|
|
|
부품번호 | BD30KA5FP-E2 기능 |
|
|
기능 | 500mA Variable/Fixed Output LDO Regulators | ||
제조업체 | ROHM Semiconductor | ||
로고 | |||
전체 18 페이지수
Datasheet
500mA Variable/Fixed Output
LDO Regulators
BDxxKA5 Series BDxxKA5W Series BD00KA5W Series
●General Description
The BDxxKA5 series are low-saturation regulators that are available for output currents up to 500mA. The output voltage
precision is ±1%. These LDO regulators are offered in several output voltages and package lineups with or without
ON/OFF switches (that set the circuit current to 0μA at shutdown). This series can be used for a broad spectrum of
applications ranging from TVs and car audio systems to HDDs, PCs, and DVDs. There regulators have a built-in
overcurrent protection circuit that prevents the destruction of the IC, due to output short circuits and a thermal shutdown
circuit.
●Features
Output voltage precision: ±1%
Low-saturation voltage with PMOS output: 0.12V
Typ.(Io=200mA)
Built-in over-current protection circuit
Built-in thermal shutdown circuit
Shutdown switch (BDxxKA5WFP and BDxxKA5WF
series)
Ceramic capacitor compatible (recommended
capacitance: 1μF or greater)
●Key Specifications
Input Power Supply Voltage:
Output voltage type: BA00KA5
BAxxKA5
Output current:
Operating temperature range:
5.5V (Max.)
Variable
Fixed
500mA (Max.)
-40℃ to +105℃
●Applications
Microcontrollers and all electronic devices that use
logic circuit
●Packages
SOP8
TO252-3
TO252-5
W (Typ.) x D (Typ.) x H (Max.)
5.00mm x 6.20mm x 1.71mm
6.50mm x 9.50mm x 2.50mm
6.50mm x 9.50mm x 2.50mm
SOP8
TO252-3
TO252-5
●Lineup matrix
Part Number
BDxxKA5WFP
BDxxKA5WF
BDxxKA5FP
Output Voltage (V)
1.0 1.2 1.5 1.8 2.5 3.0 3.3 Variable
○○○○○○○
○
○○○○○○○
○
○○○○○○○
-
Package
TO252-5
SOP8
TO252-3
●Ordering Information
BD x x K A 5
W
xx-
E2
Part Number Output voltage
00:Variable
Other: Fixed
Current capacity
KA5: 500mA
Shutdown Switch Package
W: Include
None:without FP : TO252-3
TO252-5
F : SOP8
Packaging and forming specification
E2: Embossed tape and reel
○Product structure:Silicon monolithic integrated circuit
www.rohm.com
© 2012 ROHM Co., Ltd. All rights reserved.
TSZ22111・14・001
○This product is not designed protection against radioactive rays.
1/15
TSZ02201-0R6R0A600150-1-2
26.Jun.2012 Rev.001
BDxxKA5 Series BDxxKA5W Series BD00KA5W Series
Datasheet
●Absolute Maximum Ratings (Ta=25℃)
Parameter
Power Supply Voltage
Output Control Terminal Voltage
TO252-3
Power Dissipation TO252-5
SOP8
Symbol
Vcc
VCTL
Pd
Limits
-0.3 to +7.0*1
-0.3 to Vcc*1
1200*2
1300*3
687.6*4
Operating Temperature Range
Topr
-40 to +105
Ambient Storage Temperature
Tstg
-55 to +150
Maximum Junction Temperature
Tjmax
150
*1 Must not exceed Pd
*2 When a 70mm×70mm×1.6mm glass epoxy board is used. Reduce by 9.6 mW/℃ over 25℃.
*3 When a 70mm×70mm×1.6mm glass epoxy board is used. Reduce by 10.4mW/℃ over 25℃.
*4 When a 70mm×70mm×1.6mm glass epoxy board is used. Reduce by 5.5 mW/℃ over 25℃.
Unit.
V
V
mW
℃
℃
℃
●Recommended Operating Ratings (Ta=25℃)
Parameter
Symbol
Input Power Supply Voltage
Vcc
Output Current
Output Voltage Configuration Range*5
Io
Vo
Output Control Terminal Voltage
VCTL
*5 Only BD00KA5WFP and BD00KA5WF
Min.
2.3
0
1.0
0
Max.
5.5
500
4.0
Vcc
Unit.
V
mA
V
V
●Electrical Characteristics
BDxxKA5 Series BDxxKA5W Series
(Unless otherwise specified,Ta=25℃, VCTL =2V, Vcc=2.5V(Vo=1.0V,1.2V,1.5V,1.8V), Vcc=3.3V(Vo=2.5V), Vcc=5.0V(Vo=3.0V,3.3V))
Parameter
Symbol
Min
Limit
Typ
Max
Unit
Conditions
Output Voltage
Vo(T)-0.015 Vo(T) Vo(T)+0.015
Io=200mA (Vo=1.0V,1.2V)
Vo Vo(T)×0.99 Vo(T) Vo(T)×1.01 V Io=200mA (Vo≧1.5V)
Shut Down Current
Isd
-
0
1 μA VCTL=0V, Io=0mA (OFFmode)
Bias Current
Ib - 350 550 μA Io=0mA
Dropout Voltage *6 ΔVd - 0.12 0.20 V Io=200mA, Vcc=0.95×Vo
Peak Output Current
Ripple Rejection
Line Regulation *7
Load Regulation
Io
R.R.
Reg.I
Reg.L
500
-
-
-
-
50
10
25
- mA
-
dB
f=120Hz, ein※9=-10dBV,
Io=100mA
35
mV
Vcc=Vo+0.5V→5.5V,
Io=200mA
75 mV Io=0mA→500mA
Temperature Coefficient
of Output Voltage *8
Tcvo
CTL ON Mode Voltage VCTLON
-
2.0
±100
-
- ppm/℃ Io=5mA,Tj=0 to 125℃
- V ACTIVE MODE, Io=0mA
CTL OFF Mode Voltage VCTLOFF
-
-
0.8
V OFF MODE, Io=0mA
CTL Input Current
ICTL
20
40
60
μA Io=0mA
Vo(T) : Output Voltage
*6 Vo≧2.5V
*7 1.0≦Vo≦1.8V,Vcc=2.3V→5.5V
*8 Not 100% tested
*9 ein : Input Voltage Ripple
www.rohm.com
© 2012 ROHM Co., Ltd. All rights reserved.
TSZ22111・15・001
4/15
TSZ02201-0R6R0A600150-1-2
26.Jun.2012 Rev.001
4페이지 BDxxKA5 Series BDxxKA5W Series BD00KA5W Series
●Typical Performance Curves - continued
Datasheet
Fig.10
Input/Output Voltage Difference
(Vcc=3.135V)
Fig.11
Ripple Rejection
(ein=10dBV,Io=100mA)
TEMPERATURE : Ta[℃]
Fig.12
Output Voltage
(Io=5mA)
TEMPERATURE : Ta[℃]
Fig.13
Circuit Current
Temperature Characteristics
www.rohm.com
© 2012 ROHM Co., Ltd. All rights reserved.
TSZ22111・15・001
7/15
TSZ02201-0R6R0A600150-1-2
26.Jun.2012 Rev.001
7페이지 | |||
구 성 | 총 18 페이지수 | ||
다운로드 | [ BD30KA5FP-E2.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
BD30KA5FP-E2 | 500mA Variable/Fixed Output LDO Regulators | ROHM Semiconductor |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |