) Reading out the setting of basic function, I/O, measurement operation and sequence control.
(6) Changing the setting of basic function, I/O, measurement operation and sequence control.
* CC-Link is abbreviation of Control & Communication Link.
MINEBEA Co., Ltd. Measuring Components Business Unit Revised in Mar 2012
Datasheet pdf - http://www.DataSheet4U.net/
5 Page |
Páginas | Total 8 Páginas | |
PDF Descargar | [ Datasheet CSD-892-73.PDF ] |
Número de pieza | Descripción | Fabricantes |
CSD-892-73 | Digital Conversion Module | Minebea |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |