Datasheet.kr   

UC1701x PDF 데이터시트 : 부품 기능 및 핀배열

부품번호 UC1701x
기능 HIGH-VOLTAGE MIXED-SIGNAL IC
제조업체 UltraChip
로고 UltraChip 로고 



전체 48 페이지

		

No Preview Available !

UC1701x 데이터시트, 핀배열, 회로
HIGH-VOLTAGE MIXED-SIGNAL IC
65x132 STN Controller-Driver
MP Specifications
Revision 1.0
November 7, 2008
ULTRACHIP
The Coolest LCD Driver, Ever!




UC1701x pdf, 반도체, 판매, 대치품
ULTRACHIP
High-Voltage Mixed-Signal IC
ORDERING INFORMATION
Part Number
UC1701xGAA
I2C
No
Gold Bumped Die
Description
©1999~2008
General Notes
APPLICATION INFORMATION
For improved readability, the specification contains many application data points. When application information is given, it
is advisory and does not form part of the specification for the device.
BARE DIE DISCLAIMER
All die are tested and are guaranteed to comply with all data sheet limits up to the point of. There is no post waffle
saw/pack testing performed on individual die. Although the latest modern processes are utilized for wafer sawing and die
pick-&-place into waffle pack carriers, UltraChip has no control of third party procedures in the handling, packing or
assembly of the die. Accordingly, it is the responsibility of the customer to test and qualify their application in which the die
is to be used. UltraChip assumes no liability for device functionality or performance of the die or systems after handling,
packing or assembly of the die.
LIFE SUPPORT APPLICATIONS
These devices are not designed for use in life support appliances, or systems where malfunction of these products can
reasonably be expected to result in personal injuries. Customer using or selling these products for use in such
applications do so at their own risk.
CONTENT DISCLAIMER
UltraChip believes the information contained in this document to be accurate and reliable. However, it is subject to change
without notice. No responsibility is assumed by UltraChip for its use, nor for infringement of patents or other rights of third
parties. No part of this publication may be reproduced, or transmitted in any form or by any means without the prior
consent of UltraChip Inc. UltraChip's terms and conditions of sale apply at all times.
CONTACT DETAILS
UltraChip Inc. (Headquarter)
2F, No. 70, Chowtze Street,
Nei Hu District, Taipei 114,
Taiwan, R. O. C.
Tel: +886 (2) 8797-8947
Fax: +886 (2) 8797-8910
Sales e-mail: sales@ultrachip.com
Web site: http://www.ultrachip.com
4 MP Specifications

4페이지










UC1701x 전자부품, 판매, 대치품
UC1701X
65x132 STN Controller-Drivers
Name Type
BM0
BM1
I
CS0 I
RST
I
CD I
WR0
WR1
I
DT1
DT2
I
D7~D0
I/O
SEG1 ~
SEG132
HV
COM1 ~
COM64
HV
CIC HV
Pins
1
1
1
1
1
1
1
1
1
8
132
64
2
Description
HOST INTERFACE
Bus mode: The interface bus mode is determined by BM[1:0] and
{D7, D6} by the following relationship:
BM[1:0]
11
10
0x
{D7, D6}
Data
Data
SDA, SCK
Mode
6800/8-bit
8080/8-bit
4-wire SPI w/ 8-bit token
(S8: conventional)
Chip Select. Chip is selected when CS0 = “L”. When the chip is not
selected, D[7:0] will be of high impedance.
When RST=”L”, all control registers are re-initialized by their default states.
Since UC1701x has built-in Power-On Reset and Software Reset command,
RST pin is not required for proper chip operation.
An RC Filter has been included on-chip. There is no need for external RC
noise filter. When RST is not used, connect the pin to VDD.
Select Control data or Display data for read/write operation.
”L”: Control data ”H”: Display data
WR [1:0] controls the read/write operation of the host interface. See Host
Interface section for details.
In parallel mode, the meaning of WR[1:0] depends on which interface it is in,
6800 or 8080 mode. In serial interface modes, these two pins are not used,
Connect them to VSS or VDD.
Duty selection.
DT2 DT1
Duty
00
1/65
01
1/49
10
1/33
11
1/55
Bi-directional bus for both serial and parallel host interfaces.
In serial modes, connect D[7] to SDA, D[6] to SCK.
D7 D6 D5 D4 D3 D2 D1 D0
BM=1x (8-bit) DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0
BM=0x (S8) SDA SCK -- -- -- -- -- --
Always connect unused pins to either VSS or VDD.
HIGH VOLTAGE LCD DRIVER OUTPUT
SEG (column) driver outputs. Support up to 132 pixels.
Leave unused SEG drivers open-circuit.
COM (row) driver outputs. Support up to 64 rows.
When designing LCM, always start from COM1. If the LCM has N pixel
rows and N is less than 64, set CEN to be N-1, and leave COM drivers
[N+1 ~ 64] open-circuit.
Icon driver outputs. Leave it open if not used.
Revision A1.0
7

7페이지



구       성총 48 페이지
다운로드[ UC1701x.PDF 데이터시트 ]
구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

전력 반도체 판매 ( IGBT, TR 모듈, SCR, 다이오드 모듈 )

휴대전화 : 010-3582-2743


상호 : 아이지 인터내셔날

전화번호 : 051-319-2877, [ 홈페이지 ]



링크공유

링크 :

관련 데이터시트

부품번호상세설명 및 기능제조사
UC1701x

HIGH-VOLTAGE MIXED-SIGNAL IC

UltraChip
UltraChip
UC1701xGAA

HIGH-VOLTAGE MIXED-SIGNAL IC

UltraChip
UltraChip

DataSheet.kr    |   2019   |  연락처   |  링크모음   |   검색  |   사이트맵