|
|
|
부품번호 | MS21042 기능 |
|
|
기능 | Nuts | ||
제조업체 | Coast Fabrication | ||
로고 | |||
전체 1 페이지수
MS21042 / NAS1291 Series Specifications
Nuts, Self-locking, 450°, Reduced Hexagon, Reduced
Height, Ring Base, Non-Corrosion Resistant Steel
35
Size
Dash
No.
Thread a
ABC
D Ed Fe
Max Min Min Max Min Min Min
02 2-56 UNC-3B .167 .137 .138 .106 .086 .045 .019
04 4-40 UNC-3B .206 .176 .171 .142 .112 .050 .028
06 6-32 UNC-3B .244 .214 .207 .168 .138 .055 .039
08 8-32 UNC-3B .290 .260 .244 .194 .164 .060 .041
3 10-32 UNF-3B .330 .290 .277 .220 .190 .065 .043
4 1/4-28 UNF-3B .420 .386 .347 .280 .250 .090 .057
5 5/16-24 UNF-3B .520 .482 .419 .342 .312 .120 .077
6 3/8-24 UNF-3B .620 .575 .491 .405 .375 .125 .089
7 7/16-20 UNF-3B .708 .680 .562 .467 .437 .160 -
8 1/2-20 UNF-3B .814 .786 .633 .530 .500 .225 -
9 9/16-18 UNF-3B .912 .874 .775 .592 .562 .320 -
10 5/8-18 UNF-3B 1.014 .976 .846 .655 .625 .365 -
G
Max Min
.021 .004
.027 .005
.031 .006
.031 .006
.031 .006
.036 .007
.042 .008
.042 .008
--
--
--
--
H
Max Min
.100 .080
.125 .103
.141 .115
.188 .125
.188 .154
.219 .204
.266 .251
.282 .267
.328 .313
.410 .350
.480 .420
.550 .490
J Wc
Min Max Min
Xb
Axial f
Strength
Min, lb
Weight
lb/100
Max
.010 .127 .122 .0025
.010 .158 .150 .003
.010 .190 .181 .003
.015 .221 .213 .003
.015 .252 .243 .003
.019 .316 .304 .003
.023 .378 .367 .004
.030 .440 .430 .004
.035 .504 .494 .004
.040 .566 .556 .004
.045 .692 .680 .004
.050 .755 .743 .004
660
1110
1670
2490
3470
6200
9820
15200
20600
27500
34800
43600
.020
.050
.080
.150
.180
.350
.600
.800
1.30
2.10
3.60
4.50
Wrenching
Torque Test f
Value, in-lb
5
10
20
30
60
150
330
530
825
1125
1550
2000
All dimensions in inches; nuts dash size 7 and larger use NAS1291 prefix, stainless steel nuts use NAS1291C designation.
(a) Threads in accordance with MIL-S-7742 before lubrication
(b) Bearing surface shall be square with pitch diameter within X when measured in accordance with MIL-N-25027
(c) Dimension across flats includes deformation of locking device
(d) Minimum length of each wrenching corner
(e) Minimum distance from the washer face of the nut to the beginning of the minimum length E of each wrenching corner
(f) For alloy steel nuts. For A286 nuts multiply these values by .694
Material: Alloy steel or A286 corrosion resistant steel (NAS1291C designation)
Plating: Plain cadmium-plated nuts in accordance with QQ-P-416, Type II, Class 3. Dry film lubricated nuts in accordance with QQ-P-416. NAS1291C designation
nuts: silver plate per AMS2410
Lubricant: Dry film lubricant approved in accordance with MIL-N-25027. Other lubricants soluble in the cleaner specified in procurement specification. For USAF ap-
plications, nuts treated with dry film lubricants shall not be utilized in integral fuel tanks.
Hardness: Rockwell C49 maximum (alloy steel nuts)
Break all sharp edges and remove all hanging burrs and slivers which might become dislodged under usage. Surface roughness in accordance with MIL-STD-10.
Unless otherwise specified the surface roughness shall not exceed 125 uin. These nuts shall be used in accordance with the limitations of MS33588.
Coast Fabrication, Inc. Ph: (714) 842-2603 Fax: (714)847-1824 [email protected]
Free Datasheet http://www.Datasheet4U.com
| |||
구 성 | 총 1 페이지수 | ||
다운로드 | [ MS21042.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
MS21042 | (MS210xx) Nut | Aviaquip |
MS21042 | MS21042 | Military Specification |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |