|
|
|
부품번호 | MT1102 기능 |
|
|
기능 | Hall-Effect Magnetic Position Sensors | ||
제조업체 | MagnTek | ||
로고 | |||
전체 5 페이지수
MT1102
CMOS Unipolar, Hall-Effect Magnetic Position Sensors
FEATURES
s Resistant to Physical Stress
s Superior Temperature Stability
s Chopper stablized amplifier
s Operation From Unregulated Supply
s High sensitivity
s Solid-State Reliability
s Open Drain output
s Small Size
These Hall-effect sensors are monolithic integrated circuits with
tighter magnetic specifications, designed to operate continuously over
extended temperatures to +125°C, and are more stable with both
temperature and supply voltage changes.
Each device includes a voltage regulator for operation with supply
voltages of 3.5 to 24 volts, hall plate with dynamic cancellation
system, temperature compensation circuitry, chopper stablized small-
signal amplifier, Schmitt trigger, and an open drain output to sink
up to 50 mA. With suitable output pull up, they can be used with
bipolar or CMOS logic circuits.
This sensor family includes most widely used industry package
type with same die inside:
MT1102A --- TO-92S
MT1102AT --- SOT-23
MT1102BT --- SOT-89B
ABSOLUTE MAXIMUM RATINGS
at TA = +25°C
Supply Voltage, VCC ........................ 28 V
Magnetic Flux Density, B ........... Unlimited
Output Off Voltage, VOUT ...................28 V
Continuous Output Current,
IOUT .......................................... 50 mA*
Reverse Output Current, IOUT ........ -50 mA
Junction Temperature, TJ .............. +150°C
Operating Temperature Range, T
A
-50°C to +125°C
Storage Temperature Range,
TS .............................. -50°C to +150°C
* Only when the Vcc=4.5V
Block Diagram
1 MagnTek Sensing technology
Free Datasheet http://www.datasheet4u.com/
MT1102
CMOS Unipolar, Hall-Effect Magnetic Position Sensors
PACKAGE DESIGNATOR
(MT1102BT)
Dimensions in Inches
2
NOTES: 1. Exact body and lead configuration at vendor’s option within limits shown.
2. Supplied in bulk pack (500 pieces per bag) or add "TR" to part number for tape and reel.
3. Only low-temperature (≤240°C) reflow-soldering techniques are recommended for SOT89 devices.
4 MagnTek Sensing technology
Free Datasheet http://www.datasheet4u.com/
4페이지 | |||
구 성 | 총 5 페이지수 | ||
다운로드 | [ MT1102.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
MT110 | Thyristor Modules | TECHSEM |
MT1102 | Hall-Effect Magnetic Position Sensors | MagnTek |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |