|
|
PDF STK300 Data sheet ( Hoja de datos )
| Número de pieza | STK300 | |
| Descripción | USER MANUAL | |
| Fabricantes | KANDA SYSTEMS | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de STK300 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
STK300 USER MANUAL
Published by
KANDA SYSTEMS LTD.
www.kanda.com
Page 1
1 page  
Connecting the system
Connect Lead supplied
to Dongle and insert in
PC Printer Port or
Serial Port
Power Supply
9 - 15 V DC
7 - 12V AC
Power Connector
5.5/2.1 Barrel
Plug header on
lead into
Programming
Interface - Key way
gives orientation
On-Off Switch
RS232
On/Off Power Connector
Switch Connector
Programming
Interface
RS 232 Connector
Not used for
programming
Port Headers
A power supply is required with a standard 2.1mm barrel connector. It can be AC (7 - 12 V) or
DC (9 - 15 V). The connector is inserted into the power connection socket as shown.
The programming lead supplied is fitted into the Dongle case and the other end is inserted into the
programming interface on the board as shown.
The Dongle case is connected to one of the printer ports on the PC. If this is not LPT1, then you
will need to change the printer port setting in the software - see software section for details.
Page 5
5 Page 
Yellow
Operation is taking place
This light coding applies for all operations.
3. When a file has been loaded into the Flash memory and the EEPROM memory if required, the
programmer is ready for programming operations. EEPROM data (or Flash data) can be
typed directly into the buffer windows instead of being loaded from a file. The data can be
entered as ASCII characters or as Hexadecimal numbers.
Programming
The programming operations are listed in the Device menu. The programmer must be configured
before programming can be undertaken, and for the Program function, data must be loaded into
the buffer windows
The options listed in the Device menu are:
Option
Description
Erase
The device is erased and code and EEPROM memories will be empty - blank
value is FFh. All Fuse settings will be cleared to default values (see data
book/CD-ROM for device specific fuse information).
Program
Choose Flash, EEPROM, Lock bits or Fuses on the fly-out menu. If Flash or
EEPROM is chosen, then that part of the device is programmed with the
contents of the Flash or EEPROM buffer window respectively. If lock bits are
selected, the security bits are programmed according to the Security Settings
drop-down list described above. If Fuses are chosen, a dialog box appears with
the fuses available on the selected device. Set the fuses to your requirements.
Read
If Flash or EEPROM are selected, the contents of the device memory selected is
uploaded and displayed in the relevant buffer window. If the device is blank,
then all locations will read as FFh. If the security (lock) bits are set, then the
data will be invalid. Selecting Fuses displays the status of the fuses on the
selected device in a list box.
Verify
The contents of the selected memory area (Flash or EEPROM) on the device is
compared with the contents of the equivalent buffer window and any differences
are shown in Red - correct values are shown in Green.
Fuses
Only available with some devices. Used for such functions as clock selection,
etc. You can read or write to the fuses of the selected device.
Run Converts the board operation to run mode. The operating voltage selected
earlier comes into effect.
Auto Program will run all, or a selection of the above options.
Select Auto-Program Options to set the required programming operations. A list of operations is
displayed:
Page 11
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet STK300.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| STK300 | USER MANUAL | KANDA SYSTEMS |
| STK300 | megaAVR Starter Kit User Manual |  ATMEL Corporation |
| STK301-020 | 7-Band 2-Channel Electronic Graphic Equalizer |  Sanyo |
| STK301-090 | 7-Band / 2-Channel Electronic Graphic Equalizer | Sanyo |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |