|
|
Número de pieza | STA538 | |
Descripción | 2 x 1.3 W class-D amplifier | |
Fabricantes | STMicroelectronics | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de STA538 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
No Preview Available ! STA538
2 x 1.3 W class-D amplifier with analog or digital input
2.0 multichannel digital audio processor with FFX
Features
■ Up to 96 dB dynamic range
■ Sample rates from 8 kHz to 192 kHz
■ FFXTM class-D driver
■ 1.5 V to 1.95 V digital power supply
■ 1.5 V to 3.6 V analog power supply
■ 18-bit audio processing and class-D FFXTM
modulator
■ Digital volume control:
– +36 dB to 105 dB in 0.5 dB steps
– Software volume update
■ Individual channel and master gain/attenuation
■ Automatic invalid input detect mute
■ 2-channel I2S input/output data interface
■ Digitally controlled POP-free operation
■ Input and output channel mapping
■ 250 mΩ output CMOS Rdson
■ > 90% efficiency
■ 2 x 1.3 W (10% THD) on 4 Ω at 3.6 V
■ 2 x 0.7 W (10% THD) on 8 Ω at 3.3 V
■ Stereo headphone plus mono speaker
application:
– 50 mW stereo into 32 Ω headphone,
1.2 W mono into 4 Ω speaker at 3.3 V
– 100 mW stereo into 16 Ω headphone,
1.2 W mono into 4 Ω speaker at 3.3 V
TFBGA48
VFQFPN52
Order codes
Part number
STA538B
STA538Q
January 2007
Rev 1
Package
TFBGA48 (tube)
VFQFPN52 (tube)
1/59
www.st.com
1
http://www.Datasheet4U.com
1 page STA538
1 Intr
oduction
Introduction
The STA538 is a digital stereo class-D audio amplifier. It includes an audio DSP, a ST
proprietary high-efficiency class-D driver and CMOS power output stage. It is intended for
high-efficiency digital-to-power-audio conversion for portable applications. The STA538 also
provides output capabilities for FFXTM. In conjunction with a power device, the STA538
provides high-quality digital amplification.
The STA538 contains an on-chip volume/gain control.
The PWM amplifier achieves greater than 90% efficiency for longer battery life for portable
systems.
The innovative class-D modulation, allows the STA538 to work without external LC filters
and without a heatsink.
The STA538 I2CDIS pin disables the audio DSP functions to provide a direct conversion of
the input signal into output power (the I2C interface is disabled). This conversion is done
without the microcontroller.
The STA538 is designed for low-power operation with extremely low-current consumption in
standby mode. It is available in two packages: the TFBGA48 and the VFQFPN52. These are
very thin packages (1.2 mm thick) intended for small portable applications.
Figure 1. Block diagram
Serial digital
audio interface
VBIAS
INL
VHI
VCM
VLO
INR
PGA
ADC
ADC
Digital
volume
FFX
modulator
OSC
PWM out I/F
PLL Divider
Power
driver
Power
driver
Control
interface
OUT1A
OUT1B
OUT2A
OUT2B
5/59
5 Page STA538
Connection diagrams and pin descriptions
Table 3. Package: VFQFPN52 (continued)
Pin #
Name
Type
Description
7
VLO
Analog input ADC Low reference voltage
40
FILT
Analog
input/output
PLL loop filter terminal
42 VDDPLL Supply
PLL analog supply
41 GNDPLL Ground
PLL analog ground
16
OUT1A
Analog output Channel 1 half-bridge A output
19
OUT1B
Analog output Channel 1 half-bridge B output
25
OUT2A
Analog output Channel 2 half-bridge A output
22
OUT2B
Analog output Channel 2 half-bridge B output
31
POWERFAULT/
EADP
Digital output
Power fault signal (active high)/external audio power
down signal
15
VCC1A
Supply
Channel 1 half-bridge A power supply
20
VCC1B
Supply
Channel 1 half-bridge B power supply
26
VCC2A
Supply
21
VCC2B
Supply
Channel 2 half-bridge A power supply
Channel 2 half-bridge B power supply
17
GND1A
Ground
Channel 1 half-bridge A power ground
18
GND1B
Ground
Channel 1 half-bridge B power ground
24
GND2A
Ground
Channel 2 half-bridge A power ground
23
GND2B
Ground
30
VCC33
Supply
Channel 2 half-bridge B power ground
Pre-driver supply
27
GND33
Ground
Pre-driver ground
13
VDD1
Supply
Digital supply
12
GND1
Ground
44
VDD2
Supply
Digital ground
Digital supply
43
GND2
Ground
Digital ground
29 VDDIO1 Supply
I/O ring supply
28 GNDIO1 Ground
I/O ring ground
50 VDDIO2 Supply
49 GNDIO2 Ground
I/O ring supply
I/O ring ground
11/59
11 Page |
Páginas | Total 30 Páginas | |
PDF Descargar | [ Datasheet STA538.PDF ] |
Número de pieza | Descripción | Fabricantes |
STA533WF | quad power half bridge | ST Microelectronics |
STA538 | 2 x 1.3 W class-D amplifier | STMicroelectronics |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |