Datasheet.kr   

SC-9100 데이터시트 PDF




Johnson Controls에서 제조한 전자 부품 SC-9100은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 SC-9100 자료 제공

부품번호 SC-9100 기능
기능 DDC Controller
제조업체 Johnson Controls
로고 Johnson Controls 로고


SC-9100 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.




전체 19 페이지수

미리보기를 사용할 수 없습니다

SC-9100 데이터시트, 핀배열, 회로
European Electronic Controls Catalogue
Catalogue Section
Product Bulletin
Issue
Series SC-9100
Easy DDC Controller
B
SC-9100
0999
Introduction
SC 9100 is a preconfigured, controller, designed
for the control of heating, ventilation or air
conditioning installations. The SC-9100 is a
unique controller with multiple standard
applications, which can be chosen from the
controller’s memory during installation.
Parameters can be adapted to fit the exact
requirements. Other application programs
may be created on quantity order.
The display shows in clear text the inputs,
outputs and main control information. The
controller is protected to avoid unauthorized use
(password). The SC 9100 is a full stand-alone
controller, and may be connected to a
communication bus as part of a JOHNSON
CONTROLS Supervisory System.
The room command module SC-9180 may be
connected to the SC-9100 to provide remote set
point and real time clock.
Series SC-9100 Easy DDC Controller
and Application Manual
Features and Benefits
! Ready-to-use connection diagrams
No extra engineering required
! Great number of application programs
available from a single controller
! Clear alpha-numeric backlighted
display
The most adapted solution for your application is
ready to use.
Provides easy reading of the control information
! Removable connectors, DIN rail
mounting or screw mounting
Simplifies the installation
! Communication bus
! Real time clock option using SC-9180
room command module
Possibility to integrate the SC 9100 into a Johnson
Controls supervisory system
Accuracy of digital clock and easy reading through
LCD display
© 1999 Johnson Controls, Inc.
Order No. PD-SC9100-E
B18
http://www.Datasheet4U.com




SC-9100 pdf, 반도체, 판매, 대치품
4
Dimensions:
6
4.6
DIN-rail type 35 mm/13/8 DIN/EN50022
SC-91 00
Triacs 1 and
2 separation
jumper JP4
JP4
C
E
SC-9100
107
Mounting Bracket
Separable Connectors
28
56
Operation
Front panel:
= “Up” key, used to increase a value, to
scroll among a set of possible values or to
change to next page.
When the SC-9100 is switched ON for the first time,
it asks the user to choose one application. After the
application is loaded from the internal library, the SC
9100 will display as a first or default
= “Down” key, used to decrease a value, to
scroll among a set of possible values or to
change to previous page.
C = Used to decrease the access level or to
abandon a modification operation without
confirming modifications.
E = Used to start a modification operation or
to finish it by confirming modification. Used
also to verify the status of alarms.
window the status of the main controlled parameters.
Integration:
SC-9100 belongs to the Johnson Controls
System 91 and is fully compatible with
JC Supervisory Systems.
B18

4페이지










SC-9100 전자부품, 판매, 대치품
P/N 24-85638-1036
SeSrieersiesSRCC-931100
EIlnescttraolnlaictiTohnerSmhoesetat t
with “Off Cycle” Defrost
Series SC-9100
Fig. 2 Connection Diagram
6
4.6
B
SC-9100
C
E
JP4
C
107
A
D
Fig. 1 Dimensions
28
56
ENGLISH
Series SC-9100
#5; DDC Controller
READ THIS INSTRUCTION SHEET CAREFULLY BEFORE
INSTALLING
Before installing the dev ice. F irst s elect the appl ication nee-
ded from the “Application Manual” and refer to the connection
diagram in the “Application Note” related to the application.
For further information, read the “Product Data Sheet”.
Fig. 1
SC-9100 Dimensions and Mounting
A. Mounting Brackets
B. Release Clip
C. T o s eparate T riac 1 and Triac 2 commons, re-
move jumper JP4.
D. Removable connectors
Fig. 2 General Connection Diagram
Note
Installation, electric wiring and adjustments should conform to
local codes and must be c arried out by authorized personnel
only. Users are reminded of their responsibility to ensure that
all J ohnson C ontrols’ pr oducts ar e us ed s afely, and without
risk to health and property.
Mounting and Installation (see Fig. 1)
For surface mounting:
Slide 2 mounting brackets (A) into the slots. Fix to the sur-
face using using the 4 mm Ø self-tapping screws.
For DIN-rail mounting:
Place the controller on the upper edge of the rail and snap
the controller onto the 35 mm O mega r ail. T o r elease,
insert a screwdriver into the clip (B) at the base and pull.
Wiring (See Fig. 2)
(see “ Application N ote”, r elated to the ac tual appl ication for
the correct wiring diagram)
Switch off pow er s upply w hen i nstalling or s ervicing to
prevent damage or electrical; shock.
The CMOS circuits in the controller are sensitive to static.
Do not touch components without taking suitable precauti-
ons.
Terminals are made via the terminal blocks, at the top and
bottom of the controller, w hich ac cept up to 1.5 mm 2 wi -
res.
Low voltage wiring must be physically separated from line
voltage and power w iring, and a di stinctive c olour ( white
or pink) is recommended.
Keep all cables as short as possible and tie in position.
Do not run cables close to transformers or high frequency
generating equipment.
The 24V supply must be stable and not shared with other
switched inductive loads.
Complete wiring and check the connections before apply-
ing power. Inc orrect w iring may c ause per manent dama-
ge.
Ratings:
Supply Voltage
Power Consumption
CE conformity
24 Vac ± 15%, 50/60 Hz
4 VA
EMC Directive 89/336/EEC
EN-50082-1
EN-50081-1 when mounted in
metal grounded cabinet
Amb. Operating 0 - 50° C, 10 - 90 R.H.
Conditions non-condensing
Input/Output See “Product Data Sheet”
Repair and Replacement
Field repair is not recommended. If the c ontrol is not w orking
properly and al l wiring is correct the control should be repla-
ced. Please check with your nearest supplier.
FRANÇAIS
Série SC-9100
#5; Régulateur Numérique
LIRE SOIGNEUSEMENT CES INSTRUCTIONS AVANT
DE COMMENCER L’INSTALLATION
Avant de commencer l’ins tallationsélectionner v otre appli-
cation à partir de la not ice technique et du manuel d’appli-
cation où v ous t rouverez le s chéma dét aillé de rac corde-
ment.
Des informations détaillées se trouvent dans la notice.
Fig. 1
SC-9100 Dimensions et Montage
A. Pattes de montage
B. Clip de verrouillage
C. Pour is oler les c ommuns des T riac1 et
retirer le cavalier JP4.
D. Connecteurs débrochables
2,
Fig. 2 Schéma général de raccordement
Note
L’installation et le rac cordement des produits doivent être
réalisés selon les normes en v igueur et les règles de l’art.
Il est rappelé qu’il es t de la res ponsabilité de l’ut ilisateur
de s ’assurer que les produit s sont installés sans risque
pour les personnes et les biens.
Montage et Installation ( Fig. 1)
Montage sur panneau :
Glisser les pattes de montage (A) dans les logements.
Fixer à l’aide de vis Ø 4 mm.
Montage sur rail DIN :
Placer le régulat eur s ur la part ie s upérieure du rail et
appuyez pour l’enc liqueter s ur le rail Om ega 35 m m.
Insérez un tournevis en (B) et tirez pour liberer.
Raccordements ( Fig. 2)
(voir “N ote d’applic ation”,pour obt enir le s chéma correct
de raccordements)
Couper l’alimentation av ant t oute int ervention af in d’é-
viter tout risque de déterioration ou électrocution.
Le c ircuit CMOS du régulat eur es t sensible à l’électri-
cité statique. Prendre les préc autions d’us age av ant
toute intervention
Les rac cordements s ’effectuent par des bornes en
parties haute et basse de l’appareil. section 1.5 mm2
Dans les armoires il es t nécessaire de s éparer la bas-
se tension du c ourant fort. Utilisez du f il blanc ou rose
pour faciliter le repérage.
Les liaisons doivent être aussi courtes que possible.
Eviter le cheminement des c âbles près de s ources de
rayonnement électromagnétique.
Le 24Vca doit être stable et indépendant de l’alimenta-
tion de charges inductives.
Tester soigneusement le c âblage av antlamise s ous
tension. Une erreur de c âblage peut dét eriorer l’appa-
reil.
Calibres:
Alimentation 24 Vca ± 15%, 50/60 Hz
Consommation 4 VA
CE conformité
Conditions de
f onctionnement
Entrées/Sorties
EMC Directive 89/336/EEC
EN-50082-1
EN-50081-1 lorsque monté
dans une armoire métallique
reliée à la terre
0 - 50° C, 10 - 90 H.R.
sans condensation
Voir notice technique
Reparations et remplacement
Il es t déc onseillé de réparer l’appareil s ur s ite. En cas de
mauvais f onctionnement, après av oir v érifié le c âblage,
remplacez l’appareil. Contactez Johnson Controls.

7페이지


구       성 총 19 페이지수
다운로드[ SC-9100.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
SC-9100

DDC Controller

Johnson Controls
Johnson Controls

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵