|
|
PDF LO25SX Data sheet ( Hoja de datos )
| Número de pieza | LO25SX | |
| Descripción | 3.0V Primary lithium batteries | |
| Fabricantes | SAFT | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de LO25SX (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
|
No Preview Available !
Primary lithium batteries
LO 25 SX
3.0 V Primary lithium - sulfur dioxide (Li-SO2)
High drain capability
“Fat” D - size spiral cell
Benefits
• High and stable discharge voltage
• Very high pulse capability
• Performance not affected by cell
orientation
• Long storage possible before use
• Ability to withstand extreme
temperature
Key features
• Low self - discharge rate
(less than 3% after 1 year of
storage at + 20°C)
• Hermetic glass-to-metal sealing
• Built-in safety vent
(at the negative end of the cell)
• Restricted for transport (class 9)
• UL Component Recognition
(File Number MH 15076)
• Meets shock, vibration and other
environmental requirements of
military specifications
• Made in the USA
Main applications
• Radiocommunications and other
military applications
• Beacons and Emergency Location
Transmitters
• Sonobuoys
• Missiles
Cell size reference
“Fat” D
Electrical characteristics
(typical values for cells stored for one year or less)
Nominal capacity
(at 0.27 A + 20°C 2.0 V cut off. The capacity restored by the cell varies
according to current drain, temperature and cut off)
8.0 Ah
Open circuit voltage (at + 20°C)
3.0 V
Nominal voltage
(at 0.6 A + 20°C)
2.8 V
Maximum recommended continuous current
(to avoid over-heating. Higher currents possible, consult Saft)
2.5 A
Pulse capability : Typically up to 10 A.
(The voltage readings may var y according to the pulse characteristics,
the temperature, and the cell’s previous history. Fitting the cell with a
capacitor may be recommended in severe conditions. Consult Saft)
Storage
(recommended)
(possible without leakage)
+ 30°C (+ 86°F) max
- 60°C / + 85°C
(- 76°F / +185°F)
Operating temperature range
(Short excursions up to + 85°C possible at currents below 1 A)
- 60°C / + 70°C
(- 76°F / + 158°F)
Physical characteristics
Diameter (max)
Height (max; finish without radial tabs)
Typical weight
Li metal content
Standard cell comes with resin potting in the topshell area and
two radial 0.15 mm - thick nickel tabs
Different configurations available on request.
39.5 mm (1.56 in)
50.3 mm (1.97 in)
96 g (3.39 oz)
2.6 g
October 2005
http://www.Datasheet4U.com
1 page | ||
| Páginas | Total 2 Páginas | |
| PDF Descargar | [ Datasheet LO25SX.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| LO25SX | 3.0V Primary lithium batteries | SAFT |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |