|
|
|
부품번호 | 269-A 기능 |
|
|
기능 | 69-Type14xxnmDFBPumpLaserModule | ||
제조업체 | AgereSystems | ||
로고 | |||
전체 8 페이지수
Data Sheet
June 2001
269-Type 14xx nm Pump Laser Module
with Fiber Grating
Applications
s Raman pump modules (RPM)
s Erbium-doped fiber amplifiers (EDFA)
Description
Offering superior wavelength stability, the 269-type pump
laser module with fiber grating is designed as a continuous-
wave (CW) optical pump source for erbium-doped fiber ampli-
fiers and Raman pump modules.
Features
s High-coupled rated output power up to 280 mW,
CW
s Available with fiber grating for wavelength stability
(1420 nm—1510 nm)
s Wide environmental range
s Field-proven packaging technology
s InGaAsP/InP high-power, strained multiple quan-
tum-well (MQW) chip design
s Internal thermoelectric cooler (TEC)
s InGaAs PIN photodetector back-facet monitor
s Single-mode and polarization-maintaining fiber pig-
tails
s Compact, 14-pin butterfly package
s Industry compatible package and pinout
The 269-type pump laser module with fiber grating
represents a family of thermoelectrically cooled,
high-power lasers. These modules utilize a fiber
Bragg grating to achieve stable wavelength perfor-
mance within the 1420 nm to 1510 nm range, over
the full operating temperature range. They are
designed as continuous-wave (CW) optical pump
sources for dense wavelength-division multiplexing
(DWDM) EDFA and Raman applications operating in
the C- and L-bands. The 269-type laser modules with
polarization-maintaining fiber are particularly suitable
for use in RPM designs requiring the high-power
combinations of multiple pumps.
The laser optical spectrum is locked by the fiber grat-
ing over a wide optical power range. The optical
spectrum is very narrow and the peak wavelength is
nearly insensitive to temperature variations and back
reflections.
The laser modules incorporate a high-power, quan-
tum-well laser chip that achieves grating-stabilized
fiber powers ranging to 280 mW.
An integral thermoelectric cooler (TEC) stabilizes the
laser at room temperature and, combined with a her-
metic environment, allows the device to achieve
high-power operation over the extended temperature
range of 0 °C to 75 °C. An internal InGaAs PIN pho-
todiode, mounted behind the laser diode, functions
as the laser detector and monitors light emissions
from the rear facet of the laser.
The 269-type module is offered in a 14-pin, hermetic
butterfly package.
269-Type 14xx nm Pump Laser Module
with Fiber Grating
Data Sheet
June 2001
Electrical/Optical Characteristics (continued)
Table 3. TEC and Thermistor Characteristics (All performance parameters are specified for IF, OP, TSET = 25 °C,
unless otherwise specified.)
Parameter
TEC Current:
PO = 120 mW
PO = 130 mW
PO = 140 mW
PO = 150 mW
TEC Current:
PO = 160 mW
PO = 170 mW
PO = 180 mW
PO = 190 mW
PO = 200 mW
TEC Current:
PO = 210 mW
PO = 220 mW
PO = 230 mW
PO = 240 mW
PO = 250 mW
PO = 260 mW
PO = 270 mW
PO = 280 mW
TEC Voltage:
PO = 120 mW
PO = 130 mW
PO = 140 mW
PO = 150 mW
TEC Voltage:
PO = 160 mW
PO = 170 mW
PO = 180 mW
PO = 190 mW
PO = 200 mW
TEC Voltage:
PO = 210 mW
PO = 220 mW
PO = 230 mW
PO = 240 mW
PO = 250 mW
PO = 260 mW
PO = 270 mW
PO = 280 mW
Thermistor Resistance
Themistor B Constant
Symbol
ITEC
ITEC
ITEC
VTEC
VTEC
VTEC
RTHERM
B
Conditions
TSET = 25 °C;
TCASE = 75 °C;
∆T = 50 °C, EOL
TSET = 25 °C;
TCASE = 70 °C;
∆T = 45 °C, EOL
TSET = 25 °C;
TCASE = 65 °C;
∆T = 40 °C, EOL
TSET = 25 °C;
TCASE = 75 °C;
∆T = 50 °C, EOL
TSET = 25 °C;
TCASE = 70 °C;
∆T = 45 °C, EOL
TSET = 25 °C;
TCASE = 65 °C;
∆T = 40 °C, EOL
25 °C Laser Diode
Set Temperature
—
Min Max Unit
— 1.6
— 1.6
— 1.6
— 1.6
— 1.7
— 1.7
— 1.7
— 1.7
— 1.7
— 2.0
— 2.0
— 2.0
— 2.0
— 2.0
— 2.0
— 2.0
— 2.0
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
— 3.5
— 3.5
— 3.5
— 3.5
— 3.7
— 3.7
— 3.7
— 3.7
— 3.7
— 4.2
— 4.2
— 4.2
— 4.2
— 4.2
— 4.2
— 4.2
— 4.2
9.5 10.5
3700 4100
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
kΩ
K
4 Agere Systems Inc.
4페이지 Data Sheet
June 2001
269-Type 14xx nm Pump Laser Module
with Fiber Grating
Laser Safety Information
Class IIIb Laser Product
FDA/CDRH Class IIIb laser product. All versions are Class IIIb laser products per CDRH, 21 CFR 1040 Laser
Safety requirements. All versions are Class IIIb laser products per IEC * 60825-1:1993. The device has been
classified with the FDA under accession number 8720010.
This product complies with 21 CFR 1040.10 and 1040.11.
8.8 µm/125 µm single-mode fiber pigtail (see Fiber Characteristics, page 5).
Wavelength = 1.40 µm—1.52 µm.
Maximum power = 400 mW.
Because of size constraints, laser safety labeling (including an FDA Class IIIb label) is not affixed to the module but
attached to the outside of the shipping carton.
Product is not shipped with power supply.
Caution: Use of controls, adjustments, and procedures other than those specified herein may result in
hazardous laser radiation exposure.
DANGER
INVISIBLE LASER RADIATION
IS EMITTED FROM THE END
OF FIBER OR CONNECTOR
Avoid direct exposure to beam
Do not view beam directly with
optical instruments
INVISIBLE LASER RADIATION EMITTED FROM END OF FIBER OR CONNECTOR
Avoid exposure to beam
Class 3B Laser Product IEC-60825M 1993; Max. Output: 400 mW; Wavelength: 1.40 µm—1.52 µm
* IEC is a registered trademark of The International Electrotechnical Commission.
Agere Systems Inc.
7
7페이지 | |||
구 성 | 총 8 페이지수 | ||
다운로드 | [ 269-A.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
269-1 | 269-Type14xxnmPumpLaserModulewithFiberGrating | AgereSystems |
269-2 | 69-Type14xxnmDFBPumpLaserModule | AgereSystems |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |