Datasheet.kr   

AQ3A1-C2-T24VDC 데이터시트 PDF




Panasonic에서 제조한 전자 부품 AQ3A1-C2-T24VDC은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 AQ3A1-C2-T24VDC 자료 제공

부품번호 AQ3A1-C2-T24VDC 기능
기능 RELAYS
제조업체 Panasonic
로고 Panasonic 로고


AQ3A1-C2-T24VDC 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.



전체 7 페이지수

미리보기를 사용할 수 없습니다

AQ3A1-C2-T24VDC 데이터시트, 핀배열, 회로
SIL type SSR with
9mm thickness
controls up to 3A
AQ8Please contact us
about TÜV certified
products.
AQ8 RELAYS
RoHS compliant
FEATURES
1. Slim with 9 mm .354 inch thickness
The thin type (45 mm long × 24 mm high
× 9 mm wide) (1.772×.945×.354 inch)
permits high density mounting.
2. Excellent in noise resistance
Since the input and output are insulated
by the phototriac coupler, the noise on
the output side is not fed back to the input
side.
3. Snubber circuit integrated
The snubber circuit is integrated to
prevent malfunction caused by the rapid
rise of the voltage on the output side,
such as inductive load and noise.
4. Zero-cross and random types are
available.
The zero-cross type generates minimal
noise by suppressing occurrence of radio
frequency interference (RFI) and electro-
magnetic interference (EMI).
The random type features a short
operation time which permits phase
control.
5. High dielectric strength: 3,000 V AC
(between input and output)
6. Two kinds of terminals distance are
available. (5.08 mm and 7.62 mm)(.200
and .300 inch)
7. High reliability, long life and
maintenance-free
TYPICAL APPLICATIONS
1. Most suitable as drivers for small
size AC motors, solenoids, solenoid
valves and so on.
2. Copying equipment
3. Air conditioners
4. Industrial equipment such as NC
machines, sequencers, robots, etc.
ORDERING INFORMATION
Load current
2A
3A
Load voltage
1: 75 to 125 V AC
2: 75 to 250 V AC
Input terminal distance
C1: 5.08 mm .200 inch
C2: 7.62 mm .300 inch
Type
ZT: Zero-cross type
T: Random type
Input voltage
5, 12, 24 V DC
AQ
ASCTB213E 201201-T1
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
http://www.Datasheet4U.com




AQ3A1-C2-T24VDC pdf, 반도체, 판매, 대치품
AQ8
• 3 A type
Part No. AQ3A1-C1-
T5VDC
AQ3A1-C2-
Item T5VDC
Control voltage
Input
side Input impedance
5 V DC
(4 to 6V)
Approx. 0.3 k
Drop-out voltage
Min. 0.5 V
AQ3A1-C1-
T12VDC
AQ3A1-C2-
T12VDC
12 V DC
(9.6 to 14.4V)
Approx. 0.8 k
Min. 1.2 V
AQ3A1-C1-
T24VDC
AQ3A1-C2-
T24VDC
24 V DC
(21.6 to 26.4V)
Approx. 1.8 k
Min. 2.4 V
AQ3A2-C1-
T5VDC
AQ3A2-C2-
T5VDC
5 V DC
(4 to 6V)
Approx. 0.3 k
Min. 0.5 V
AQ3A2-C1-
T12VDC
AQ3A2-C2-
T12VDC
12 V DC
(9.6 to 14.4V)
Approx. 0.8 k
Min. 1.2 V
AQ3A2-C1-
T24VDC
AQ3A2-C2-
T24VDC
24 V DC
(21.6 to 26.4V)
Approx. 1.8 k
Min. 2.4 V
Max. load current
3 A*2
Load
side
Load voltage
Frequency
Repetitive peak
OFF voltage
Non-repetitive
surge current
Max. “OFF-state”
leakage current
Max. “ON-state”
voltage drop
Min. load current
75 to 125 V AC
400 V
2.5 mA (100 V applied)
25 mA*4
45 to 65 Hz
80 A*3
1.6 V
75 to 250 V AC
600 V
5 mA (200 V applied)
50 mA*4
OFF state dV/dt
50 V/µs
Notes: *1. Refer to REFERENCE DATA “3. Characteristics of input current vs. input voltage”.
*2. Refer to REFERENCE DATA “1. Characteristics of load current vs. ambient temperature”.
*3. Refer to REFERENCE DATA “2. characteristics of non-repetitive surge current vs. carrying time”.
*4. When the load current is less than the rated minimum load current, please refer to “Cautions for Use of SSR”.
Remarks
*1
At ambient temperature of
30°C or less
In one cycle at 60 Hz
at 60 Hz
at max. carrying current
At ambient temperature of
80°C
2. Characteristics (Ambient temperature: 20°C 68°F; Input voltage ripple: 1% or less)
Item
Type
Zero-cross type
Random type
Operate time, max.
1/2 cycle of voltage sine wave + 1 ms
1 ms
Release time, max.
Insulation resistance, min.
1/2 cycle of voltage sine wave + 1 ms
109between input and output
Breakdown voltage
3,000 V AC between input and output
Vibration
resistance
Destructive
Functional
10 to 55 Hz at double amplitude of 3 mm
10 to 55 Hz at double amplitude of 3 mm
Shock
resistance
Destructive
Functional
Ambient temperature
Storage temperature
Min. 980 m/s2 {100 G}
Min. 980 m/s2 {100 G}
–30°C to +80°C –22°F to +176°F
–30°C to +100°C –22°F to +212°F
Operational method
Zero-cross (Turn ON and Turn OFF)
Random turn ON, zero-cross turn OFF
Remarks
at 500 V DC
For 1 minute
1 hour for X, Y, Z axis
10 min. for X, Y, Z axis
5 times each for X, Y, Z axis
4 times each for X, Y, Z axis
REFERENCE DATA
1. Characteristics of load current vs. ambient
temperature
Use load current within range specified in the figure
below.
2.-(1) Characteristics of non-repetitive surge
current vs. carrying time
(2 A type)
3.0
3 A type
2.5
2 A type
2.0
1.5
1.0
0.5
0
–30 0
20 40 60 80
Ambient temperature, °C
100
80
60
40
20
0
5 10
50 100
No. of cycles at 60 Hz
2.-(2) Characteristics of non-repetitive surge
current vs. carrying time
(3 A type)
100
80
60
40
20
0
5 10
50 100
No. of cycles at 60 Hz
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
ASCTB213E 201201-T1

4페이지










AQ3A1-C2-T24VDC 전자부품, 판매, 대치품
NOTE
1. When used for the load less than
rated
In case of the load current less than
rated, malfunction may result from the
residual voltage across the both ends of
the load even if the solid state relay is
turned off. Use a dummy resistor as a
countermeasure.
The total of the current through the
resistor and the load current must exceed
the min. rated load current.
R0 Dummy resistor
SSR 1
Load
2
Load
power
source
In case the dummy resistor is not used,
keep in mind that the residual voltage
becomes as follows:
Example:
For the inductive load by the 20 mA load
current and the 200 V AC load voltage,
the load impedance becomes 10 k and
Ve/V = 14% is estimated from the right
above graph. Accordingly, the 28 V
voltage remains across the both ends of
the load when the solid state relay is
turned off.
• Characteristics of residual voltage vs.
load impedance
100
f= 60Hz
Ve: Residual voltage
V: Power voltage
80
Ve
V
×
60
100
(%)
40
1
SSR
2
Load
Ve
V
Power factor:1
20
(resistor load)
Power factor: 0.4
(induction load)
0 10 20 30 40 50
Load impedance (k)
2. when the terminal is bent
Care shall be taken neither to apply
mechanical stresses to the mold area of
the solid state relay nor to bend the
terminal 45 degrees or more.
Solid
state relay
Max.
45°
Printed circuit board
Solder
AQ8
Recommended Temperature Controllers
<KT4H Temperature Controller>
Our temperature controller is recommended for use with our Solid State Relays.
48mm
1.890inch
48mm
1.890inch
56mm
2.205inch
Features
• Space saving requiring only a depth of 65 mm
• Data collection possible through a PLC using RS485 communication
• Tool port is standard for easy data setting
• Inverted LCD + backlight for good legibility with large characters
• Excellent operability and rich optional control functions
Substitute part numbers
Power supply
Control output
Part No.
100 to 240 V AC
Non-contact voltage output
AKT4H112100
*F or detailed product information about temperature controllers, please refer to our website:
http://industrial.panasonic.com/ac/e/
For Cautions for Use.
ASCTB213E 201201-T1
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/

7페이지


구       성 총 7 페이지수
다운로드[ AQ3A1-C2-T24VDC.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
AQ3A1-C2-T24VDC

RELAYS

Panasonic
Panasonic
AQ3A1-C2-T24VDC

SOLID STATE RELAY

Nais
Nais

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵