|
|
PDF DI-760 Data sheet ( Hoja de datos )
| Número de pieza | DI-760 | |
| Descripción | (DI-750 / DI-760) Portable Analog and Digital I/O System | |
| Fabricantes | DATAQ | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de DI-760 (archivo pdf) en la parte inferior de esta página. Total 50 Páginas | ||
|
No Preview Available !
The way PC-based instrumentation should be
DI-500/510 Series
Portable Analog and Digital I/O System
DI-750/760 Series
Desktop/Rackmount Analog and Digital I/O System
User's Manual
Manual Revision F
Software Release Level 1
Copyright © 2005 by DATAQ Instruments, Inc. The Information contained herein is the exclusive property of
DATAQ Instruments, Inc., except as otherwise indicated and shall not be reproduced, transmitted, transcribed, stored
in a retrieval system, or translated into any human or computer language, in any form or by any means, electronic,
mechanical, magnetic, optical, chemical, manual, or otherwise without expressed written authorization from the com-
pany. The distribution of this material outside the company may occur only as authorized by the company in writing.
DATAQ Instruments' hardware and software products are not designed to be used in the diagnosis and treatment of
humans, nor are they to be used as critical components in any life-support systems whose failure to perform can rea-
sonably be expected to cause significant injury to humans.
DATAQ, the DATAQ logo, and WINDAQ are registered trademarks of DATAQ Instruments, Inc. All rights reserved.
DATAQ Instruments, Inc.
241 Springside Drive
Akron, Ohio 44333 U.S.A.
Telephone: 330-668-1444
Fax: 330-666-5434
Designed and manufactured in the
United States of America
Free Datasheet http://www.datasheet4u.com/
1 page  
DI-500/510 Series and DI-750/760 Series Hardware Manual
Table of Contents
Warranty and Service Policy ................................................................................................................ iii
1. Introduction ....................................................................................................................................... 1
Features .............................................................................................................................................. 1
2. Specifications ..................................................................................................................................... 3
Signal Connections ............................................................................................................................ 3
Interface Characteristics .................................................................................................................... 3
Analog Channels ................................................................................................................................ 3
All Analog Inputs .............................................................................................................................. 3
High Level Analog Inputs ................................................................................................................. 3
Signal Conditioned Analog Inputs .................................................................................................... 3
Analog Outputs .................................................................................................................................. 4
Digital Input/Output .......................................................................................................................... 4
Input Scan List ................................................................................................................................... 4
Output Scan List ................................................................................................................................ 4
Triggering .......................................................................................................................................... 4
Power Requirements .......................................................................................................................... 4
Physical/Environmental ..................................................................................................................... 4
3. Getting Started ................................................................................................................................... 5
Unpacking .......................................................................................................................................... 5
Connecting the Instrument to your Computer ................................................................................... 5
Applying Power ................................................................................................................................. 6
Connecting Your Signals ................................................................................................................... 6
Analog Inputs .............................................................................................................................. 7
Connecting a Differential Amplifier ........................................................................................... 7
Ground-referenced Signal Sources ............................................................................................. 7
Signal Cable and the Differential Amplifier ............................................................................... 9
Labeling Analog Input Channels ................................................................................................ 9
Increasing the Total Analog Input Channel Capacity ................................................................. 10
The DI-500 Series Instrument ........................................................................................................... 12
ANALOG INPUTS ..................................................................................................................... 12
SIGNAL CONDITIONING MODULE INTERFACE ............................................................... 12
SIGNAL CONDITIONING MODULE CHANNEL REFERENCE .......................................... 13
PRINTER PORT ......................................................................................................................... 13
STATUS LAMPS ....................................................................................................................... 13
POWER SWITCH ...................................................................................................................... 13
POWER INPUT JACK ............................................................................................................... 13
EXPANSION IN and EXPANSION OUT or AUXILIARY PORT and EXPANSION Conns . 13
Installing the Software ....................................................................................................................... 14
4. Enabling Channels for Acquisition ................................................................................................. 15
DI-500-16 and DI-750-16 Instruments Used Alone .......................................................................... 15
All Other DI-500/510 and DI-750/760 Series Instruments ............................................................... 16
DI-500-16 and DI-750-16 Instruments Used with “Slaves” ....................................................... 16
DI-500-32 and DI-750-32 Instruments ....................................................................................... 18
DI-510-32 and DI-760-32 Instruments ....................................................................................... 19
DI-510-48 and DI-760-48 Instruments ....................................................................................... 20
Table of Contents
v
Free Datasheet http://www.datasheet4u.com/
5 Page 
DI-500/510 Series and DI-750/760 Series Hardware Manual
3. Getting Started
Unpacking
The following items are included with a typical DI-500/510 or DI-750/760 Series system. Verify that you have the
following:
• The DI-500/510 or DI-750/760 Series instrument
• Communications cable assembly designed to connect the instrument to your computer's parallel (or printer) port
• Power adapter and power cord
• ActiveX Control Library with built-in documentation
• This Hardware Manual.
If an item is missing or damaged, call DATAQ Instruments at 330-668-1444. We will guide you through the appropri-
ate steps for replacing missing or damaged items. Save the original packing material in the unlikely event that your
unit must, for any reason, be sent back to DATAQ Instruments, Inc.
Connecting the Instrument to your Computer
DI-500/510 and DI-750/760 Series instruments use your computer’s parallel (or printer) port to interface digital and
analog signals to your computer. Installation is as simple as connecting the provided communications cable to your
computer.
1. Plug the appropriate end of the supplied communications cable to the 25-pin female connector labeled PRINTER
PORT on the DI-500/510 or DI-750/760 Series instrument.
2. Connect the other end of the cable to your computer's parallel port.
Getting Started
5
Free Datasheet http://www.datasheet4u.com/
11 Page | ||
| Páginas | Total 50 Páginas | |
| PDF Descargar | [ Datasheet DI-760.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| DI-760 | (DI-750 / DI-760) Portable Analog and Digital I/O System | DATAQ |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |