Datasheet.kr   

VG2030wm-1 데이터시트 PDF




ViewSonic에서 제조한 전자 부품 VG2030wm-1은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


 

PDF 형식의 VG2030wm-1 자료 제공

부품번호 VG2030wm-1 기능
기능 Color TFT LCD Display
제조업체 ViewSonic
로고 ViewSonic 로고


VG2030wm-1 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.



전체 30 페이지수

미리보기를 사용할 수 없습니다

VG2030wm-1 데이터시트, 핀배열, 회로
Service Manual
ViewSonic VG2030wm-1
Model No. VS11425
20” Color TFT LCD Display
(VG2030wm-1_SM Rev. 1a Nov. 2006)
ViewSonic 381 Brea Canyon Road, Walnut, California 91789 USA - (800) 888-8583
Free Datasheet http://www.datasheet4u.com/




VG2030wm-1 pdf, 반도체, 판매, 대치품
1. Precautions and Safety Notices
1. Appropriate Operation
(1) Turn off the product before cleaning.
(2) Use only a dry soft cloth when cleaning the LCD panel surface.
(3) Use a soft cloth soaked with mild detergent to clean the display housing.
(4) Disconnect the power plug from AC outlet if the product is not used for a long period of
time.
(5) If smoke, abnormal noise, or strange odor is present, immediately switch the LCD display
off.
(6) Do not touch the LCD panel surface with sharp or hard objects.
(7) Do not place heavy objects on the LCD display, video cable, or power cord.
(8) Do not use abrasive cleaners, waxes or solvents for your cleaning.
(9) Do not operate the product under the following conditions:
- Extremely hot, cold or humid environment.
- Areas susceptible to excessive dust and dirt.
- Near any appliance generating a strong magnetic field.
- Place in direct sunlight.
2. Caution
No modification of any circuit should be attempted. Service work should only be performed after
you are thoroughly familiar
with all of the following safety checks and servicing guidelines.
3. Safety Check
Care should be taken while servicing this LCD display. Because of the high voltage used in the
inverter circuit, the voltage is exposed in such areas as the associated transformer circuits.
4. Power Supply Requirements
The external AC power operating range shall be from 90 to 264Vac
5. LCD Module Handling Precautions
5.1. Handling Precautions
(1) Since front polarizer is easily damaged, pay attention not to scratch it.
(2) Be sure to turn off power supply when inserting or disconnecting from input connector.
(3) Wipe off water drop immediately. Long contact with water may cause discoloration or
spots.
(4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
(5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard
surface.
(6) Since CMOS LSI is used in this module, take care of static electricity and insure human
earth when handling.
(7) Do not open nor modify the Module Assembly.
(8) Do not press the reflector sheet at the back of the module to any directions.
(9) In case if a Module has to be put back into the packing container slot after once it was
taken out from the container, do not press the center of the CCFL Reflector edge.
Instead, press at the far ends of the CFL Reflector edge softly. Otherwise the TFT
Module may be damaged.
(10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor
tilt the Interface Connector of the TFT Module.
(11) After installation of the TFT Module into an enclosure (LCD monitor housing, for
example), do not twist nor bend the TFT Module even momentary. At designing the
enclosure, it should be taken into consideration that no bending/twisting forces are
applied to the TFT Module from outside. Otherwise the TFT Module may be damaged.
(12) Cold cathode fluorescent lamp in LCD contains a small amount of mercury. Please
follow local ordinances or regulations for disposal.
(13) Small amount of materials having no flammability grade is used in the LCD module.
The LCD module should be supplied by power complied with requirements of Limited
Power Source (IEC60950 or UL1950), or be applied exemption.
(14) The LCD module is designed so that the CFL in it is supplied by Limited Current
Circuit (IEC60950 or UL1950). Do not connect the CFL in Hazardous Voltage Circuit.
ViewSonic Corporation
1
Confidential - Do Not Copy
VG2030wm-1
Free Datasheet http://www.datasheet4u.com/

4페이지










VG2030wm-1 전자부품, 판매, 대치품
1 GENERAL specification
Test Resolution & Frequency
Test Image Size
Contrast and Brightness Controls
2 VIDEO INTERFACE
Input Connector (refer the Appendix A)
Default Input Connector
Video Cable Strain Relief
Video Cable Connector Pin out
Video Signals
Video Impedance
Maximum PC Video Signal
Maximum Mac Video Signal
Sync Signals
DDC/2B
Sync Compatibility
Video Compatibility
Resolution Compatibility
Exclusions
3 USB INTERFACE
No USB interface
1680x1050 @ 60Hz
Full Size
Factory Default:
Contrast = 70%, Brightness = 100%
Analog = DB-15
Digital = DVI-D
Defaults to the first detected input
Equal to twice the weight of the monitor for five minutes
Refer to Appendix A; Compliant DDC/2B
Video RGB (Analog)
Separate Sync / Composite Sync / SOG
TMDS (Digital)
75 Ohms (Analog), 100 Ohms (Digital)
950 mV with no damage to monitor
1250 mV with no damage to monitor
TTL
Compliant with version 3
Separate Sync / Composite Sync / SOG
Shall be compatible with all PC type computers, Macintosh computers,
and after market video cards
Refer to Segment 5
Not compatible with interlaced video
ViewSonic Corporation
4
Confidential - Do Not Copy
VG2030wm-1
Free Datasheet http://www.datasheet4u.com/

7페이지


구       성 총 30 페이지수
다운로드[ VG2030wm-1.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
VG2030wm-1

Color TFT LCD Display

ViewSonic
ViewSonic

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵