|
|
Número de pieza | MK7A25P | |
Descripción | 8-Bit Microcontroller | |
Fabricantes | Mikkon | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de MK7A25P (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
No Preview Available ! MK7A25P
8Bit Microcontroller with 10bit ADC
General Description
The MK7A25P is an 8 bit RISC high performance microcontroller with 10bit A/D converter. It is equipped
with 2K word OTP(One Time Programmable) ROM, 128 Bytes RAM, Timer/Counter, Capture, Interrupt,
LVR(Low Voltage Reset), I/O ports and PWM output in a single chip.
1. Feature
z ROM size: 2K x 16 bits
z RAM: 37 x 8 bits(Special Purpose Register)
+ 128 x 8 (General Purpose Register)
z STACK: 8 Levels
z One instruction build by two systems clock.
z Reset mode:
(a) Power-On reset
(b) Low voltage reset
(c) RESETB/PC1 (if be set as reset pin) input
a negative pulse.
(d) Watchdog timer count overflow reset
z Dual Clock Mode
- External RC or Crystal oscillator
- Internal 4MHz RC oscillator
z Timer/counter: 3 units.
- TM1: 16-bit, capture & Timer.
- TM2: 8-bit, PWM (period) & Timer.
- TM3: 8-bit, PWM (duty) & Timer.
- TO : TM2(PWM) clock out
z Watchdog Timer: On chip WDT is based on
an internal RC oscillator (for WDT used
only). Have 8 period can be selected. User
can extend the WDT overflow period by
using prescaler.
z Interrupt events:
(a) External interrupt (PA7~PA0).
(b) Internal timer/event counter interrupt
(TM1~TM3).
(c) ADC end of conversion interrupt
z I/O port: 16 pins
z PWM: one channel
z ADC: max 10(6+4)-bit and 4 channels, at least
10-bit resolution. It can use at converter mode
or compare mode
z Wake-up mode:
1. Port A (PA7~PA0) pin change wakeup
2. i_WDT wakeup
z Different Package Type:
MK7A25PD20C: 20 pin DIP
MK7A25PS20C: 20 pin SOP
MK7A25PD18C: 18 pin DIP
MK7A25PS18C: 18 pin SOP
MK7A25PD14C: 14 pin DIP
MK7A25PS14C: 14 pin SOP
Free Datasheet http://www.Datasheet4U.com
1 page 4.1 PIN Circuit
MK7A25P
Output disable
(input mode)
Analog enable
Data
Pull-high enable
Analog enable
VDD
VDD
Long channel
I/O
Digital input
Analog enable
Analog input
Pin circuit Type A
in
Pin circuit Type B
5 2010/09/13 Rev.06
Free Datasheet http://www.Datasheet4U.com
5 Page MK7A25P
z Bit2~0 (INRC, FOSC1~0): OSC type and system clock select
Bit2
INRC
Bit1
FOSC1
Bit0
FOSC0
OSC Type
Resonance Frequency
0
0
0 LS (low speed)
System clock=32~200KHz
0 0 1 NS (Normal speed) System clock=200K~10MHz
0
1
0 HS (high speed)
System clock=10~20MHz
0 1 1 External RC
System clock=32K ~ 10MHz
1. Dual clock mode LS & 4MHz
1 0 0 LS &Internal RC
2. Initial system clock=4MHz
1. Dual clock mode NS & 4MHz
1 0 1 NS &Internal RC
2. Initial system clock=4MHz
1. Dual clock mode HS & 4MHz
1 1 0 HS & Internal RC
2. Initial system clock=4MHz
1 1 1 Internal RC
1. System clock=4MHz
2. OSC1 & OSC2 work as I/O ports
6. Function Descriptions
This device provide many functions that are Timer, WDT, PWM, ADC, Capture, Interrupt, Table location, Reset,
Program Counter and STATUS register. We would like to describe in detail.
6.1 I/O Port
There are 3 I/O ports to input or output data, each port has different function. The port A can be external
interrupt, EXT_CLK clock input or capture input by register option. The port B can be analog input of ADC
function. The port C can be external RC oscillator input, system reset input (reset function) or output of PWM
function.
6.1.1 Port A
There are 3 registers to set the 8 I/O ports which are PA_DIR, PA_DAT, PA_PLU. Each pin of Port A can be
external interrupt input or normal I/O. To know how to set these pins as external interrupt, please refer to
Chapter 6.7. Pin PA4 has multiple functions. User should define it at Configure Register bit 8 at first.
A. PA_DIR($05H):
Register
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
PA_DIR
IOA7
IOA6 IOA5 IOA4 IOA3 IOA2 IOA1 IOA0
z Bit7~0 (IOA7~0): To define each pin is input port or output port
0: Output.
1: Input.
11
2010/09/13 Rev.06
Free Datasheet http://www.Datasheet4U.com
11 Page |
Páginas | Total 30 Páginas | |
PDF Descargar | [ Datasheet MK7A25P.PDF ] |
Número de pieza | Descripción | Fabricantes |
MK7A25P | 8-Bit Microcontroller | Mikkon |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |