|
|
PDF MKT470 Data sheet ( Hoja de datos )
| Número de pieza | MKT470 | |
| Descripción | Metallized Polyester Film Capacitors | |
| Fabricantes | Vishay | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de MKT470 (archivo pdf) en la parte inferior de esta página. Total 14 Páginas | ||
|
No Preview Available !
MKT470
Vishay BCcomponents
Metallized Polyester Film Capacitors
MKT Radial Potted Type
168x12(halfpage)
l
w
h
lt
P±0.3
Dimensions in
Ødt
APPLICATIONS
Blocking, coupling and decoupling. Bypass and energy
reservoir
MARKING
C-value; tolerance; rated voltage; year and week
of manufacturer; manufacturer’s type designation,
manufacturers logo or name, location
DIELECTRIC
Polyester film
FEATURES
Pitch 5 mm available loose in box, ammopack and
taped on reel.
• Material categorization:
For definitions of compliance please see
www.vishay.com/doc?99912
CAPACITANCE RANGE (E12 SERIES)
0.001 µF to 1.2 µF
RATED (DC) VOLTAGE
63 V; 100 V; 250 V; 400 V
RATED (AC) VOLTAGE
40 V; 63 V; 160 V; 200 V
CLIMATIC CATEGORY
55/125/56
RATED TEMPERATURE
85 C
MAXIMUM APPLICATION TEMPERATURE
125 °C
ELECTRODES
Vacuum deposited aluminum
REFERENCE SPECIFICATIONS
IEC 60384-2
ENCAPSULATION
Flame retardant plastic case and epoxy resin
(UL-class 94 V-0)
CONSTRUCTION
Wound mono construction
PERFORMANCE GRADE
Grade 1 (long life)
DETAIL SPECIFICATION
For more detailed data and test requirements contact:
LEADS
Tinned wire
CAPACITANCE TOLERANCE
± 10 %; ± 5 %
Document Number: 28112
Revision: 07-Mar-14
For technical questions, contact: [email protected]
www.vishay.com
1
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Free Datasheet http://www.Datasheet4U.com
1 page  
Metallized Polyester Film Capacitors
MKT Radial Potted Type
MKT470
Vishay BCcomponents
MOUNTING
Normal Use
The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for
mounting in printed-circuit boards by means of automatic insertion machines.
For detailed tape specifications refer to: “Packaging Information”: www.vishay.com/doc?28139
Specific Method of Mounting to Withstand Vibration and Shock
In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the
printed-circuit board:
• For pitches 15 mm capacitors shall be mechanically fixed by the leads
• For larger pitches the capacitors shall be mounted in the same way and the body clamped
Space Requirements on Printed-Circuit Board
The maximum space for length (Imax.), width (wmax.) and height (hmax.) of film capacitors to take in account on the printed circuit
board is shown in the drawings.
For products with pitch 15 mm, w = l = 0.3 mm and h = 0.1 mm
Eccentricity defined as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product
concerned.
Eccentricity
wmax. = W + Δ
Imax. = I + Δ
CBA116
hmax. = h + Δ
Seating plane
SOLDERING
For general soldering conditions and wave soldering profile, we refer to the application note:
“Soldering Guidelines for Film Capacitors”: www.vishay.com/doc?28171
Storage Temperature
Storage temperature: Tstg = - 25 °C to + 40 °C with RH maximum 80 % without condensation
Ratings and Characteristics Reference Conditions
Unless otherwise specified, all electrical values apply to an ambient temperature of 23 °C ± 1 °C, an atmospheric pressure of
86 kPa to 106 kPa and a relative humidity of 50 % ± 2 %.
For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at
the rated temperature and a relative humidity not exceeding 20 %.
Document Number: 28112
Revision: 07-Mar-14
For technical questions, contact: [email protected]
www.vishay.com
5
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Free Datasheet http://www.Datasheet4U.com
5 Page 
Metallized Polyester Film Capacitors
MKT Radial Potted Type
MKT470
Vishay BCcomponents
INSPECTION REQUIREMENTS
General Notes:
Sub-clause numbers of tests and performance requirements refer to the “Sectional Specification, Publication IEC 60384-2 and
Specific Reference Data”.
Group C Inspection Requirements
SUB-CLAUSE NUMBER AND TEST
SUB-GROUP C1A PART OF SAMPLE
OF SUB-GROUP C1
4.1 Dimensions (detail)
4.3.1 Initial measurements
4.3 Robustness of terminations
4.4 Resistance to soldering heat
4.14 Component solvent resistance
4.4.2 Final measurements
SUB-GROUP C1B PART OF SAMPLE
OF SUB-GROUP C1
4.6.1 Initial measurements
4.6 Rapid change of temperature
4.7 Vibration
4.7.2 Final inspection
CONDITIONS
PERFORMANCE REQUIREMENTS
Capacitance
Tangent of loss angle for:
C 10 nF at 1 MHz
10 nF < C 470 nF at 100 kHz
C > 470 nF at 10 kHz
Tensile: Load 10 N; 10 s
Bending: Load 5 N; 4 x 90°
Method: 1A
Solder bath: 280 °C ± 5 °C
Duration: 10 s
Isopropylalcohol at room temperature
Method: 2
Immersion time: 5 min ± 0.5 min
Recovery time: Min. 1 h, max. 2 h
Visual examination
Capacitance
Tangent of loss angle
As specified in chapters “General Data” of this
specification
No visible damage
No visible damage
Legible marking
C/C| 2 % of the value measured initially
Increase of tan
0.005 for: C 10 nF or
0.003 for: 10 nF < C 470 nF or
0.002 for: C > 470 nF
Compared to values measured in 4.3.1
Capacitance
Tangent of loss angle for:
C 10 nF at 1 MHz
10 nF < C 470 nF at 100 kHz
C > 470 nF at 10 kHz
A = - 55 °C
B = + 125 °C
5 cycles
Duration t = 30 min
Visual examination
Mounting:
See section “Mounting” of this specification
Procedure B4
Frequency range: 10 Hz to 55 Hz
Amplitude: 0.75 mm or
Acceleration 98 m/s²
(whichever is less severe)
Total duration 6 h
Visual examination
No visible damage
No visible damage
Document Number: 28112
Revision: 07-Mar-14
For technical questions, contact: [email protected]
www.vishay.com
11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Free Datasheet http://www.Datasheet4U.com
11 Page | ||
| Páginas | Total 14 Páginas | |
| PDF Descargar | [ Datasheet MKT470.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| MKT470 | Metallized Polyester Film Capacitors | Vishay |
| MKT470 | Metallized polyester Film capacitors |  BC Components |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |