|
|
|
부품번호 | HS-8270 기능 |
|
|
기능 | 900 MHz Cordless Answering System Speakerphone Manual | ||
제조업체 | AT&T | ||
로고 | |||
USER’S MANUAL
Part 2
900 MHz Cordless Answering
System Speakerphone HS-8270
with Caller ID/Call Waiting
L1 L2
Please also read
Part 1 — Important
Product Information
AT&T and the globe symbol are registered trademarks of AT&T Corp. licensed to Advanced American Telephones.
Free Datasheet http://www.datasheet4u.com/
BEFORE YOU BEGIN
About Caller ID with Call Waiting
This product has a Caller ID with Call Waiting feature that lets you see
who’s calling while you’re on another call.
To use this feature, you may need to change your phone service. Contact
your local phone service provider if you have:
• no Caller ID or Call Waiting service
• either Caller ID or Call Waiting as a single service
• both Caller ID and Call Waiting, but as separate services (you may
need combined service).
You can also use this product with regular Caller ID service or no Caller ID
services. To turn off this phone’s Caller ID with Call Waiting feature, see
the FEATURE SETUP section of this manual.
There may be fees for Caller ID services, and such services may not be
available in all areas. This phone can provide information only if both you
and the caller are in areas offering Caller ID service, and if both telephone
companies use compatible equipment.
About Home and Local Area Codes
Always program your home area code, and, if you need them, your local area
codes (up to four — see page 9). Programming these area codes will
change how numbers are displayed in the call history, and will allow for
correct operation of the Display Dial feature (see page 39).
If you dial
For Enter as Home Code
7 digits
(phone number, no area code)
Calls within your
home area code
Your home area code
10 digits
(area code + phone number)
— OR —
11 digits
(1 + area code + phone number)
Calls within your
home area code
000
If you dial
For Enter as Local Codes
11 digits
All calls outside
No Local Area Codes
(1 + area code + phone number) your home area code
10 digits
(area code + phone number)
Some calls outside Area codes that do
your home area code not require a “1”
If you dial 10 digits (area code plus phone number) for calls within your own area
code, include your area code as a Local Area Code.
3
Free Datasheet http://www.datasheet4u.com/
4페이지 INSTALLATION
Modular
telephone
jack
Standard
electrical outlet
3 Connect the telephone line cord.
If you are wall mounting the phone, use the
short line cord and press the excess cord
into the groove on the bottom of the base.
4 Connect the
power cord.
5
6
7
8
9
10
11
6
Mount the base on the wall. (WALL MOUNTING ONLY)
Hold the base so the mounting knobs on the standard wall jack
will fit into the holes on the bottom of the base. Slide the base
down onto the knobs until it locks into place.
Charge the handset battery.
Place the handset face up or face down in the base.
Charge the battery at least 12 hours the first time. After the first
charge, the battery will quick-charge in only six hours.
Check for dial tone.
After the batteries are charged, lift the handset and press P;
you should hear a dial tone.
Set up Telephone features.
See page 8.
Set up Caller ID features.
See page 9.
Set up Answering System features.
See pages 10–14.
Set up Caller Specific Outgoing Announcements and
Talking Caller ID.
See pages 15–18.
Free Datasheet http://www.datasheet4u.com/
7페이지 | |||
구 성 | 총 30 페이지수 | ||
다운로드 | [ HS-8270.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
HS-8270 | 900 MHz Cordless Answering System Speakerphone Manual | AT&T |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |