|
|
|
부품번호 | MCR100 기능 |
|
|
기능 | (MCR Series) Thick Film Chip Resistors | ||
제조업체 | ROHM Semiconductor | ||
로고 | |||
전체 7 페이지수
Thick Film Chip Resistors
MCR Series < Automotive >
Features
1) Full line up from ultra small size (01005) to 2512 with jumper type.
2) High reliability metal glazed thick film.
3) ROHM resistors have obtained ISO9001/ISO/TS16949 certification.
4) "Automotive" product is AEC-Q200 compliant.
Part No.
MCR004
Size
(mm)
(inch)
0402
01005
Type Code
GENERAL PURPOSE
AUTOMOTIVE
∗Corresponds to
AEC−Q200
YZP −
RZP
−
MCR006
0603
0201
YRT
YZP
MCR01
MCR03
MCR10
1005
0402
1608
0603
2012
0805
MRT
MZP
PZPI
(*For further information on datasheet,
please refer to AUTOMOTIVE datasheet.)
ERT
EZP
MZP / PZPI
(*For further information on datasheet,
please refer to AUTOMOTIVE datasheet.)
ERT
EZP
MCR18
3216
1206
ERT
EZP
MCR25
3225
1210
JZH
MCR50
5025
2010
JZH
MCR100
6432
2512
JZH
∗Please contact us for status of AEC-Q200 on "General purpose" products.
Part Number Description
MCR
0 0 6 YRT
J
Packing
Specification
Paper tape
(2mm pitch)
Embossed tape
(1mm pitch)
Paper tape
(2mm pitch)
Bulk case
Paper tape
(4mm pitch)
MZP : Paper tape
(2mm pitch)
PZPI : Bulk case
Paper tape
(4mm pitch)
Quantity / Reel
15,000
40,000
15,000
10,000
50,000
5,000
MZP : 10,000
PZPI : 25,000
5,000
Embossed tape
(4mm pitch)
4,000
100
Part No.
MCR
(Micro chip resistors)
Size (mm [inch])
004 (0402 [01005])
006 (0603 [0201])
01 (1005 [0402])
03 (1608 [0603])
10 (2012 [0805])
18 (3216 [1206])
25 (3225 [1210])
50 (5025 [2010])
100 (6432 [2512])
www.rohm.com
○c 2012 ROHM Co., Ltd. All rights reserved.
Type Code
Resistance Tolerance
D ( ±0.5% )
F ( ±1% )
FX ( ±1% ) ∗Only MCR03EZP/MZP/PZPI
J ( ±5% ) (Including jumper type)
Nominal Resistance
Resistance code, 3 or 4 digits.
000 denotes jumper type.
Resistance
tolerance
D,F :
J:
Resistance
code
4 digits
3 digits
Ex.)
1Ω = 1R0 ( ±5% )
9.1 Ω = 9R1 ( ±5% )
10 Ω = 10R0 ( ±0.5%,±1% )
100 ( ±5% )
2.2M Ω = 2204 ( ±1% )
225 ( ±5% )
1/6 2012.11 - Rev.D
Free Datasheet http://www.datasheet4u.com/
MCR series < Automotive >
Data Sheet
Derating Curve
When the ambient temperature exceeds 70°C, power dissipation must be adjusted according to the derating curves below.
MCR006 / 100
100
MCR01 / 03 / 10 / 18 / 25 / 50
100
80 80
60 60
40 40
20 20
0 −55
0 70 100 125
AMBIENT TEMPERATURE (°C)
0 −55
0 70 100
AMBIENT TEMPERATURE (°C)
155
Characteristics
Test Items
Guaranteed Value
Resistor Type
Jumper Type
Test Conditions
Resistance
See "Products List"
20°C
Variation of resistance
with temperature
See "Products List"
Measurement : +20 / −55 / +20 / +125°C
Overload
± (2.0%+0.1Ω)
Max. 50mΩ
Rated voltage (current) ×2.5, 2s.
Maximum overload voltage
Solderability
Resistance to
soldering heat
Rapid change of
temperature
A new uniform coating of minimum of
95% of the surface being immersed
and no soldering damage.
Rosin·Ethanol : 25% (Weight)
Soldering condition : 235±5°C
Duration of immersion : 2.0±0.5s
± (1.0%+0.05Ω)
Max. 50mΩ
No remarkable abnormality on the appearance.
Soldering condition : 260±5°C
Duration of immersion : 10±1s
± (1.0%+0.05Ω)
Max. 50mΩ
Test temp.
−55°C to +125°C 100cycle (MCR006 / 01 / 03)
−55°C to +125°C 5cycle (MCR10 / 18 / 25 / 50 / 100)
Damp heat, steady state
Endurance at 70°C
Endurance
Resistance to solvent
Bend strength of
the end face plating
± (3.0%+0.1Ω)
Max. 100mΩ
± (3.0%+0.1Ω)
Max. 100mΩ
± (3.0%+0.1Ω)
Max. 100mΩ
± (1.0%+0.05Ω)
Max. 50mΩ
± (1.0%+0.05Ω)
Max. 50mΩ
Without mechanical damage such as breaks.
40°C, 93%RH (Relative Humidity)
Test time : 1,000h to 1,048h
70°C
Rated voltage (current)
1.5h : ON − 0.5h : OFF
Test time : 1,000h to 1,048h
125°C (MCR006 / 25 / 50 / 100)
155°C (MCR01 / 03 / 10 / 18)
Test time : 1,000h to 1,048h
23±5°C, Immersion cleaning, 5±0.5min
Solvent : 2−propanol
−
Compliance Standard(s) : IEC60115−8
JISC 5201−8
Chip weight (typical value)
Parameter
Unit
MCR006 MCR01
MCR03
YZP MZP / PZPI EZP / MZP / PZPI
MCR10
EZP
Weight
mg/pc 0.157
0.70
2.12
5.03
MCR18
EZP
9.46
MCR25
JZH
16.5
MCR50
JZH
25.8
MCR100
JZH
42.0
www.rohm.com
○c 2012 ROHM Co., Ltd. All rights reserved.
4/6
2012.11 - Rev.D
Free Datasheet http://www.datasheet4u.com/
4페이지 Notice
Notes
No copying or reproduction of this document, in part or in whole, is permitted without the
consent of ROHM Co.,Ltd.
The content specified herein is subject to change for improvement without notice.
The content specified herein is for the purpose of introducing ROHM's products (hereinafter
"Products"). If you wish to use any such Product, please be sure to refer to the specifications,
which can be obtained from ROHM upon request.
Examples of application circuits, circuit constants and any other information contained herein
illustrate the standard usage and operations of the Products. The peripheral conditions must
be taken into account when designing circuits for mass production.
Great care was taken in ensuring the accuracy of the information specified in this document.
However, should you incur any damage arising from any inaccuracy or misprint of such
information, ROHM shall bear no responsibility for such damage.
The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or
implicitly, any license to use or exercise intellectual property or other rights held by ROHM and
other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the
use of such technical information.
The Products specified in this document are intended to be used with general-use electronic
equipment or devices (such as audio visual equipment, office-automation equipment, commu-
nication devices, electronic appliances and amusement devices).
The Products specified in this document are not designed to be radiation tolerant.
While ROHM always makes efforts to enhance the quality and reliability of its Products, a
Product may fail or malfunction for a variety of reasons.
Please be sure to implement in your equipment using the Products safety measures to guard
against the possibility of physical injury, fire or any other damage caused in the event of the
failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM
shall bear no responsibility whatsoever for your use of any Product outside of the prescribed
scope or not in accordance with the instruction manual.
The Products are not designed or manufactured to be used with any equipment, device or
system which requires an extremely high level of reliability the failure or malfunction of which
may result in a direct threat to human life or create a risk of human injury (such as a medical
instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-
controller or other safety device). ROHM shall bear no responsibility in any way for use of any
of the Products for the above special purposes. If a Product is intended to be used for any
such special purpose, please contact a ROHM sales representative before purchasing.
If you intend to export or ship overseas any Product or technology specified herein that may
be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to
obtain a license or permit under the Law.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2012 ROHM Co., Ltd. All rights reserved.
R1120A
Free Datasheet http://www.datasheet4u.com/
7페이지 | |||
구 성 | 총 7 페이지수 | ||
다운로드 | [ MCR100.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
MCR10 | Thick film rectangular | ROHM Semiconductor |
MCR10 | (MCR Series) Thick Film Chip Resistors | ROHM Semiconductor |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |