DataSheet.es    


PDF SMBJ9.0 Data sheet ( Hoja de datos )

Número de pieza SMBJ9.0
Descripción (SMBJ Series) Surface Mount Transient Voltage Suppressor
Fabricantes Taiwan Semiconductor 
Logotipo Taiwan Semiconductor Logotipo



Hay una vista previa y un enlace de descarga de SMBJ9.0 (archivo pdf) en la parte inferior de esta página.


Total 4 Páginas

No Preview Available ! SMBJ9.0 Hoja de datos, Descripción, Manual

SMBJ SERIES
Surface Mount Transient Voltage Suppressor
Voltage Range
5.0 to 170 Volts
600 Watts Peak Power
Features
SMB/DO-214AA
For surface mounted application
Low profile package
Built-in strain relief
Glass passivated junction
Excellent clamping capability
Fast response time: Typically less than 1.0ps from 0 volt to
BV min.
Typical IR less than 1μA above 10V
High temperature soldering guaranteed:
260OC / 10 seconds at terminals
Plastic material used carries Underwriters Laboratory
Flammability Classification 94V-0
600 watts peak pulse power capability with a 10 x 1000 us
waveform by 0.01% duty cycle
Mechanical Data
Case: Molded plastic
Terminals: Solder plated
Polarity: Indicated by cathode bandexcept bipolar
Standard packaging: 12mm tape (EIA STD RS-481)
Weight: 0.093gram
.082(2.08)
.076(1.93)
.147(3.73)
.137(3.48)
.187(4.75)
.167(4.25)
.012(.31)
.006(.15)
.103(2.61)
.078(1.99)
.056(1.41)
.035(0.90)
.008(.20)
.004(.10)
.208(5.28)
.200(5.08)
.012(.31)
.006(.15)
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25ambient temperature unless otherwise specified.
Type Number
Peak Power Dissipation at TA=25OC, Tp=1ms(Note
1)
Symbol
PPK
Value
Minimum 600
Units
Watts
Steady State Power Dissipation
Pd 3 Watts
Peak Forward Surge Current, 8.3 ms Single Half
Sine-wave Superimposed on Rated Load
(JEDEC method) (Note 2, 3) - Unidirectional Only
IFSM
100 Amps
Maximum Instantaneous Forward Voltage at
50.0A for Unidirectional Only (Note 4)
VF
3.5 / 5.0
Volts
Typical Thermal Resistance (Note 5)
RθJL
10
RθJA
55
Operating and Storage Temperature Range
TJ, TSTG
-65 to + 150
Notes: 1. Non-repetitive Current Pulse Per Fig. 3 and Derated above TA=25OC Per Fig. 2.
/W
OC
2. Mounted on 0.4 x 0.4" (10 x 10mm) Copper Pads to Each Terminal.
3. 8.3ms Single Half Sine-wave or Equivalent Square Wave, Duty Cycle=4 pulses Per Minute
Maximum.
4. VF=3.5V on SMBJ5.0 thru SMBJ90 Devices and VF=5.0V on SMBJ100 thru SMBJ170 Devices.
5. Measured on P.C.B. with 0.27” x 0.27” (7.0mm x 7.0mm) Copper Pad Areas.
Devices for Bipolar Applications
1. For Bidrectional Use C or CA Suffix for Types SMBJ5.0 through Types SMBJ170.
2. Electrical Characteristics Apply in Both Directions.
- 602 -
Free Datasheet http://www.datasheet4u.com/

1 page





PáginasTotal 4 Páginas
PDF Descargar[ Datasheet SMBJ9.0.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
SMBJ9.0TVS Diode ( Rectifier )DEC
DEC
SMBJ9.0TVS Diode, SMD (Transient Voltage Suppressor)Jinan Gude Electronic Device
Jinan Gude Electronic Device
SMBJ9.0SURFACE MOUNT TRANSZORB TRANSIENT VOLTAGE SUPPRESSORGeneral Semiconductor
General Semiconductor
SMBJ9.0Transient Voltage Suppressor 5.0 to 170 Volts 600 WattMicro Commercial Components
Micro Commercial Components

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar