|
|
|
부품번호 | DI-500 기능 |
|
|
기능 | (DI-500 / DI-510) Portable Analog and Digital I/O System | ||
제조업체 | DATAQ | ||
로고 | |||
전체 50 페이지수
The way PC-based instrumentation should be
DI-500/510 Series
Portable Analog and Digital I/O System
DI-750/760 Series
Desktop/Rackmount Analog and Digital I/O System
User's Manual
Manual Revision F
Software Release Level 1
Copyright © 2005 by DATAQ Instruments, Inc. The Information contained herein is the exclusive property of
DATAQ Instruments, Inc., except as otherwise indicated and shall not be reproduced, transmitted, transcribed, stored
in a retrieval system, or translated into any human or computer language, in any form or by any means, electronic,
mechanical, magnetic, optical, chemical, manual, or otherwise without expressed written authorization from the com-
pany. The distribution of this material outside the company may occur only as authorized by the company in writing.
DATAQ Instruments' hardware and software products are not designed to be used in the diagnosis and treatment of
humans, nor are they to be used as critical components in any life-support systems whose failure to perform can rea-
sonably be expected to cause significant injury to humans.
DATAQ, the DATAQ logo, and WINDAQ are registered trademarks of DATAQ Instruments, Inc. All rights reserved.
DATAQ Instruments, Inc.
241 Springside Drive
Akron, Ohio 44333 U.S.A.
Telephone: 330-668-1444
Fax: 330-666-5434
Designed and manufactured in the
United States of America
Free Datasheet http://www.datasheet4u.com/
Free Datasheet http://www.datasheet4u.com/
4페이지 DI-500/510 Series and DI-750/760 Series Hardware Manual
1. Introduction
Congratulations on your purchase of a DI-500/510 or DI-750/760 Series data acquisition/measurement system. These
instruments permit data acquisition on IBM personal computers and compatibles from the Windows environment.
This manual describes how to connect and use the DI-500/510 and DI-750/760 Series instruments. From an opera-
tional point of view, all of the instruments are approximately the same. Throughout the majority of this manual,
enough similarity exists to describe each instrument with the same procedure. The conventions used to describe these
universal applications are “DI-500 Series” (which means that the procedure/information applies equally to the DI-
500-16, DI-500-32, DI-510-32, DI-510-48, DI-510-64, or any of the channel expansion instruments), “DI-750
Series” (applying to the DI-750-16 and DI-750-32) and “DI-760 Series” (applying to the DI-760-32, DI-760-48, and
DI-760-64). In cases where the resemblance is not equal, separate procedures/descriptions exist for each instrument.
Features
The DI-500/510 and DI-750/760 Series offers the following features:
• Complete portability. Connects to the parallel port of any desktop, transportable, notebook, or laptop PC-compat-
ible computer.
• Per channel software-configurable settings: Input gain; Signal Averaging; Input and output measurement range.
• 250kHz burst sampling to minimize channel skew.
• Eight each digital input and output lines.
• A/D subsystem provides 14-bit resolution.
• D/A subsystem provides 14-bit resolution.
• Programmed I/O (PIO) data transfers.
• Signal averaging of up to 32,768 consecutive readings per channel.
Introduction
1
Free Datasheet http://www.datasheet4u.com/
7페이지 | |||
구 성 | 총 50 페이지수 | ||
다운로드 | [ DI-500.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
DI-500 | (DI-500 / DI-510) Portable Analog and Digital I/O System | DATAQ |
DI-505B | LEVEL-SHIFTED GAS DISCHARGE DISPLAY DIGIT DRIVERS | DIONICS |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |