|
|
Número de pieza | HT704F | |
Descripción | Projected Capacitance Touch Panel | |
Fabricantes | SUO | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de HT704F (archivo pdf) en la parte inferior de esta página. Total 18 Páginas | ||
No Preview Available ! Document Title
Document No.
Page No.
Revision
1 / 18
A/00
Projected Capacitance Touch Panel
Specification
Model: HT704F
Revision Date : 2010/12/08
PLACE OF SEAL
CUSTOMER APPROVED
CUSTOMER CHECKED
.Please sign to confirm your acceptance and return a copy for our record filling
Approved By
Checked By
Edited By
http://www.Datasheet4U.com
1 page Document Title
Document No.
Page No.
Revision
5 / 18
A/00
4.Reliability
No. Item
1 High Temperature
Operating
2 Low Temperature
Operating
3 High Temperature High
Humidity Operating
4 High Temperature
Storage
5 Low Temperature
Storage
6 High Temperature High
Humidity Storage
7 Thermal Shock (Non
Operating)
8 FPC Bending test
9 FPC connection Insert /
Remove test
10 Touch panel Surface
Hardness test
Test Condition
after exposing at 60°C for 240 hours and at normal
temperature and humidity for 24 hours
after exposing at -20°C for 240 hours and at normal
temperature and humidity for 24 hours (except for
dew gathering)
after exposing at 40°C, 80%RH for 240 hours (after
dehumidifying in the chamber 60°C and 50% max.)
and at normal temperature and humidity for 24
hours (except for dew gathering)
after exposing at 60°C for 240 hours and at normal
temperature and humidity for 24 hours
after exposing at -30°C for 240 hours and at normal
temperature and humidity for 24 hours (except for
dew gathering)
after exposing at 60°C ,90%RH for 240 hours (after
dehumidifying in the chamber 60°C and 50% max.)
and at normal temperature and humidity for 24
hours (except for dew gathering)
after exposing under the conditions between -30°C
(30min) and 70°C (30 min) by 50 cycles (taking out at
70°C) and at normal temperature and humidity for
24 hours (except for dew gathering) Test sample:
4pcs.
Condition:
Connector side: bending angle will be decided per
different project. Touch Panel Side: bending angle
will be decided per different project. Minimum 10
cycles for each side. Criterion: Normal performance
after bending test. There shall be no damage on FPC
Condition: Insert / Remove Touch panel FPC for 10
cycles. Criterion: Normal performance after FPC
connection Insert / Remove test
Condition: Pencil hardness = 5H, Loading = 475g, to
stroke on touch panel surface. Criterion: Normal
performance after surface hardness test. There shall
be no scratch on touch panel surface
Note
5 Page Document Title
Document No.
8.3 I2C Timing
Slave Address = 0b0101110x
Page No. 11 / 18
Revision A/00
Fig.4 IIC Command Write Example
Fig.5 IIC Command Read (Single-Byte Data) Example
11 Page |
Páginas | Total 18 Páginas | |
PDF Descargar | [ Datasheet HT704F.PDF ] |
Número de pieza | Descripción | Fabricantes |
HT7044A | Voltage Detector | Holtek Semiconductor Inc |
HT7044A-1 | (HT70xxA-1) Voltage Detector | Holtek Microelectronics |
HT7044A-1 | (HT70xxA-1) Voltage Detector | Holtek Microelectronics |
HT704F | Projected Capacitance Touch Panel | SUO |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |