![]() |
|
Número de pieza | BA2901SF | |
Descripción | Ground Sense Comparator | |
Fabricantes | ROHM Semiconductor | |
Logotipo | ![]() |
|
Hay una vista previa y un enlace de descarga de BA2901SF (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
No Preview Available !
Datasheet
Comparators
Ground Sense Comparator
BA8391G BA10393F BA10339xx
BA2903xxx BA2903Sxxx BA2903Wxx BA2901xx BA2901Sxx
General Description
General purpose BA8391G/BA10393F/BA10339xx
and high reliability BA2903xxxx/BA2901xxx integrate
one, two or four independent high gain voltage
comparator. Some features are the wide operating
voltage that is 2V to 36V (for BA8391G/BA10393F/
BA2903xxxx/BA2901xxx) 3V to 36V (for BA10339xx)
and low supply current. Therefore, this series is
suitable for any application.
Features
Operable with a Single Power Supply
Wide Operating Supply Voltage
Standard Comparator Pin Assignments
Input and Output are Ground Sense Operated
Open Collector
Wide Temperature Range
Application
General Purpose
Current Monitor
Battery Monitor
Multivibrators
Key Specifications
Wide Operating Supply Voltage(Single Supply):
BA8391G/BA10393F
+2.0V to +36.0V
BA2903xxx/BA2901xxxx
+2.0V to +36.0V
BA10339xx
+3.0V to +36.0V
Wide Operating Supply Voltage(Split Supply):
BA8391G/BA10393F
±1.0V to ±18.0V
BA2903xxxx/BA2901xxx
±1.0V to ±18.0V
BA10339xx
±1.5V to ±18.0V
Wide Temperature Range:
BA8391G/BA10393F/BA10339xx -40°C to +85°C
BA2903Sxxx/BA2901Sxx
-40°C to +105°C
BA2903xxx/BA2901xx
-40°C to +125°C
Input Offset Voltage:
BA2903Sxxx/BA2901Sxx
7mV(Max)
BA8391G/BA2903xxx/BA2901xx
7mV(Max)
BA10393F/BA10339xx
5mV(Max)
BA2903Wxx
2mV(Max)
Packages
SSOP5
SOP8
SSOP-B8
MSOP8
SOP14
SSOP-B14
W(Typ) x D(Typ) x H(Max)
2.90mm x 2.80mm x 1.25mm
5.00mm x 6.20mm x 1.71mm
3.00mm x 6.40mm x 1.35mm
2.90mm x 4.00mm x 0.90mm
8.70mm x 6.20mm x 1.71mm
5.00mm x 6.40mm x 1.35mm
Selection Guide
General Purpose
High Reliability
Single
Input Offset
Voltage
(Max)
7mV
Dual
5mV
Quad
5mV
Dual
Quad
7mV
2mV
7mV
+85°C
Operation guaranteed
+105°C
+125°C
BA8391G
BA10393F
BA10339F
BA10339FV
BA2903SF
BA2903SFV
BA2903SFVM
BA2901SF
BA2901SFV
BA2903F
BA2903FV
BA2903FVM
BA2903WF
BA2903WFV
BA2901F
BA2901FV
〇Product structure : Silicon monolithic integrated circuit 〇This product has no designed protection against radioactive rays
www.rohm.com
© 2013 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 14 • 001
1/53
TSZ02201-0RFR0G200200-1-2
11.Dec.2013 Rev.003
http://www.Datasheet4U.com
1 page ![]() ![]() BA8391G BA10393F BA10339xx
BA2903xxx BA2903Sxxx BA2903Wxx BA2901xx BA2901Sxx
Datasheet
Absolute Maximum Ratings - continued
Parameter
Symbol
BA10393F
Rating
BA10339xx
Unit
Supply Voltage
Power Dissipation
Differential Input Voltage(Note 9)
Input Common-mode
Voltage Range
Input Current(Note 10)
Operating Supply Voltage
Operating Temperature Range
Storage Temperature Range
VCC-VEE
SOP8
Pd SOP14
SSOP-B14
VID
VICM
II
VOPR
TOPR
TSTG
0.62 (Note 5,8)
-
-
+36
-
0.49 (Note 6,8)
0.70 (Note 7,8)
+36
(VEE-0.3) to VCC
-10
+2.0 to +36.0
(±1.0 to ±18.0)
+3.0 to +36.0
(±1.5 to ±18.0)
-40 to +85
-55 to +125
V
W
V
V
mA
V
°C
°C
Maximum Junction Temperature
TJMAX
+125
°C
(Note 5) To use at temperature above Ta=25°C reduce 6.2mW.
(Note 6) To use at temperature above Ta=25°C reduce 4.9mW.
(Note 7) To use at temperature above Ta=25°C reduce 7.0mW.
(Note 8) Mounted on a FR4 glass epoxy PCB(70mm×70mm×1.6mm).
(Note 9) The voltage difference between inverting input and non-inverting input is the differential input voltage.
Then input terminal voltage is set to more than VEE.
(Note 10) Excessive input current will flow if a differential input voltage in excess of approximately 0.6V is applied between the input unless some limiting
resistance is used.
Caution: Operating the IC over the absolute maximum ratings may damage the IC. The damage can either be a short circuit between pins or an open circuit
between pins and the internal circuitry. Therefore, it is important to consider circuit protection measures, such as adding a fuse, in case the IC is operated over
the absolute maximum ratings.
Parameter
Symbol
Rating
BA2903Sxxx BA2901Sxx BA2903xxx
Unit
BA2901xx
Supply Voltage
Power Dissipation
Differential Input Voltage (Note 17)
Input Common-mode
Voltage Range
Input Current (Note 18)
Operating Supply Voltage
Operating Temperature Range
VCC-VEE
+36
SOP8
0.78 (Note 11,16)
-
0.78 (Note 11,16)
-
SSOP-B8 0.69 (Note 12,16) - 0.69 (Note 12,16) -
Pd MSOP8 0.59 (Note 13,16) - 0.59 (Note 13,16) -
SOP14
- 0.61 (Note 14,16) - 0.61 (Note 14,16)
SSOP-B14 - 0.87 (Note 15,16) - 0.87 (Note 15,16)
V
W
VID 36 V
VICM
(VEE-0.3) to (VEE+36)
V
II
VOPR
TOPR
-10
+2.0 to +36.0
(±1.0 to ±18.0)
-40 to +105
-40 to +125
mA
V
°C
Storage Temperature Range
TSTG
-55 to +150
°C
Maximum Junction Temperature
TJMAX
+150
°C
(Note 11) To use at temperature above Ta=25°C reduce 6.2mW.
(Note 12) To use at temperature above Ta=25°C reduce 5.5mW.
(Note 13) To use at temperature above Ta=25°C reduce 4.7mW.
(Note 14) To use at temperature above Ta=25°C reduce 4.9mW.
(Note 15) To use at temperature above Ta=25°C reduce 7.0mW.
(Note 16) Mounted on a FR4 glass epoxy PCB(70mm×70mm×1.6mm).
(Note 17) The voltage difference between inverting input and non-inverting input is the differential input voltage.
Then input terminal voltage is set to more than VEE.
(Note 18) Excessive input current will flow if a differential input voltage in excess of approximately 0.6V is applied between the input unless some limiting
resistance is used.
Caution: Operating the IC over the absolute maximum ratings may damage the IC. The damage can either be a short circuit between pins or an open circuit
between pins and the internal circuitry. Therefore, it is important to consider circuit protection measures, such as adding a fuse, in case the IC is operated over
the absolute maximum ratings.
www.rohm.com
©2013 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
5/53
TSZ02201-0RFR0G200200-1-2
11.Dec.2013 Rev.003
http://www.Datasheet4U.com
5 Page ![]() ![]() BA8391G BA10393F BA10339xx
BA2903xxx BA2903Sxxx BA2903Wxx BA2901xx BA2901Sxx
Datasheet
Description of electrical characteristics
Described below are descriptions of the relevant electrical terms used in this datasheet. Items and symbols used are also
shown. Note that item name and symbol and their meaning may differ from those on another manufacturer’s document or
general document.
1. Absolute maximum ratings
Absolute maximum rating items indicate the condition which must not be exceeded. Application of voltage in excess of absolute
maximum rating or use out of absolute maximum rated temperature environment may cause deterioration of characteristics.
(1) Power supply voltage (VCC/VEE)
Indicates the maximum voltage that can be applied between the positive power supply terminal and negative power
supply terminal without deterioration or destruction of characteristics of internal circuit.
(2) Differential input voltage (VID)
Indicates the maximum voltage that can be applied between non-inverting and inverting terminals without damaging
the IC.
(3) Input common-mode voltage range (VICM)
Indicates the maximum voltage that can be applied to the non-inverting and inverting terminals without deterioration
or destruction of electrical characteristics. Input common-mode voltage range of the maximum ratings does not assure
normal operation of IC. For normal operation, use the IC within the input common-mode voltage range characteristics.
(4) Power dissipation (Pd)
Indicates the power that can be consumed by the IC when mounted on a specific board at the ambient temperature 25°C
(normal temperature). As for package product, Pd is determined by the temperature that can be permitted by the IC in
the package (maximum junction temperature) and the thermal resistance of the package.
2. Electrical characteristics
(1) Input offset voltage (VIO)
Indicates the voltage difference between non-inverting terminal and inverting terminals. It can be translated into the
input voltage difference required for setting the output voltage at 0 V.
(2) Input offset current (IIO)
Indicates the difference of input bias current between the non-inverting and inverting terminals.
(3) Input bias current (IB)
Indicates the current that flows into or out of the input terminal. It is defined by the average of input bias currents at
the non-inverting and inverting terminals.
(4) Input common-mode voltage range (VICM)
Indicates the input voltage range where IC normally operates.
(5) Large signal voltage gain (AV)
Indicates the amplifying rate (gain) of output voltage against the voltage difference between non-inverting terminal
and inverting terminal. It is normally the amplifying rate (gain) with reference to DC voltage.
Av = (Output voltage) / (Differential Input voltage)
(6) Supply current (ICC)
Indicates the current that flows within the IC under specified no-load conditions.
(7) Output sink current (ISINK)
Denotes the maximum current that can be output under specific output conditions.
(8) Output saturation voltage, low level output voltage (VOL)
Signifies the voltage range that can be output under specific output conditions.
(9) Output leakage current, High level output current (ILEAK)
Indicates the current that flows into the IC under specific input and output conditions.
(10) Response time (tRE)
Response time indicates the delay time between the input and output signal is determined by the time difference
from the fifty percent of input signal swing to the fifty percent of output signal swing.
www.rohm.com
©2013 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
11/53
TSZ02201-0RFR0G200200-1-2
11.Dec.2013 Rev.003
http://www.Datasheet4U.com
11 Page |
Páginas | Total 30 Páginas | |
PDF Descargar | [ Datasheet BA2901SF.PDF ] |
Número de pieza | Descripción | Fabricantes |
BA2901SF | Ground Sense Comparator | ![]() ROHM Semiconductor |
BA2901SFV | Ground Sense Comparator | ![]() ROHM Semiconductor |
BA2901Sxx | Ground Sense Comparator | ![]() ROHM Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
![]() Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
![]() Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |