DataSheet.es    


PDF RPS-409A Data sheet ( Hoja de datos )

Número de pieza RPS-409A
Descripción analog ultrasonic sensor
Fabricantes ETC 
Logotipo ETC Logotipo



Hay una vista previa y un enlace de descarga de RPS-409A (archivo pdf) en la parte inferior de esta página.


Total 2 Páginas

No Preview Available ! RPS-409A Hoja de datos, Descripción, Manual

RPS-409A
Features
• Input Voltage 20-30VDC
• Reverse Polarity Protected
• Analog Voltage Output
• Short Circuit Protected
• Temperature Compensation
• Wide Temperature Range
• Various Sensing Ranges
• LED Indicator
• Self Contained Sensor
• Quick Disconnect Connector
• PVC Housing
• Sync / Enable Input Line
The RPS-409A analog ultrasonic sensor
is a self contained sensor in a 30mm PVC barrel
housing. It is powered by 20-30VDC with
reverse polarity protection.
The RPS-409A has a short circuit pro-
tected analog 0-10VDC output. The analog
voltage is a fixed volts per inch based on the
maximum range of the unit. For example using
the RPS-409A-80, the output is a linear 0.125
volts per inch. A target placed 10 inches from the
sensor will result in an output signal of 1.25 volts
or a target placed at 80 inches from the sensor will
result in an output of 10 volts.
0.00V @ 0"
10.0V @ 80"
1.25V @ 10"
The RPS-409A has temperature compen-
sation built in to provide accurate readings
throughout the entire operating temperature range.
For set up purposes an LED indicator is
provided. The LED is Green when not detecting
and changes to Red when a target moves into
place. The sensor is completely sealed and the
connection is made by way of IP and NEMA
rated cables.
Besides the input and output lines there is
a sync / enable line provided. This can be used
for connecting multiple sensors together to pre-
vent cross talk, or to fire the sensor at a particular
time.
The RPS 409A is designed to take advan-
tage of todays PLC and computer analog input
cards. The analog card chosen will determine the
resolution of the system. The numerical values
that are programmed into the PLC or computer
will determine the zero and span.
If a set point or set points are required in
the application, please refer to the Migatron
SPC-701, SPC-704, or M-1000 control prod-
ucts. Both the SPC-704 and M-1000 can also
provide excitation power to drive the sensor.
http://www.Datasheet4U.com

1 page





PáginasTotal 2 Páginas
PDF Descargar[ Datasheet RPS-409A.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
RPS-409Aanalog ultrasonic sensorETC
ETC

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar