|
|
|
부품번호 | 2SA0886 기능 |
|
|
기능 | Silicon PNP epitaxial planar type (For low-frequency power amplification Complementary) | ||
제조업체 | Panasonic Semiconductor | ||
로고 | |||
전체 5 페이지수
Power Transistors
2SA0886 (2SA886)
Silicon PNP epitaxial planar type
For low-frequency power amplification
Complementary to 2SC1847
■ Features
• Output of 4 W can be obtained by a complementary pair with
2SC1847
• TO-126B package which requires no insulation plate for installa-
tion to the heat sink
■ Absolute Maximum Ratings Ta = 25°C
Parameter
Symbol Rating
Collector-base voltage (Emitter open)
Collector-emitter voltage (Base open)
Emitter-base voltage (Collector open)
Collector current
Peak collector current
Collector power dissipation
Junction temperature
Storage temperature
VCBO
VCEO
VEBO
IC
ICP
PC
Tj
Tstg
−50
−40
−5
−1.5
−3
1.2
150
−55 to +150
Unit
V
V
V
A
A
W
°C
°C
φ 3.16±0.1
8.0+–00..15
Unit: mm
3.2±0.2
0.75±0.1
0.5±0.1
4.6±0.2
2.3±0.2
0.5±0.1 1.76±0.1
1: Emitter
123
2: Collector
3: Base
TO-126B-A1 Package
■ Electrical Characteristics Ta = 25°C ± 3°C
Parameter
Collector-base voltage (Emitter open)
Collector-emitter voltage (Base open)
Collector-base cutoff current (Emitter open)
Collector-emitter cutoff current (Base open)
Emitter-base cutoff current (Collector open)
Forward current transfer ratio *
Collector-emitter saturation voltage
Base-emitter saturation voltage
Transition frequency
Collector output capacitance
(Common base, input open circuited)
Symbol
VCBO
VCEO
ICBO
ICEO
IEBO
hFE
VCE(sat)
VBE(sat)
fT
Cob
Conditions
IC = −1 mA, IE = 0
IC = −2 mA, IB = 0
VCB = −20 V, IE = 0
VCE = −10 V, IB = 0
VEB = −5 V, IC = 0
VCE = −5 V, IC = −1 A
IC = −1.5 A, IB = − 0.15 A
IC = −2 A, IB = − 0.2 A
VCB = −5 V, IE = 0.5 A, f = 200 MHz
VCB = −20 V, IE = 0, f = 1 MHz
Min Typ Max Unit
−50 V
−40 V
−1 µA
−100 µA
−10 µA
80 220
−1.0 V
−1.5 V
150 MHz
45 pF
Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors.
2. *: Rank classification
Rank
Q
R
hFE1
80 to 160
120 to 220
Publication date: February 2003
Note) The part numbers in the parenthesis show conventional part number.
SJD00003BED
1
Request for your special attention and precautions in using the technical information
and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government
if any of the products or technologies described in this material and controlled under the "Foreign
Exchange and Foreign Trade Law" is to be exported or taken out of Japan.
(2) The technical information described in this material is limited to showing representative characteris-
tics and applied circuits examples of the products. It neither warrants non-infringement of intellec-
tual property right or any other rights owned by our company or a third party, nor grants any license.
(3) We are not liable for the infringement of rights owned by a third party arising out of the use of the
product or technologies as described in this material.
(4) The products described in this material are intended to be used for standard applications or general
electronic equipment (such as office equipment, communications equipment, measuring instru-
ments and household appliances).
Consult our sales staff in advance for information on the following applications:
• Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment,
combustion equipment, life support systems and safety devices) in which exceptional quality and
reliability are required, or if the failure or malfunction of the products may directly jeopardize life or
harm the human body.
• Any applications other than the standard applications intended.
(5) The products and product specifications described in this material are subject to change without
notice for modification and/or improvement. At the final stage of your design, purchasing, or use of
the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that
the latest specifications satisfy your requirements.
(6) When designing your equipment, comply with the guaranteed values, in particular those of maxi-
mum rating, the range of operating power supply voltage, and heat radiation characteristics. Other-
wise, we will not be liable for any defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, take into the consideration of
incidence of break down and failure mode, possible to occur to semiconductor products. Measures
on the systems such as redundant design, arresting the spread of fire or preventing glitch are
recommended in order to prevent physical injury, fire, social damages, for example, by using the
products.
(7) When using products for which damp-proof packing is required, observe the conditions (including
shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets
are individually exchanged.
(8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written
permission of Matsushita Electric Industrial Co., Ltd.
2002 JUL
4페이지 | |||
구 성 | 총 5 페이지수 | ||
다운로드 | [ 2SA0886.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
2SA0885 | Silicon PNP Epitaxial Transistor | Panasonic Semiconductor |
2SA0886 | Silicon PNP epitaxial planar type (For low-frequency power amplification Complementary) | Panasonic Semiconductor |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |