|
|
PDF MGF4934CM Data sheet ( Hoja de datos )
| Número de pieza | MGF4934CM | |
| Descripción | SUPER LOW NOISE InGaAs HEMT | |
| Fabricantes | Mitsubishi Electric Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de MGF4934CM (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
Apr./2008
MITSUBISHI SEMICONDUTOR <GaAs FET>
MGF4934CM
SUPER LOW NOISE InGaAs HEMT (4pin flat lead package)
DESCRIPTION
The MGF4934CM super-low noise HEMT (High Electron Mobility
Transistor) is designed for use in S to Ku band amplifiers.
The 4pin flat lead package is small-thin size, and offers high cost
performance.
Outline Drawing
FEATURES
Low noise figure
@ f=12GHz
NFmin. = 0.50dB (Typ.)
High associated gain
@ f=12GHz
Gs = 13.0dB (Typ.)
APPLICATION
S to Ku band low noise amplifiers
QUALITY GRADE
GG
RECOMMENDED BIAS CONDITIONS
VDS=2V , ID=10mA
Fig.1
MITSUBISHI Proprietary
Not to be reproduced or disclosed
without permission by Mitsubishi Electric
ORDERING INFORMATION
Tape & reel 3000pcs/reel
Keep Safety first in your circuit designs!
Mitsubishi Electric Corporation puts the maximum effort into making
semiconductor products better and more reliable , but there is always the
possibility that trouble may occur with them. Trouble with semiconductors
may lead to personal injury , fire or property damage. Remember to give due
consideration to safetywww.DataSheet.net/ when making your circuit designs , with appropriate
measure such as (I) placement of substitutive , auxiliary circuits , (ii) use of
non-flammable material or (iii) prevention against any malfunction or mishap.
ABSOLUTE MAXIMUM RATINGS
Symbol
VGDO
VGSO
ID
Parameter
Gate to drain voltage
Gate to source voltage
Drain current
PT Total power dissipation
Tch Channel temperature
Tstg Storage temperature
ELECTRICAL CHARACTERISTICS
Symbol
Parameter
(Ta=25°C )
Ratings
-3
-3
IDSS
50
125
-55 to +125
Unit
V
V
mA
mW
°C
°C
(Ta=25°C )
Test conditions
V(BR)GDO
IGSS
IDSS
VGS(off)
Gs
NFmin.
Gate to drain breakdown voltage
Gate to source leakage current
Saturated drain current
Gate to source cut-off voltage
Associated gain
Minimum noise figure
IG=-10µA
VGS=-2V,VDS=0V
VGS=0V,VDS=2V
VDS=2V,ID=500µA
VDS=2V,
ID=10mA,f=12GHz
MIN.
-3.5
--
12
-0.1
11.5
--
Limits
TYP.
--
--
--
--
13.0
0.50
MAX
--
50
60
-1.5
--
0.75
Unit
V
µA
mA
V
dB
dB
MITSUBISHI
(1/5)
Datasheet pdf - http://www.DataSheet4U.co.kr/
1 page  
Apr./2008
MITSUBISHI SEMICONDUTOR <GaAs FET>
MGF4934CM
SUPER LOW NOISE InGaAs HEMT (4pin flat lead package)
Requests Regarding Safety Designs
Mitsubishi Electric constantly strives to raise the level of its quality and reliability. Despite these concerted efforts,
however, there will be occasions when our semiconductor products suffer breakdowns, malfunctions or other problems.
In view of this reality, it is requested that every feasible precaution be taken in the pursuit of redundancy design,
malfunction prevention design and other safety-related designs, to prevent breakdowns or malfunctions in our products
from resulting in accidents involving people, fires, social losses or other problems, thereby upholding the highest levels of
safety in the products when in use by customers.
Matters of Importance when Using these Materials
1. These materials are designed as reference materials to ensure that all customers purchase Mitsubishi Electric
semiconductors best suited to their specific use applications. Please be aware, however, that the technical information
contained in these materials does not comprise consent for the execution or use of intellectual property rights or other
rights owned by Mitsubishi Electric Corporation.
2. Mitsubishi Electric does not assume responsibility for damages resulting from the use of product data, graphs, charts,
programs, algorithms or other applied circuit examples described in these materials, or for the infringement of the
rights of third-party owners resulting from such use.
3. The data, graphs, charts, programs, algorithms and all other information described in these materials were current at
the issue of these materials, with Mitsubishi Electric reserving the right to make any necessary updates or changes in
the products or specifications in these materials without prior notice. Before purchasing Mitsubishi Electric
semiconductor products, therefore, please obtain the latest available information from Mitsubishi Electric directly or an
authorized dealer.
4. Every possible effort has been made to ensure that the information described in these materials is fully accurate.
However, Mitsubishi Electric assumes no responsibility for damages resulting from inaccuracies occurring within these
materials.
5. When using the product data, technical contents indicated on the graphs, charts, programs or algorithms described in
these materials, assessments should not be limited to only the technical contents, programs and algorithm units.
Rather, it is requested that ample evaluations be made of each individual system as a whole, with the customer
www.DataSheet.net/
assuming full responsibility for decisions on the propriety of application. Mitsubishi Electric does not accept
responsibility for the propriety of application.
6. The products described in these materials, with the exception of special mention concerning use and reliability, have
been designed and manufactured with the purpose of use in general electronic machinery. Accordingly these products
have not been designed and manufactured with the purpose of application in machinery or systems that will be used
under conditions that can affect human life, or in machinery or systems used in social infrastructure that demand a
particularly high degree of reliability. When considering the use of the products described in these materials in
transportation machinery (automobiles, trains, vessels), for objectives related to medical treatment, aerospace, nuclear
power control, submarine repeaters or systems or other specialized applications, please consult with Mitsubishi
Electric directly or an authorized dealer.
7. When considering use of products for purposes other than the specific applications described in these materials,
please inquire at Mitsubishi Electric or an authorized dealer.
8. The prior consent of Mitsubishi Electric in writing is required for any reprinting or reproduction of these materials.
9. Please direct any inquiries regarding further details of these materials, or any other comments or matters of attention,
to Mitsubishi Electric or an authorized dealer.
MITSUBISHI
(5/5)
Datasheet pdf - http://www.DataSheet4U.co.kr/
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet MGF4934CM.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| MGF4934CM | SUPER LOW NOISE InGaAs HEMT | Mitsubishi Electric Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |