Datasheet.kr   

DNX4230BT 데이터시트 PDF




Kenwood에서 제조한 전자 부품 DNX4230BT은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 DNX4230BT 자료 제공

부품번호 DNX4230BT 기능
기능 GPS NAVIGATION SYSTEM INSTRUCTION MANUAL
제조업체 Kenwood
로고 Kenwood 로고


DNX4230BT 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.



전체 63 페이지수

미리보기를 사용할 수 없습니다

DNX4230BT 데이터시트, 핀배열, 회로
DNX7230DAB
DNX5230DAB
DNX5230BT
DNX4230DAB
DNX4230BT
GPS NAVIGATION SYSTEM
INSTRUCTION MANUAL
Before reading this manual, click the button below to check the latest edition and the
modified pages.
Check the latest edition
What Do You Want To Do?
Thank you for purchasing the KENWOOD GPS NAVIGATION SYSTEM.
In this manual, you will learn various convenient functions of the system.
Click the icon of the media you want to play.
With one-click, you can jump to the section of each media!
iPod USB VCD
Tuner DAB
Disc Media Music CD DVD VIDEO
BT Audio SD card aha
© 2012 JVC KENWOOD Corporation
13DNX_IM366_Ref_E_En_01 (E)




DNX4230BT pdf, 반도체, 판매, 대치품
Return to the Top page
Basic Operations
Basic Operations
Functions of the Buttons on the Front Panel
DNX7230DAB
10
11
12 3 4
5 6 789
NOTE
• The panels shown in this guide are examples used to provide clear explanations of the operations. For this reason,
they may be different from the actual panels.
• In this manual, each model name is abbreviated as follows.
DNX7230DAB:
If above icon is showed, read the article applicable to the unit you use.
How to insert an SD Card
1) Press 8 <0> button for 1 second.
The panel fully opens.
2) Hold the SD card as the illustration in the right
and insert it into the slot until it clicks.
To eject the card:
Push the card until it clicks and then remove your finger
from the card.
The card pops up so that you can pull it out with your
fingers.
Labelled
side
0
6
Return to the Top page
Basic Operations
Number Name
1 (Reset)
2 ATT
3 , 5 (Vol)
4 AUD
5 NAV
6 MENU
7 TEL
8 0 (Eject)
9
Remote
Sensor
10
Disc insert
slot
11 SD card slot
Motion
• If the unit or the connected unit fails to operate properly, the unit
returns to factory settings when this button is pressed (P.109).
• If the Security Indicator (SI) function is turned on, this indicator flashes
when the vehicle ignition is off (P.80).
• Switches attenuation of the volume on/off.
• Pressing for 1 second turns the screen off.
Adjusts volume.
• Displays Graphic Equalizer screen (P.95).*
• Pressing for 1 second switches camera view display on/off.
• Displays the navigation screen.
• Pressing for 1 second switches AV out sources.
• Displays the Top Menu screen (P.19).
• Pressing for 1 second turns the power off.
• When the power off, turns the power on.
• Displays the Hands Free screen (P.64).
• Pressing for 1 second displays the Voice Recognition screen. (P.72)
• Ejects the disc.
• When the panel is opened, pressing closes the panel and pressing for 1
second ejects the disc forcibly.
• When the panel is closed, pressing for 1 second fully opens the panel to
the location of the SD card slot.
Receives the remote control signal.
A slot to insert a disc media.
A slot to insert an SD card. The card is used for upgrading the map.
For how to upgrade the map, refer to the instruction manual of the
navigation system.
Also, you can play audio/visual file in the card.
* The display may not switch to the Graphic Equalizer screen in some conditions.
7

4페이지










DNX4230BT 전자부품, 판매, 대치품
Return to the Top page
Basic Operations
Turning on the Unit
The method of turning on is different depending on the model.
1 Press the <MENU> button.
The unit is turned on.
●●To turn off the unit:
Press the <MENU> button for 1 second.
If it is your first time turning the unit on after installation, it will be necessary to perform
Initial setup (P.13).
12
Return to the Top page
Basic Operations
Initial setup
Perform this setup when you use this unit first time or when you reset the unit (P.109).
1 Set each item as follows.
Language
Select the language used for the control screen and setting items. Default is “British English (en)”.
1 Touch [SET].
2 Touch [2] or [3] to select the desired language.
3 Touch [Enter].
For detailed operation, see Language setup (P.79).
Angle
Adjust the position of the monitor. Default is “0”.
1 Touch [SET].
2 Touch desired angle number and [ ].
For detailed operation, see Monitor angle control (P.82).
iPod AV Interface Use
Set the terminal which your iPod is connected to. Default is “iPod”.
1 Touch [iPod] or [AV-IN2].
Color
Set the screen and button illumination color. You can select whether to allow color scan operation or
select a fixed color for operation.
1 Touch [SET].
2 Touch [ON] or [OFF] of [Panel Color Scan].
3 If you want to change color, touch [SET] of [Panel Color Coordinate].
4 Touch your desired color and [ ].
For detailed operation, see Panel color coordinate (P.83).
Camera
Set the parameters for the camera.
1 Touch [SET].
2 Set each item and touch [ ].
For detailed operation, see Camera Setup (P.86).
Continued
13

7페이지


구       성 총 63 페이지수
다운로드[ DNX4230BT.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
DNX4230BT

GPS NAVIGATION SYSTEM INSTRUCTION MANUAL

Kenwood
Kenwood
DNX4230BT

GPS NAVIGATION SYSTEM Quick Start Guide

Kenwood
Kenwood

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵