|
|
PDF LS14500EX Data sheet ( Hoja de datos )
| Número de pieza | LS14500EX | |
| Descripción | 3.6V Primary lithium-thionyl chloride (Li-SOCl2)High energy density AA-size bobbin cell | |
| Fabricantes | SAFT | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de LS14500EX (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
|
No Preview Available !
Primary lithium battery
LS 14500Ex
new
3.6 V Primary lithium-thionyl chloride (Li-SOCl2)
High energy density
AA-size bobbin cell
For demanding and potentially explosive atmospheres
Benefits
l Used in potentially explosive
atmospheres
l Enhanced capacity
l High voltage response, stable
during most of the lifetime of
the application
l Wide operating temperature
range
(- 60 °C/+ 85 °C)
l Low self-discharge rate
(less than 1 % after 1 year of
storage at + 20 °C)
Key features
l Non-flammable electrolyte
l Compliant with IEC 60079-11
intrinsic safety standard and
IEC 60086-4 safety standard
l Stainless steel container and
end caps
(low magnetic signature)
l Hermetic glass-to-metal sealing
l Underwriters Laboratories (UL)
Component Recognition
l Non-restricted for transport
l Manufactured in UK and China
Main applications
l Gas metering
l Automatic meter reading
l Alarms and security devices
l Miners cap lamps
l Gas detectors
l Air monitoring equipment
l Safety torches
l Gas tanks level monitoring
l Miner equipment
Cell size references
R6 - AA
Electrical characteristics
(typical values relative to cells stored for one year or less at + 30 °C max.)
Nominal capacity
(at 2 mA + 20 °C 2.0 V cut-off. The capacity restored by the cell varies
according to current drain, temperature and cut-off)
2.6 Ah
Open circuit voltage (at + 20°C)
3.67 V
Nominal voltage
(at 0.2 mA + 20°C)
3.6 V
Nominal energy
9.36 Wh
Pulse capability: Typically up to 250 mA
(250 mA/0.1 second pulses, drained every 2 mn at +20 °C from undischarged cells with 10 µA
base current, yield voltage readings above 3.0 V. The readings may vary according to the pulse
characteristics, the temperature, and the cell’s previous history. Fitting the cell with a capacitor
may be recommended in severe conditions. Consult Saft)
Maximum recommended continuous current
(Higher currents possible, consult Saft)
50 mA
Storage
(recommended)
(for more severe conditions, consult Saft)
+ 30°C (+ 86°F) max
Operating temperature range
(Operation above ambient T may lead to reduced capacity and
lower voltage readings at the beginning of pulses. Consult Saft)
- 60°C/+ 85°C
(- 76°F/+ 185°F)
Physical characteristics
Diameter (max)
Height (max)
Typical weight
Li metal content
Available termination suffix
CN, CNR
2 PF, 3 PF, 3 PF RP, 4 PF
CNA (AX)
FL
14.55 mm (0.57 in)
50.3 mm (1.98 in)
16.7 g (~ 0.6 oz)
approx. 0.7 g
radial tabs
radial pins
axial leads
flying leads...etc.
IEC 60079 -11 Intrinsic safety characteristics
(T4 up to + 55°C)
I short-circuit current (max)
Ri (max)
Temperature rise (max)
3.7 A
989 mOhm
+ 78°C
May 2010
http://www.Datasheet4U.com
1 page | ||
| Páginas | Total 2 Páginas | |
| PDF Descargar | [ Datasheet LS14500EX.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| LS14500EX | 3.6V Primary lithium-thionyl chloride (Li-SOCl2)High energy density AA-size bobbin cell | SAFT |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |