Datasheet.kr   

UC1698U PDF 데이터시트 : 부품 기능 및 핀배열

부품번호 UC1698U
기능 HIGH-VOLTAGE MIXED-SIGNAL IC
제조업체 ULTRACHIP
로고 ULTRACHIP 로고 


전체 30 페이지

		

No Preview Available !

UC1698U 데이터시트, 핀배열, 회로
HIGH-VOLTAGE MIXED-SIGNAL IC
160 x 128RGB C-STN LCD Controller-Driver
w/ 16-bit per RGB On-Chip SRAM
Optimized for VSTN (Video-CSTN)
MP Specifications
Revision 1.21
August 7, 2008
ULTRACHIP
The Coolest LCD Drive, Ever!!
Free Datasheet http://www.datasheet4u.com/




UC1698U pdf, 반도체, 판매, 대치품
ULTRACHIP
High-Voltage Mixed-Signal IC
ORDERING INFORMATION
GOLD BUMPED DIE
Part Number
UC1698uGAC
MTP
Yes
Description
Gold bumped die, with MTP function.
©1999 ~ 2008
General Notes
APPLICATION INFORMATION
For improved readability, the specification contains many application data points. When application information is given, it
is advisory and does not form part of the specification for the device.
BARE DIE DISCLAIMER
All die are tested and are guaranteed to comply with all data sheet limits up to the point of wafer sawing. There is no post
waffle saw/pack testing performed on individual die. Although the latest processes are utilized for wafer sawing and die
pick-&-place into waffle pack carriers, UltraChip has no control of third party procedures in the handling, packing or
assembly of the die. Accordingly, it is the responsibility of the customer to test and qualify their applications in which the
die is to be used. UltraChip assumes no liability for device functionality or performance of the die or systems after
handling, packing or assembly of the die.
MTP LIGHT & ESD SENSITIVITY
The MTP memory cell is sensitive to photon excitation and ESD. Under extended exposure to strong ambient light, or
when TST4 pin is exposed to ESD strikes, the MTP cells can lose its content before the specified memory retention time
span. The system designer is advised to provide proper light & ESD shields to realize full MTP content retention
performance.
LIFE SUPPORT APPLICATIONS
These devices are not designed for use in life support appliances, or systems where malfunction of these products can
reasonably be expected to result in personal injuries. Customer using or selling these products for use in such
applications do so at their own risk.
CONTENT DISCLAIMER
UltraChip believes the information contained in this document to be accurate and reliable. However, it is subject to change
without notice. The information and data provided herein is for reference only. No responsibility is assumed by UltraChip
for the use of information contained in this datasheet. Always contact UltraChip for commit to mass production for the
latest product information and operation parameters.
CONTACT INFORMATION
UltraChip Inc. (Headquarter)
2F, No. 70, Chowtze Street,
Nei Hu District, Taipei 114,
Taiwan, R. O. C.
Tel: +886 (2) 8797-8947
Fax: +886 (2) 8797-8910
Sales e-mail: sales@ultrachip.com
Web site: http://www.ultrachip.com
4 MP Specifications
Free Datasheet http://www.datasheet4u.com/

4페이지










UC1698U 전자부품, 판매, 대치품
UC1698u
160x128RGB CSTN Controller-Driver
Name
BM0
BM1
CS0
CS1
RST
CD
ID0
ID1
WR0
WR1
Type
I
# of Pads
1
1
Description
HOST INTERFACE
Bus mode: The interface bus mode is determined by BM[1:0] and
{DB15, DB13} by the following relationship:
BM[1:0] {DB15, DB13}
Mode
11 Data
6800/16-bit
10 Data
8080/16-bit
01 0x
6800/8-bit
00 0x
8080/8-bit
00
10
4-wire SPI w/ 8-bit token
(S8: conventional)
00
11
3/4-wire SPI w/ 8-bit token
(S8uc: Ultra-Compact)
01
10
3-wire SPI w/ 9-bit taken
(S9: conventional)
I
1 Chip Select. Chip is selected when CS1=”H” and CS0 = “L”. When the
1 chip is not selected, D[15:0] will be high impedance.
When RST=”L”, all control registers are re-initialized by their default
states. Since UC1698u has built-in Power-ON reset and software
I 1 reset commands, RST pin is not required for proper chip operation.
An RC Filter has been included on-chip. There is no need for external
RC noise filter. When RST is not used, connect the pin to VDD.
Selects Control data or Display data for read/write operation. In S9
I 1 mode, CD pin is not used. Connect to VSS when not used.
”L”: Control data
”H”: Display data
ID0 pin can be used for production control.
I1
Connect ID0 pin to VDD for “H” or VSS for “L”.
Selects Input Data set for 8-bit mode.
ID1=0 : 8-bit input data are D[0,2,4,6,8,10,12,14]
ID1=1 : 8-bit input data are D[0:7]
I1
The wiring status of ID pins is available in PID[1:0] with command Get
Status. Other than 8-bit mode, connect ID1 to VDD for “H”, or VSS for
“L”.
WR[1:0] control the read/write operation of the host interface. See
section Host Interface for more detail.
I
1
1 In parallel mode, the meaning of WR[1:0] depends on whether the
interface is in the 6800 mode or the 8080 mode. In serial interface
modes, these two pins are not used, connect them to VSS.
Revision C1.21
7
Free Datasheet http://www.datasheet4u.com/

7페이지



구       성총 30 페이지
다운로드[ UC1698U.PDF 데이터시트 ]
구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

전력 반도체 판매 ( IGBT, TR 모듈, SCR, 다이오드 모듈 )

휴대전화 : 010-3582-2743


상호 : 아이지 인터내셔날

전화번호 : 051-319-2877, [ 홈페이지 ]



링크공유

링크 :

관련 데이터시트

부품번호상세설명 및 기능제조사
UC1698U

HIGH-VOLTAGE MIXED-SIGNAL IC

ULTRACHIP
ULTRACHIP

DataSheet.kr    |   2019   |  연락처   |  링크모음   |   검색  |   사이트맵