|
|
PDF LMR341G Data sheet ( Hoja de datos )
| Número de pieza | LMR341G | |
| Descripción | Low Supply Current Ground Sense Operational Amplifiers | |
| Fabricantes | ROHM Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de LMR341G (archivo pdf) en la parte inferior de esta página. Total 7 Páginas | ||
|
No Preview Available !
Datasheet
Operational Amplifiers
Low Supply Current
Ground Sense Operational Amplifiers
LMR341G
●General Description
LMR341G is single CMOS Op-Amp with shutdown
function, low supply voltage operation and output full
swing. There are suitable for battery equipment.
MOS-FET input stage provide low input bias current. It is
capable to use for sensor applications.
●Features
Low operating supply voltage
Input Ground Sense, Output Full Swing
High large signal voltage gain
Low input bias current
Low supply current
Low input offset voltage
Shutdown function
●Applications
Customer electronics
Buffer
Active filter
Mobile equipment
Battery equipment
●Simplified Schematic
VDD
●Key Specifications
Low Operating Supply Voltage (single supply):
High voltage gain (RL=2KΩ):
Wide Temperature Range:
Turn on time from shutdown:
Low Input Offset Voltage:
Low Input Bias Current:
+2.7V to +5.0V
103dB(Typ.)
-40°C to +85°C
15μs (Typ.)
4mV (Max.)
1pA (Typ.)
●Package
SSOP6
W(Typ.) xD(Typ.) xH(Max.)
2.90mm x 2.80mm x 1.25mm
VBIAS1
+IN
Class AB
Control
OUT
-IN
SHDN
VSS
Shutdown
Control
VBI AS 2
Figure 1. Simplified Schematic
○Product structure：Silicon monolithic integrated circuit ○This product is not designed protection against radioactive rays.
www.rohm.com
©2013 ROHM Co., Ltd. All rights reserved.
TSZ22111･14･001
1/18
TSZ02201-0RAR1G200610-1-2
8.FEB.2013 Rev.001
Free Datasheet http://www.datasheet4u.com/
1 page  
Datasheet
Notice
●General Precaution
1) Before you use our Products, you are requested to carefully read this document and fully understand its contents.
ROHM shall not be in any way responsible or liable for failure, malfunction or accident arising from the use of any
ROHM’s Products against warning, caution or note contained in this document.
2) All information contained in this document is current as of the issuing date and subject to change without any prior
notice. Before purchasing or using ROHM’s Products, please confirm the latest information with a ROHM sales
representative.
●Precaution on using ROHM Products
1) Our Products are designed and manufactured for application in ordinary electronic equipments (such as AV equipment,
OA equipment, telecommunication equipment, home electronic appliances, amusement equipment, etc.). If you
intend to use our Products in devices requiring extremely high reliability (such as medical equipment, transport
equipment, traffic equipment, aircraft/spacecraft, nuclear power controllers, fuel controllers, car equipment including car
accessories, safety devices, etc.) and whose malfunction or failure may cause loss of human life, bodily injury or
serious damage to property (“Specific Applications”), please consult with the ROHM sales representative in advance.
Unless otherwise agreed in writing by ROHM in advance, ROHM shall not be in any way responsible or liable for any
damages, expenses or losses incurred by you or third parties arising from the use of any ROHM’s Products for Specific
Applications.
2) ROHM designs and manufactures its Products subject to strict quality control system. However, semiconductor
products can fail or malfunction at a certain rate. Please be sure to implement, at your own responsibilities, adequate
safety measures including but not limited to fail-safe design against the physical injury, damage to any property, which
a failure or malfunction of our Products may cause. The following are examples of safety measures:
[a] Installation of protection circuits or other protective devices to improve system safety
[b] Installation of redundant circuits to reduce the impact of single or multiple circuit failure
3) Our Products are designed and manufactured for use under standard conditions and not under any special or
extraordinary environments or conditions, as exemplified below. Accordingly, ROHM shall not be in any way
responsible or liable for any damages, expenses or losses arising from the use of any ROHM’s Products under any
special or extraordinary environments or conditions. If you intend to use our Products under any special or
extraordinary environments or conditions (as exemplified below), your independent verification and confirmation of
product performance, reliability, etc, prior to use, must be necessary:
[a] Use of our Products in any types of liquid, including water, oils, chemicals, and organic solvents
[b] Use of our Products outdoors or in places where the Products are exposed to direct sunlight or dust
[c] Use of our Products in places where the Products are exposed to sea wind or corrosive gases, including Cl2,
H2S, NH3, SO2, and NO2
[d] Use of our Products in places where the Products are exposed to static electricity or electromagnetic waves
[e] Use of our Products in proximity to heat-producing components, plastic cords, or other flammable items
[f] Sealing or coating our Products with resin or other coating materials
[g] Use of our Products without cleaning residue of flux (even if you use no-clean type fluxes, cleaning residue of
flux is recommended); or Washing our Products by using water or water-soluble cleaning agents for cleaning
residue after soldering
[h] Use of the Products in places subject to dew condensation
4) The Products are not subject to radiation-proof design.
5) Please verify and confirm characteristics of the final or mounted products in using the Products.
6) In particular, if a transient load (a large amount of load applied in a short period of time, such as pulse) is applied,
confirmation of performance characteristics after on-board mounting is strongly recommended. Avoid applying power
exceeding normal rated power; exceeding the power rating under steady-state loading condition may negatively affect
product performance and reliability.
7) De-rate Power Dissipation (Pd) depending on Ambient temperature (Ta). When used in sealed area, confirm the actual
ambient temperature.
8) Confirm that operation temperature is within the specified range described in the product specification.
9) ROHM shall not be in any way responsible or liable for failure induced under deviant condition from what is defined in
this document.
Notice - Rev.004
© 2013 ROHM Co., Ltd. All rights reserved.
Free Datasheet http://www.datasheet4u.com/
5 Page | ||
| Páginas | Total 7 Páginas | |
| PDF Descargar | [ Datasheet LMR341G.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| LMR341G | Low Supply Current Ground Sense Operational Amplifiers | ROHM Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |