|
|
|
부품번호 | ATR28XXD 기능 |
|
|
기능 | HYBRID - HIGH RELIABILITY DC-DC CONVERTER | ||
제조업체 | IRF | ||
로고 | |||
PD-94550B
HYBRID - HIGH RELIABILITY
DC-DC CONVERTER
ATR28XXD SERIES
28V Input, Dual Output
Description
The ATR28XXD Series of DC-DC converters feature
high power density and an extended temperature range
for use in military and industrial applications. Designed
to MIL-STD-704D input requirements, these devices
have nominal 28VDC inputs with ±12V and ±15V dual
outputs to satisfy a wide range of requirements. The
circuit design incorporates a pulse width modulated
single forward topology operating in the feed-forward
mode at a nominal switching frequency of 550KHz.
Input to output isolation is achieved through the use of
transformers in the forward and feedback circuits.
The advanced feedback design provides fast loop
response for superior line and load transient characteristics
and offers greater reliability and radiation tolerance
than devices incorporating optical feedback circuits.
Three standard temperature grades are offered with
screening options. Refer to Part Number section. They
can be provided in a standard plug-in package for PC
mounting or in a flanged package for more severe
environments.
Manufactured in a facility fully qualified to MIL-PRF-
38534, these converters are fabricated utilizing DLA
and Land Maritime qualified processes. For available
screening options, refer to device screening table in
the data sheet. Variations in electrical, mechanical
and screening can be accommodated.
ATR
Features
n 16V to 40VDC Input Range (28VDC Nominal)
n ±12V and ±15V Outputs Available
n Indefinite Short Circuit and Overload Protection
n 35W/in3 Power Density
n 30W Output Power
n Fast Loop Response for Superior Transient
Characteristics
n Operating Temperature Range from
-55°C to +125°C
n Popular Industry Standard Pin-Out
n Resistance Seam Welded Case for Superior
Long Term Hermeticity
n Ceramic Feed-thru Pins
n External Synchronization
n High Efficiency
n Shutdown from External Signal
n Military Screening
n Standard Microcircuit Drawings Available
Extensive computer simulation using complex modeling
enables rapid design modification to be provided.
Contact IR San Jose with specific requirements.
www.irf.com
1
07/07/11
http://www.Datasheet4U.com
ATR28XXD Series
Specifications
TCASE = -55°C to +125°C, VIN = +28V ± 5% unless otherwise specified
Absolute Maximum Ratings
Input voltage
-0.5V to +50VDC
Power Output
Internally limited, 36W typical
Soldering temperature
300°C for 10 seconds
Temperature Range1
Recommended Operating temperature
Maximum Operating temperature
Storage case temperature
-55°C to +125°C
-55°C to +135°C
-65°C to +135°C
PARAMETER
Condition
-55°C ≤ TC ≤ +125°C, VIN = 28 VDC
±5%, CL=0, unless otherwise
specified
ATR2812D/HB
Min Typ Max
ATR2815D/HB
Min Typ Max
Units
STATIC CHARACTERISTICS
OUTPUT
Voltage
Current 5
Ripple
Accuracy
Power1
REGULATION
Line4
Load4
CROSS REGULATION6
INPUT
Voltage Range
Current
Ripple Current
EFFICIENCY
ISOLATION
CAPACITIVE LOAD
Load Fault Power Dissipation
Switching Frequency
SYNC Frequency Range7
DYNAMIC CHARACTERISTICS
Step Load Changes
Output4
Transient
Recovery 2
Step Line Changes
Output
Transient
Recovery 2
TURN-ON
Overshoot
Delay3
Load Fault Recovery
VIN = 16 to 40 VDC
IOUT = 0 to Full Load
Full Load, 20KHz to 2MHz
TCASE = 25°C, Full Load
VIN = 16 to 40 VDC
IOUT = 0 to Full Load
VIN = 16, 28, and 40 VDC
No Load, pin 2 = open
Inhibited, pin 2 tied to pin 10
Full Load
Full Load TC = +25°C
Input to output @500 VDC
No effect on performance
TC = +25°C (total for both outputs)
Short Circuit
Overload, TC = +25°C
IOUT = Full Load
±11.76
0.0
±11.88
30
16
80
100
500
500
±12.00
40
±12.00
28
25
82
±12.24
±1.25
85
±12.12
75
120
±5
40
75
18
50
100
9.0
14
600
700
±14.70
0.0
±14.85
30
16
79
100
500
500
±15
40
±15.00
28
18
25
82
±15.30
±1.0
85
±15.15
75
150
±5
40
75
18
50
100
9.0
14
600
700
VDC
ADC
mV p-p
VDC
W
mV
mV
%
VDC
mADC
mADC
mA p-p
%
MΩ
µF
W
W
KHz
KHz
50% Load to 100% Load
No Load to 50% Load
50% Load to 100% Load
No Load to 50% Load
50% Load to No Load
Input step 16 to 40 VDC
Input step 40 to 16 VDC
Input step 16 to 40 VDC
Input step 40 to 16 VDC
VIN = 16 to 40 VDC
IOUT = O to Full Load
VIN = 16 to 40 VDC
±100
±250
25
500
3.0
±180
-600
5.0
5.0
0.0
14
14
±450
±760
70
1500
5.0
1200
-1500
10
10
600
25
25
±100
±250
25
500
3.0
±180
-600
5.0
5.0
0.0
14
14
±450
±750
70
1500
5.0
1500
-1500
10
10
600
25
25
mVpk
mVpk
µs
µs
ms
mVpk
mVpk
ms
ms
mVpk
ms
ms
Notes to Specifications
1. Above +125°C case temperature, derate output power linearly to 0 at +135°C case.
2.
3.
Recovery time is measured from the initiation
Turn-on delay time measurement is for either
of
an
the input transient to
application of power
awthtehreeinVpOuUtT
has
or a
returned
signal at
to within ±1%
the inhibit pin.
of
VOUT
at
50%
load.
4. Load current split equally between +VOUT and –VOUT.
5. Up to 90% of Full Power is available from either output provided. The total power output does not exceed 30W.
6. 3W load on output under test, 3W to 27W on other output.
7. Sync. Input signal: VIL = -0.5V Min, 0.8V Max and VIN = 2.5V Min, 11.5V Max for 10% to 90% duty cycle.
4 www.irf.com
http://www.Datasheet4U.com
4페이지 Mechanical Outlines
ATR28XXD Series
Pin Designation
Pin #
1
2
3
4
5
6
7
8
9
10
Designation
+ Input
Inhibit Input
+ Output
Output Return
- Output
NC
NC
Case Ground
Sync.
Input Return
Standard Microcircuit Drawing Equivalence Table
Standard Microcircuit
Drawing Number
5962-94627
5962-94628
Vendor Cage
Code
52467
52467
IR Standard
Part Number
ATR2812D
ATR2815D
www.irf.com
7
http://www.Datasheet4U.com
7페이지 | |||
구 성 | 총 8 페이지수 | ||
다운로드 | [ ATR28XXD.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
ATR28XXD | HYBRID - HIGH RELIABILITY DC-DC CONVERTER | IRF |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |