Datasheet.kr   

HI-201HS 데이터시트 PDF




Intersil Corporation에서 제조한 전자 부품 HI-201HS은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


 

PDF 형식의 HI-201HS 자료 제공

부품번호 HI-201HS 기능
기능 High Speed/ Quad SPST/ CMOS Analog Switch
제조업체 Intersil Corporation
로고 Intersil Corporation 로고


HI-201HS 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.




전체 11 페이지수

미리보기를 사용할 수 없습니다

HI-201HS 데이터시트, 핀배열, 회로
Data Sheet
HI-201HS
July 1999 File Number 3123.2
High Speed, Quad SPST, CMOS Analog
Switch
The HI-201HS is a monolithic CMOS Analog Switch
featuring very fast switching speeds and low ON resistance.
The integrated circuit consists of four independently
selectable SPST switches and is pin compatible with the
industry standard HI-201 switch.
Fabricated using silicon-gate technology and the Intersil
Dielectric Isolation process, this TTL compatible device offers
improved performance over previously available CMOS analog
switches. Featuring maximum switching times of 50ns, low ON
resistance of 50maximum, and a wide analog signal range, the
HI-201HS is designed for any application where improved
switching performance, particularly switching speed, is required.
(A more detailed discussion on the design and application of the
HI-201HS can be found in Application Note AN543.)
Ordering Information
PART NUMBER
HI1-0201HS-2
HI1-0201HS-4
HI1-0201HS-5
HI3-0201HS-5
HI4P0201HS-5
HI9P0201HS-5
HI9P0201HS-9
TEMP.
RANGE (oC)
PACKAGE
-55 to 125 16 Ld CERDIP
-25 to 85 16 Ld CERDIP
0 to 75 16 Ld CERDIP
0 to 75 16 Ld PDIP
0 to 75 20 Ld PLCC
0 to 75 16 Ld SOIC
-40 to 85 16 Ld SOIC
PKG.
NO.
F16.3
F16.3
F16.3
E16.3
N20.35
M16.3
M16.3
Pinouts (Switches Shown For Logic “1” Input)
HI-201HS (CERDIP, PDIP, SOIC)
TOP VIEW
A1 1
OUT1 2
IN1 3
V- 4
GND 5
IN4 6
OUT4 7
A4 8
16 A2
15 OUT2
14 IN2
13 V+
12 NC
11 IN3
10 OUT3
9 A3
Features
• Fast Switching Times
- tON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30ns
- tOFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40ns
• Low “ON” Resistance . . . . . . . . . . . . . . . . . . . . . . . . 30
• Pin Compatible with Standard HI-201
• Wide Analog Voltage Range (±15V Supplies) . . . . . . . ±15V
• Low Charge Injection (±15V Supplies) . . . . . . . . . . 10pC
• TTL Compatible
• Symmetrical Switching Analog Current Range . . . . . 80mA
Applications
• High Speed Multiplexing
• High Frequency Analog Switching
• Sample and Hold Circuits
• Digital Filters
• Operational Amplifier Gain Switching Networks
• Integrator Reset Circuits
HI201HS (PLCC)
TOP VIEW
3 2 1 20 19
IN 1 4
V- 5
6
GND 7
IN 4 8
18 IN 2
17 V+
16
15
14 IN 3
9 10 11 12 13
1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
http://www.intersil.com or 407-727-9207 | Copyright © Intersil Corporation 1999




HI-201HS pdf, 반도체, 판매, 대치품
HI-201HS
Absolute Maximum Ratings
Supply Voltage (V+ to V-). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36V
Digital Input Voltage . . . . . . . . . . . . . . . . . . . . . . (V+) +4V to (V-) -4V
Analog Input Voltage (One Switch) . . . . . . . (V+) +2.0V to (V-) -2.0V
Peak Current, S or D (Pulse 1ms, 10% Duty Cycle Max) . . . . 50mA
Continuous Current Any Terminal (Except S or D) . . . . . . . . . 25mA
Operating Conditions
Temperature Ranges
HI-201HS-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -55oC to 125oC
HI-201HS-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -25oC to 85oC
HI-201HS-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0oC to 75oC
HI-201HS-9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40oC to 85oC
Thermal Information
Thermal Resistance (Typical, Note 1)
θJA (oC/W) θJC (oC/W)
CERDIP Package. . . . . . . . . . . . . . . . .
80
30
PDIP Package . . . . . . . . . . . . . . . . . . .
90
N/A
PLCC Package. . . . . . . . . . . . . . . . . . .
80
N/A
SOIC Package . . . . . . . . . . . . . . . . . . . 100
N/A
Maximum Junction Temperature
Ceramic Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175oC
Plastic Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150oC
Maximum Storage Temperature. . . . . . . . . . . . . . . . -65oC to 150oC
Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . 300oC
(SOIC, PLCC - Lead Tips Only)
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
NOTE:
1. θJA is measured with the component mounted on an evaluation PC board in free air.
Electrical Specifications Supplies = +15V, -15V; VAH (Logic Level High) = 2.4V, VAL (Logic Level Low) = +0.8V, GND = 0V,
Unless Otherwise Specified
PARAMETER
TEST
TEMP
CONDITIONS (oC)
MIN
-2
TYP MAX
-4, -5, -9
MIN TYP MAX
DYNAMIC CHARACTERISTICS
Switch ON Time, tON
Switch OFF Time, tOFF1
Switch OFF Time, tOFF2
Output Settling Time
(Note 3)
(Note 3)
(Note 3)
To 0.1%
25 - 30 50 - 30 50
25 - 40 50 - 40 50
25 - 150 -
- 150 -
25 - 180 -
- 180 -
Charge Injection, Q
(Note 6)
25 - 10 -
- 10 -
OFF Isolation
(Note 4)
25 - 72 -
- 72 -
Crosstalk
(Note 5)
25 - 86 -
- 86 -
Input Switch Capacitance, CS(OFF)
Output Switch Capacitance
CD(OFF)
CD(ON)
Digital Input Capacitance, CA
Drain-To-Source Capacitance, CDS(OFF)
DIGITAL INPUT CHARACTERISTICS
25 - 10 -
25 - 10 -
25 - 30 -
25 - 18 -
25 - 0.5 -
- 10 -
- 10 -
- 30 -
- 18 -
- 0.5 -
Input Low Threshold, VAL
Input High Threshold, VAH
Full -
- 0.8 -
- 0.8
25 2.0
-
- 2.0 -
-
Full 2.4
-
- 2.4 -
-
Input Leakage Current (Low), IAL
25 - 200 -
- 200 -
Full -
- 500 -
- 500
Input Leakage Current (High), IAH
VAH = 4.0V 25 - 20 -
- 20 -
Full -
- 40 -
- 40
ANALOG SWITCH CHARACTERISTICS
Analog Signal Range, VS
ON Resistance, rON
(Note 2)
Full -15 - +15 -15 - +15
25 - 30 50 - 30 50
Full -
- 75 -
- 75
UNITS
ns
ns
ns
ns
pC
dB
dB
pF
pF
pF
pF
pF
V
V
V
µA
µA
µA
µA
V
4

4페이지










HI-201HS 전자부품, 판매, 대치품
HI-201HS
Test Circuits and Waveforms (Continued)
00
-5 -5
-10
tO tO
FIGURE 2E. VIN = -5V
FIGURE 2F. VIN = -10V
FIGURE 2. SWITCHING WAVEFORMS FOR VARIOUS ANALOG INPUT VOLTAGES
Application Information
Logic Compatibility
The HI-201HS is TTL compatible. Its logic inputs (pins 1, 8,
9, and 16) are designed to react to digital inputs which
exceed a fixed, internally generated TTL switching threshold.
The HI-201HS can also be driven with CMOS logic (0V-
15V), although the switch performance with CMOS logic will
be inferior to that with TTL logic (0V-5V).
The logic input design of the HI-201HS is largely responsible
for its fast switching speed. It is a design which features a
unique input stage consisting of complementary vertical
PNP and NPN bipolar transistors. This design differs from
that of the standard HI-201 product where the logic inputs
are MOS transistors.
Although the new logic design enhances the switching
speed performance, it also increases the logic input leakage
currents. Therefore, the HI-201HS will exhibit larger digital
input leakage currents in comparison to the standard HI-201
product.
Charge Injection
Charge injection is the charge transferred, through the
internal gate-to-channel capacitances, from the digital logic
input to the analog output. To optimize charge injection
performance for the HI-201HS, it is advisable to provide a
TTL logic input with fast rise and fall times.
If the power supplies are reduced from ±15V, charge
injection will become increasingly dependent upon the digital
input frequency. Increased logic input frequency will result in
larger output error due to charge injection.
Power Supply Considerations
The electrical characteristics specified in this data sheet are
guaranteed for power supplies VS = ±15V. Power supply
voltages less than ±15V will result in reduced switch
performance. The following information is intended as a
design aid only.
POWER SUPPLY
VOLTAGES
±12 VS ≤ ±15V
VS < ±12V
VS < ±10V
VS > ±16V
SWITCH PERFORMANCE
Minimal Variation
Parametric variation becomes
increasingly large (increased ON
resistance, longer switching times).
Not Recommended.
Not Recommended.
Single Supply
The switch operation of the HI-201HS is dependent upon an
internally generated switching threshold voltage optimized
for ±15V power supplies. The HI-201HS does not provide
the necessary internal switching threshold in a single supply
system. Therefore, if single supply operation is required, the
HI-300 series of switches is recommended. The HI-300
series will remain operational to a minimum +5V single
supply.
Switch performance will degrade as power supply voltage is
reduced from optimum levels (±15V). So it is recommended
that a single supply design be thoroughly evaluated to
ensure that the switch will meet the requirements of the
application.
For further information see Application Notes AN520,
AN521, AN531, AN532, AN543 and AN557.
7

7페이지


구       성 총 11 페이지수
다운로드[ HI-201HS.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
HI-201HS

High Speed/ Quad SPST/ CMOS Analog Switch

Intersil Corporation
Intersil Corporation
HI-201HS

High-Speed/ CMOS/ Quad/ SPST Analog Switch

Maxim Integrated Products
Maxim Integrated Products

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵