|
|
Número de pieza | ADV7611 | |
Descripción | Low Power 165MHz HDMI Receiver | |
Fabricantes | Analog Devices | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de ADV7611 (archivo pdf) en la parte inferior de esta página. Total 16 Páginas | ||
No Preview Available ! Data Sheet
Low Power 165 MHz HDMI Receiver
ADV7611
FEATURES
High-Definition Multimedia Interface (HDMI®) 1.4a features
supported
All mandatory and additional 3D video formats supported
Extended colorimetry, including sYCC601, Adobe RGB,
Adobe YCC 601, xvYCC extended gamut color
CEC 1.4-compatible
HDMI receiver
165 MHz maximum TMDS clock frequency
24-bit output pixel bus
High-bandwidth Digital Content Protection (HDCP) 1.4
support with internal HDCP keys
HDCP repeater support
Up to 127 KSVs supported
Integrated CEC controller
Programmable HDMI equalizer
5 V detect and Hot Plug assert for HDMI port
Audio support
SPDIF (IEC 60958-compatible) digital audio
HDMI audio extraction support
Advanced audio mute feature
General
Interrupt controller with two interrupt outputs
Standard identification (STDI) circuit
Highly flexible 24-bit pixel output interface
Internal EDID RAM
Any-to-any 3 × 3 color space conversion (CSC) matrix
2-layer PCB design supported
64-lead LQFP_EP, 10 mm × 10 mm package
Qualified for automotive applications
APPLICATIONS
Projectors
Automotive
Video conferencing
HDTVs
AVR, HTiB
Soundbars
Video switches
FUNCTIONAL BLOCK DIAGRAM
HDMI1
HDCP
KEYS
36
TMDS DEEP
COLOR
DDC HDMI Rx
HS/VS
FIELD/DE
COMPONENT
PROCESSOR LLC
DATA
4 I2S
S/PDIF
MCLK
SCLK
LRCLK
HS
VS/FIELD
DE
LLC
24-BIT
YCbCr/RGB
LRCLK
AP
MCLK
SCLK
Figure 1.
ADV7611
Rev. D
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113 ©2010-2012 Analog Devices, Inc. All rights reserved.
Free Datasheet http://www.datasheet4u.com/
1 page Data Sheet
ADV7611
DATA AND I2C TIMING CHARACTERISTICS
Table 2.
Parameter
CLOCK AND CRYSTAL
Crystal Frequency, XTALP
Crystal Frequency Stability
LLC Frequency Range1
I2C PORTS
SCL Frequency
SCL Minimum Pulse Width High2
SCL Minimum Pulse Width Low2
Start Condition Hold Time2
Start Condition Setup Time2
SDA Setup Time2
SCL and SDA Rise Time2
SCL and SDA Fall Time2
Stop Condition Setup Time2
RESET FEATURE
Reset Pulse Width
CLOCK OUTPUTS
LLC Mark-Space Ratio2
Symbol Test Conditions/Comments
t1
t2
t3
t4
t5
t6
t7
t8
t9:t10
DATA AND CONTROL OUTPUTS3
Data Output Transition Time2, 4
I2S PORT, MASTER MODE
SCLK Mark-Space Ratio2
t11
t12
t15:t16
End of valid data to negative clock edge
Negative clock edge to start of valid data
LRCLK Data Transition Time2
LRCLK Data Transition Time2
I2S Data Transition Time2, 5
I2S Data Transition Time2, 5
t17 End of valid data to negative SCLK edge
t18 Negative SCLK edge to start of valid data
t19 End of valid data to negative SCLK edge
t20 Negative SCLK edge to start of valid data
1 Maximum LLC frequency is limited by the clock frequency of UXGA 60 Hz at 8 bit.
2 Data guaranteed by characterization.
3 With the DLL block on output clock bypassed.
4 DLL bypassed on clock path.
5 I2S is accessible via the AP pin.
Min
13.5
600
1.3
600
600
100
0.6
5
45:55
45:55
Typ Max
28.63636
±50
165
400
300
300
55:45
1.0 2.2
0.0 0.3
55:45
10
10
5
5
Unit
MHz
ppm
MHz
kHz
ns
μs
ns
ns
ns
ns
ns
μs
ms
% duty
cycle
ns
ns
% duty
cycle
ns
ns
ns
ns
Rev. D | Page 5 of 16
Free Datasheet http://www.datasheet4u.com/
5 Page Data Sheet
FUNCTIONAL OVERVIEW
HDMI RECEIVER
The receiver supports all mandatory and many optional 3D
formats. It supports HDTV formats up to UXGA at 8 bit.
The HDMI-compatible receiver on the ADV7611 incorporates
programmable equalization of the HDMI data signals. This
equalization compensates for the high frequency losses inherent
in HDMI and DVI cabling, especially at longer lengths and higher
frequencies. It is capable of equalizing for cable lengths up to
30 meters to achieve robust receiver performance.
With the inclusion of HDCP, displays can receive encrypted
video content. The HDMI interface of the ADV7611 allows for
authentication of a video receiver, decryption of encoded data
at the receiver, and renewability of that authentication during
transmission, as specified by the HDCP 1.4 protocol.
The ADV7611 has a synchronization regeneration block used
to regenerate the DE based on the measurement of the video
format being displayed and to filter the horizontal and vertical
synchronization signals to prevent glitches. The HDMI receiver
also supports TERC4 error detection, used for detection of
corrupted HDMI packets following a cable disconnect.
The HDMI receiver contains an audio mute controller that
can detect a variety of conditions that may result in audible
extraneous noise in the audio output. On detection of these
conditions, the audio signal can be ramped to prevent audio
clicks or pops. Audio output can be formatted to LPCM and
IEC 61937.
The HDMI receiver features include:
• 162.5 MHz (UXGA at 8 bit) maximum TMDS clock
frequency
• 3D format support defined in HDMI 1.4a specification
• Integrated equalizer for cable lengths up to 30 meters
• HDCP 1.4
• Internal HDCP keys
• PCM audio packet support
• Repeater support
• Internal EDID RAM
• Hot Plug assert output pin for an HDMI port
• CEC controller
ADV7611
COMPONENT PROCESSOR
The ADV7611 has an any-to-any 3 × 3 CSC matrix. The CSC
block is placed at the back of the CP section. CSC enables
YPrPb-to-RGB and RGB-to-YCrCb conversions. Many other
standards of color space can be implemented using the color
space converter.
CP features include:
• 525i, 625i, 525p, 625p, 720p, 1080i, 1080p, and other
formats
• Manual adjustments including gain (contrast) and
offset (brightness), hue, and saturation
• Free run output mode that provides stable timing when no
video input is present
• 162.5 MHz processing rate
• Contrast, brightness, hue, and saturation controls
• Standard identification enabled by STDI block
• RGB that can be color space converted to YCrCb and
decimated to a 4:2:2 format for video-centric back end IC
interfacing
• DE output signal supplied for direct connection to an
HDMI/DVI transmitter
OTHER FEATURES
The ADV7611 has HS, VS, FIELD, and DE output signals with
programmable position, polarity, and width.
The ADV7611 has programmable interrupt request output pins,
including INT1 and INT2 (INT2 is accessible only via one of
following pins: MCLK/INT2, SCLK/INT2, or HPA_A/INT2).
It also features a low power-down mode. The I2C address of
the main map is 0x98 after reset. This can be changed after reset
to 0x9A if pullup is attached to VS/FIELD/ALSB pin and I2C
command SAMPLE_ALSB is issued. Refer to the Register
Access and Serial Ports Description section in the UG-180.
The ADV7611 is provided in a 10 mm × 10 mm, RoHS-compliant
LQFP_EP package, and is specified over the −40°C to +85°C
temperature range.
Rev. D | Page 11 of 16
Free Datasheet http://www.datasheet4u.com/
11 Page |
Páginas | Total 16 Páginas | |
PDF Descargar | [ Datasheet ADV7611.PDF ] |
Número de pieza | Descripción | Fabricantes |
ADV7610 | 165MHz HDMI Receiver | Analog Devices |
ADV7611 | Low Power 165MHz HDMI Receiver | Analog Devices |
ADV7612 | 225 MHz HDMI Receiver | Analog Devices |
ADV7613 | Low Power HDMI to LVDS Display Bridge | Analog Devices |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |