DataSheet.es    


PDF BT1611I Data sheet ( Hoja de datos )

Número de pieza BT1611I
Descripción AM/FM/CD/MP3/WMA Receiver Manual
Fabricantes Audiovox 
Logotipo Audiovox Logotipo



Hay una vista previa y un enlace de descarga de BT1611I (archivo pdf) en la parte inferior de esta página.


Total 30 Páginas

No Preview Available ! BT1611I Hoja de datos, Descripción, Manual

BT1611i
Owner's Manual
BT1611I MP3/WMA RECEIVER
SUB
RECORD
BASS
INT
AM/FM/CD/MP3/WMA Receiver
with Bluetooth Technology
MENU
/
AUX IN
TUNE

1 page




BT1611I pdf
BT1611i
Removing the Radio
To remove the radio after installation, remove
the trim ring by lifting in the center and pulling it
off from either side. Insert the removal keys
straight back until they lock, and then pull the
radio out. If removal keys are inserted at an
angle, they will not lock properly to release the
unit.
Removal Key
Fuses
When replacing a fuse, make sure the new fuse
is the correct type and amperage. Using an
incorrect fuse could damage the radio. The
BT1611i uses one 15 amp fuse located below
the wiring connector (15 amp fast blow ATO).
5

5 Page





BT1611I arduino
BT1611i
TUNER OPERATION
AM/FM Band Selector (BAND)
Press BAND (5) during radio play to switch
between three FM bands and two AM bands.
“FM1”, “FM2”, “FM3”, “AM1” or “AM2” will
appear in the display to indicate the band
currently selected.
Tuning
Automatic Tuning
Press the Up Tuning >>| (14) button to tune
upward in frequency and the Down Tuning |<<
(13) button to tune downward in frequency. The
unit will automatically stop at the next strong
station. If the Local mode is active, the radio will
seek the next strong local station when either
button is pressed.
Manual Tuning
Press the Up Tuning (14) or Down Tuning (13)
button for more than two seconds to select
manual tuning mode. “Manual Seek” will appear
in the display. Press the Up or Down Tuning
buttons to move radio frequency up or down
two digits at a time. Press and hold the Up or
Down Tuning buttons to quickly advance to a
certain frequency. Release when the desired
frequency is reached. If tuning is not adjusted
within five seconds of entering manual tuning
mode, the radio will revert to automatic tuning
and “AUTO” will appear in the display.
Preset Stations
Up to six stations on each band can be stored
as presets and can then be instantly recalled by
pressing the associated preset button on the
front panel (16) or remote control. To store a
station, turn the radio on and select the desired
band and station. Press and hold the desired
preset button (numbered one through six on the
face of the radio or remote control) for more
than two seconds. When stored, the preset
number will appear in the display. The station is
now stored and can be recalled at any time by
pressing the corresponding preset button.
Repeat for the remaining five presets on the
current band and for all presets on the other
four bands.
Automatically Store / Preset
Scan (AS/PS)
Automatically Store
Select six strong stations and store them in the
current band using the Automatic Store feature.
To enable this feature, press and hold AS/PS
(17) for more than two seconds. The radio will
automatically scan the band in use and enter
strong stations into the preset memory
5 14
BT1611I MP3/WMA RECEIVER
SUB
RECORD
BASS
INT
2 15 17
11
16
MENU
/
AUX IN
TUNE
13

11 Page







PáginasTotal 30 Páginas
PDF Descargar[ Datasheet BT1611I.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
BT1611IAM/FM/CD/MP3/WMA Receiver ManualAudiovox
Audiovox

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar